[Sat Apr 28 10:39:21 2012] Detection parameters:
  Position = (324.4, 297.2) = 17 12 23.00 -23 23 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.1 +/- 51.9
  Background counts = 1192.8
  Rate = 0.01 +/- 0.001

[Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 1.89'
[Sun Apr 29 22:36:42 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Sun Apr 29 22:36:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.038
[Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 7.37"
[Mon Apr 30 21:31:49 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src79.ximg exists
[Mon Apr 30 21:31:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src79.csv
[Mon Apr 30 21:31:49 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src79_1.ximg exists
[Mon Apr 30 21:31:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src79.csv
[Mon Apr 30 21:31:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:31:53 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Mon Apr 30 21:31:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src79.csv
[Mon Apr 30 21:31:53 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Mon Apr 30 21:31:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src79.csv
[Mon Apr 30 21:31:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:33:34 2012] Source 117 is offset by -1.660861 and -7.308359 pixels which is larger than
2 X fitted extent = 0.847260 x 0.847260, not incorporating fit results
[Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:35 2012] Assessing source extent using major
[Mon Apr 30 21:33:35 2012] Source does appear to be extended
[Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 00:21:29 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu May  3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu May  3 00:21:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.038
[Thu May  3 00:21:29 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 7.37"
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src71.ximg exists
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src71_1.ximg exists
[Thu May  3 23:17:10 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src71 appears to have run properly
[Thu May  3 23:17:13 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Thu May  3 23:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Thu May  3 23:17:13 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Thu May  3 23:17:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Thu May  3 23:17:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:19:07 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 117 at 15.519081 pixels away
[Thu May  3 23:19:08 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:19:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:19:08 2012] Assessing source extent using major
[Thu May  3 23:19:08 2012] Source does appear to be extended
[Thu May  3 23:19:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 03:52:51 2012] XMMSAS src. selection expression = ellipse(28175.109253, 25807.518738, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 03:52:51 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src117_src.reg
[Tue May  8 03:52:51 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (287, 260) - (362, 335)
[Tue May  8 03:52:51 2012] XMMSAS bgd. selection expression = annulus(28175.109253, 25807.518738, 1087.500000, 2175.000000, X, Y) && !ellipse(30978.610443, 27889.167908, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(30615.375885, 28657.921021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.736000, 27912.240000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(24772.708000, 27565.464000, 1858.448053, 1858.448053, 0.000000, X, Y) && !ellipse(30202.527600, 29280.688000, 1370.488039, 1370.488039, 0.000000, X, Y) && !ellipse(25383.526000, 26690.848000, 1100.056032, 1100.056032, 0.000000, X, Y) && !ellipse(25215.044000, 26897.320000, 2256.976065, 2256.976065, 0.000000, X, Y) && !ellipse(29913.618400, 30361.900180, 2835.360082, 1033.360030, 90.000000, X, Y) && !ellipse(26134.390015, 25887.445740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.166000, 28791.714000, 1391.336040, 936.896027, 96.232060, X, Y) && !ellipse(29617.475608, 27431.144000, 1300.144037, 1300.144037, 0.000000, X, Y) && !ellipse(30233.806000, 28376.692000, 709.098420, 709.098420, 0.000000, X, Y) && !ellipse(26047.176000, 24788.604000, 1083.864031, 1083.864031, 0.000000, X, Y) && !ellipse(23996.542000, 29401.962200, 2021.920058, 2021.920058, -0.000000, X, Y) && !ellipse(28961.340424, 26931.777618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30152.545868, 27975.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.730000, 25080.524200, 1134.032033, 1134.032033, 0.000000, X, Y) && !ellipse(30475.749600, 27024.964000, 1335.152038, 1335.152038, 0.000000, X, Y) && !ellipse(29572.899872, 26931.443085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25932.573273, 24055.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.270935, 24242.466583, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 03:52:51 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src117.gif
[Tue May  8 11:51:26 2012] Mean detx,y = (-1073.23, -1875.53) 
[Tue May  8 11:51:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 11:52:05 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 11:52:06 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Tue May  8 11:52:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src117_bgd.pi.gz
[Wed May  9 01:53:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  9 01:53:30 2012] rmf not generated due to insufficient counts
[Wed May  9 07:40:28 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:28 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Wed May  9 07:40:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:38 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src117.arf
[Wed May  9 07:40:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:38 2012] Updating source flux to 1.1e-13
[Wed May  9 07:51:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting