[Sat Apr 28 10:39:19 2012] Detection parameters:
  Position = (287.7, 357.2) = 17 12 34.60 -23 19 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 794.0 +/- 50.9
  Background counts = 915.5
  Rate = 0.03 +/- 0.002

[Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 4.33'
[Sun Apr 29 22:36:42 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Sun Apr 29 22:36:42 2012] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.694
[Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.59"
[Mon Apr 30 21:31:45 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src14.ximg exists
[Mon Apr 30 21:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src14.csv
[Mon Apr 30 21:31:45 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Apr 30 21:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src14.csv
[Mon Apr 30 21:31:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:31:50 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Apr 30 21:31:50 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Apr 30 21:31:50 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Apr 30 21:33:34 2012] Warning, spatial fit 14 centroid is now closest to src. 66
[Mon Apr 30 21:33:34 2012] Source 57 is offset by 9.352675 and 0.694594 pixels which is larger than
2 X fitted extent = 7.667403 x 7.667403, not incorporating fit results
[Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:35 2012] Assessing source extent using major
[Mon Apr 30 21:33:35 2012] Source does appear to be extended
[Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 00:21:29 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Thu May  3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Thu May  3 00:21:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.694
[Thu May  3 00:21:29 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 8.59"
[Thu May  3 23:17:09 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src14.ximg exists
[Thu May  3 23:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src14.csv
[Thu May  3 23:17:09 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu May  3 23:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src14.csv
[Thu May  3 23:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:11 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu May  3 23:17:11 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu May  3 23:17:11 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu May  3 23:19:07 2012] Source 57 is offset by 8.586307 and 2.534777 pixels which is larger than
2 X fitted extent = 6.190759 x 6.190759, not incorporating fit results
[Thu May  3 23:19:07 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:19:07 2012] Assessing source extent using major
[Thu May  3 23:19:07 2012] Source does appear to be extended
[Thu May  3 23:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:19:08 2012] Source is confused with source 43
[Thu May  3 23:19:08 2012] Source is confused with source 79
[Tue May  8 03:52:40 2012] XMMSAS src. selection expression = ellipse(24980.118683, 31023.663635, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 03:52:40 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src57_src.reg
[Tue May  8 03:52:40 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (250, 320) - (325, 395)
[Tue May  8 03:52:40 2012] XMMSAS bgd. selection expression = annulus(24980.118683, 31023.663635, 1087.500000, 2175.000000, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(25841.041138, 32115.109009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.736000, 27912.240000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(25755.400513, 32988.695953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25030.396973, 29613.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(26532.747955, 29464.534851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28875.264000, 30710.560000, 1809.176052, 1809.176052, 0.000000, X, Y) && !ellipse(24772.708000, 27565.464000, 1858.448053, 1858.448053, 0.000000, X, Y) && !ellipse(24995.884247, 29428.606995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25450.936000, 29073.086000, 582.429617, 582.429617, 0.000000, X, Y) && !ellipse(25034.998138, 29019.875854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.184000, 32085.188000, 2077.216060, 2077.216060, 0.000000, X, Y) && !ellipse(26246.166748, 30132.383575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24740.788000, 32260.322000, 2581.448074, 2581.448074, 0.000000, X, Y) && !ellipse(26225.345114, 31131.647600, 1480.824043, 360.905610, 86.444000, X, Y) && !ellipse(25402.434000, 30209.676800, 1298.200037, 1298.200037, 0.000000, X, Y) && !ellipse(25215.044000, 26897.320000, 2256.976065, 2256.976065, 0.000000, X, Y) && !ellipse(26249.127106, 32599.322632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29913.618400, 30361.900180, 2835.360082, 1033.360030, 90.000000, X, Y) && !ellipse(26244.079895, 30482.106689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.558472, 31610.212708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26745.522003, 30656.398743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27757.263397, 33005.058899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26231.922000, 31589.702000, 1441.912041, 1441.912041, 0.000000, X, Y) && !ellipse(25412.390000, 30369.282000, 649.485619, 649.485619, 0.000000, X, Y) && !ellipse(28259.940000, 33831.282000, 1591.160046, 1591.160046, 0.000000, X, Y) && !ellipse(25887.161652, 30746.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.255580, 33427.234076, 1300.144037, 1300.144037, 0.000000, X, Y) && !ellipse(24419.324000, 28350.592000, 1176.680034, 1176.680034, 0.000000, X, Y) && !ellipse(28542.450200, 33123.142000, 1845.424053, 1845.424053, 0.000000, X, Y) && !ellipse(23996.542000, 29401.962200, 2021.920058, 2021.920058, -0.000000, X, Y) && !ellipse(26768.768000, 33578.054800, 1535.312044, 1535.312044, 0.000000, X, Y)
[Tue May  8 03:52:40 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src57.gif
[Tue May  8 06:09:19 2012] Mean detx,y = (1724.08, 3512.58) 
[Tue May  8 06:09:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 06:09:50 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 06:09:50 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue May  8 06:09:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue May  8 18:24:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 18:24:10 2012] rmf not generated due to insufficient counts
[Wed May  9 07:40:23 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:23 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Wed May  9 07:40:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:32 2012] Using photon index=1.80, rate=0.0309, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src57.arf
[Wed May  9 07:40:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:33 2012] Updating source flux to 4.1e-13
[Wed May  9 07:51:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting