[Sat Apr 28 10:39:22 2012] Detection parameters:
  Position = (301.0, 298.1) = 17 12 30.41 -23 23 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 607.2 +/- 57.9
  Background counts = 1157.0
  Rate = 0.02 +/- 0.002

[Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 0.18'
[Sun Apr 29 22:36:42 2012] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 6.52"
[Sun Apr 29 22:36:42 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 6.52"
[Mon Apr 30 21:31:47 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src53.ximg exists
[Mon Apr 30 21:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src53.csv
[Mon Apr 30 21:31:47 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src53_1.ximg exists
[Mon Apr 30 21:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src53.csv
[Mon Apr 30 21:31:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:31:51 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Mon Apr 30 21:31:51 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Mon Apr 30 21:31:52 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Mon Apr 30 21:33:34 2012] Source 120 is offset by -4.522414 and -6.881566 pixels which is larger than
2 X fitted extent = 3.592579 x 3.592579, not incorporating fit results
[Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:35 2012] Assessing source extent using major
[Mon Apr 30 21:33:35 2012] Source does appear to be extended
[Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 00:21:29 2012] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Thu May  3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 6.52"
[Thu May  3 00:21:29 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Thu May  3 00:21:29 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 6.52"
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src48.ximg exists
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src48_1.ximg exists
[Thu May  3 23:17:10 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src48 appears to have run properly
[Thu May  3 23:17:12 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Thu May  3 23:17:12 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Thu May  3 23:17:12 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Thu May  3 23:19:07 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 120 at 13.522609 pixels away
[Thu May  3 23:19:07 2012] Source 120 is offset by -4.734414 and -6.881566 pixels which is larger than
2 X fitted extent = 3.860294 x 3.860294, not incorporating fit results
[Thu May  3 23:19:08 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:19:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:19:08 2012] Assessing source extent using major
[Thu May  3 23:19:08 2012] Source does appear to be extended
[Thu May  3 23:19:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:19:08 2012] Source is confused with source 99
[Tue May  8 03:52:44 2012] XMMSAS src. selection expression = ellipse(26134.390015, 25887.445740, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 03:52:44 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src120_src.reg
[Tue May  8 03:52:44 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (263, 261) - (338, 336)
[Tue May  8 03:52:44 2012] XMMSAS bgd. selection expression = annulus(26134.390015, 25887.445740, 1087.500000, 2175.000000, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(28295.736000, 27912.240000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(24772.708000, 27565.464000, 1858.448053, 1858.448053, 0.000000, X, Y) && !ellipse(25383.526000, 26690.848000, 1100.056032, 1100.056032, 0.000000, X, Y) && !ellipse(25215.044000, 26897.320000, 2256.976065, 2256.976065, 0.000000, X, Y) && !ellipse(29913.618400, 30361.900180, 2835.360082, 1033.360030, 90.000000, X, Y) && !ellipse(24893.227539, 26238.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28175.109253, 25807.518738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.324000, 28350.592000, 1176.680034, 1176.680034, 0.000000, X, Y) && !ellipse(24498.528229, 26836.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.176000, 24788.604000, 1083.864031, 1083.864031, 0.000000, X, Y) && !ellipse(23996.542000, 29401.962200, 2021.920058, 2021.920058, -0.000000, X, Y) && !ellipse(28961.340424, 26931.777618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.730000, 25080.524200, 1134.032033, 1134.032033, 0.000000, X, Y) && !ellipse(24465.911194, 25534.828644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24496.353600, 26180.744000, 1128.488032, 1128.488032, 0.000000, X, Y) && !ellipse(24463.558000, 27684.638000, 1143.824033, 1143.824033, 0.000000, X, Y) && !ellipse(24559.554077, 25100.747284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25932.573273, 24055.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.270935, 24242.466583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24283.528000, 25877.102000, 1100.056032, 1100.056032, 0.000000, X, Y)
[Tue May  8 03:52:44 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src120.gif
[Tue May  8 09:23:19 2012] Mean detx,y = (976.90, -1629.65) 
[Tue May  8 09:23:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 09:23:45 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 09:23:45 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src120_src_b10.pi.gz
[Tue May  8 09:23:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src120_bgd.pi.gz
[Tue May  8 23:34:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 23:34:45 2012] rmf not generated due to insufficient counts
[Wed May  9 07:40:26 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:26 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src120_src_b10.pi.gz
[Wed May  9 07:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:36 2012] Using photon index=1.80, rate=0.0171, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src120.arf
[Wed May  9 07:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:36 2012] Updating source flux to 1.8e-13
[Wed May  9 07:51:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting