[Sat Apr 28 10:39:21 2012] Detection parameters:
  Position = (320.1, 325.0) = 17 12 24.36 -23 21 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2281.8 +/- 91.6
  Background counts = 1527.9
  Rate = 0.07 +/- 0.003

[Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 2.49'
[Sun Apr 29 22:36:42 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sun Apr 29 22:36:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.585
[Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.67"
[Mon Apr 30 21:31:44 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src6.ximg exists
[Mon Apr 30 21:31:44 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Apr 30 21:31:44 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src6 appears to have run properly
[Mon Apr 30 21:31:50 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Apr 30 21:31:50 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Apr 30 21:31:50 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Apr 30 21:33:34 2012] Source 109 is offset by 7.173178 and 4.301378 pixels which is larger than
2 X fitted extent = 7.055357 x 7.055357, not incorporating fit results
[Mon Apr 30 21:33:34 2012] Spatial fit model total counts = 18221.400000, observed total counts = 18203.000000
[Mon Apr 30 21:33:34 2012] Offset between fit and detection position for source 109 = 6.746294 pixels
[Mon Apr 30 21:33:34 2012] Warning, changing simple spatial fit ID from 6 to 44
[Mon Apr 30 21:33:34 2012] 18139.393000 total counts/ 17617.200000 bgd. counts: snr = 3.934256
Spatial fit parameters:
  Offset between fit and detection position for source 109 = 6.746294 pixels
  Position = (325.8, 321.4) = 17 12 22.57 -23 22 9.1
  Extent = 15.7 (15.7-15.7)", rotation angle = 0
  Source counts = 522.2 +/- 134.7
  Background counts = 17617.2
  Rate = 0.01 +/- 0.004
[Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:35 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 21:33:35 2012] Source does appear to be extended
[Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 00:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 00:21:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 15.67"
[Thu May  3 00:21:29 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.951
[Thu May  3 00:21:29 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 15.67"
[Thu May  3 23:17:09 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src6.ximg exists
[Thu May  3 23:17:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src6.csv
[Thu May  3 23:17:09 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May  3 23:17:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src6.csv
[Thu May  3 23:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:11 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May  3 23:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May  3 23:17:11 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May  3 23:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May  3 23:17:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:19:07 2012] Warning, spatial fit 6 centroid is now closest to src. 120
[Thu May  3 23:19:07 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 109 at 12.178751 pixels away
[Thu May  3 23:19:07 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:19:07 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:19:07 2012] Source does appear to be extended
[Thu May  3 23:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 03:52:38 2012] XMMSAS src. selection expression = ellipse(28295.736000, 27912.240000, 939.918027, 939.918027, 0.000000, X, Y)
[Tue May  8 03:52:38 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src109_src.reg
[Tue May  8 03:52:38 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (272, 267) - (380, 375)
[Tue May  8 03:52:39 2012] XMMSAS bgd. selection expression = annulus(28295.736000, 27912.240000, 1566.530045, 3133.060090, X, Y) && !ellipse(30978.610443, 27889.167908, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(30615.375885, 28657.921021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25030.396973, 29613.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(26532.747955, 29464.534851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.672668, 30320.779144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28875.264000, 30710.560000, 1809.176052, 1809.176052, 0.000000, X, Y) && !ellipse(24980.118683, 31023.663635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.708000, 27565.464000, 1858.448053, 1858.448053, 0.000000, X, Y) && !ellipse(29544.222000, 31793.876000, 1459.888042, 1459.888042, 0.000000, X, Y) && !ellipse(28646.286000, 30501.550000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(28770.868000, 30224.580000, 863.920025, 863.920025, 0.000000, X, Y) && !ellipse(24995.884247, 29428.606995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25450.936000, 29073.086000, 582.429617, 582.429617, 0.000000, X, Y) && !ellipse(28653.580000, 31079.552000, 984.056028, 984.056028, 0.000000, X, Y) && !ellipse(25034.998138, 29019.875854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30202.527600, 29280.688000, 1370.488039, 1370.488039, 0.000000, X, Y) && !ellipse(28760.560000, 29906.352000, 876.840025, 876.840025, 0.000000, X, Y) && !ellipse(26126.184000, 32085.188000, 2077.216060, 2077.216060, 0.000000, X, Y) && !ellipse(29796.294000, 31516.926000, 1408.832041, 1408.832041, 0.000000, X, Y) && !ellipse(26246.166748, 30132.383575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25383.526000, 26690.848000, 1100.056032, 1100.056032, 0.000000, X, Y) && !ellipse(24740.788000, 32260.322000, 2581.448074, 2581.448074, 0.000000, X, Y) && !ellipse(30054.328000, 30717.564000, 754.124822, 754.124822, 0.000000, X, Y) && !ellipse(26225.345114, 31131.647600, 1480.824043, 360.905610, 86.444000, X, Y) && !ellipse(30422.304810, 31536.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.576000, 29767.299400, 1190.368034, 1190.368034, 0.000000, X, Y) && !ellipse(25402.434000, 30209.676800, 1298.200037, 1298.200037, 0.000000, X, Y) && !ellipse(29975.175600, 29913.212000, 1018.488029, 1018.488029, 0.000000, X, Y) && !ellipse(30582.610168, 31292.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25215.044000, 26897.320000, 2256.976065, 2256.976065, 0.000000, X, Y) && !ellipse(29807.778600, 32672.716000, 2304.784066, 1315.864038, 89.967000, X, Y) && !ellipse(29549.900800, 32253.656600, 2045.200059, 738.294421, 81.791000, X, Y) && !ellipse(29913.618400, 30361.900180, 2835.360082, 1033.360030, 90.000000, X, Y) && !ellipse(26244.079895, 30482.106689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.558472, 31610.212708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.390015, 25887.445740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30676.749542, 29790.978668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.242432, 31887.939392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26745.522003, 30656.398743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31453.516000, 32136.570000, 2592.448075, 2592.448075, 0.000000, X, Y) && !ellipse(30064.166000, 28791.714000, 1391.336040, 936.896027, 96.232060, X, Y) && !ellipse(26231.922000, 31589.702000, 1441.912041, 1441.912041, 0.000000, X, Y) && !ellipse(25412.390000, 30369.282000, 649.485619, 649.485619, 0.000000, X, Y) && !ellipse(29725.924000, 32038.155200, 1026.312030, 1026.312030, 0.000000, X, Y) && !ellipse(29659.040000, 30251.452000, 571.058416, 571.058416, 0.000000, X, Y) && !ellipse(24893.227539, 26238.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25887.161652, 30746.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29617.475608, 27431.144000, 1300.144037, 1300.144037, 0.000000, X, Y) && !ellipse(28175.109253, 25807.518738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.806000, 28376.692000, 709.098420, 709.098420, 0.000000, X, Y) && !ellipse(24419.324000, 28350.592000, 1176.680034, 1176.680034, 0.000000, X, Y) && !ellipse(24498.528229, 26836.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.176000, 24788.604000, 1083.864031, 1083.864031, 0.000000, X, Y) && !ellipse(23996.542000, 29401.962200, 2021.920058, 2021.920058, -0.000000, X, Y) && !ellipse(28961.340424, 26931.777618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31078.454000, 32419.116000, 1462.128042, 1462.128042, 0.000000, X, Y) && !ellipse(30152.545868, 27975.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.730000, 25080.524200, 1134.032033, 1134.032033, 0.000000, X, Y) && !ellipse(24465.911194, 25534.828644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24496.353600, 26180.744000, 1128.488032, 1128.488032, 0.000000, X, Y) && !ellipse(24463.558000, 27684.638000, 1143.824033, 1143.824033, 0.000000, X, Y) && !ellipse(31703.868866, 30243.860291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30475.749600, 27024.964000, 1335.152038, 1335.152038, 0.000000, X, Y) && !ellipse(24559.554077, 25100.747284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.899872, 26931.443085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.082000, 31944.978000, 1488.136043, 1488.136043, 0.000000, X, Y) && !ellipse(31141.910000, 31421.904000, 1296.224037, 1296.224037, 0.000000, X, Y) && !ellipse(31114.940000, 30081.762000, 1479.376043, 1031.616030, 90.000000, X, Y) && !ellipse(30989.657600, 30910.680000, 1488.824043, 1488.824043, 0.000000, X, Y) && !ellipse(25932.573273, 24055.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.270935, 24242.466583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24283.528000, 25877.102000, 1100.056032, 1100.056032, 0.000000, X, Y)
[Tue May  8 03:52:39 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src109.gif
[Tue May  8 04:57:53 2012] Mean detx,y = (-1287.13, 220.91) 
[Tue May  8 04:57:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 04:58:41 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 04:58:42 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Tue May  8 04:58:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src109_bgd.pi.gz
[Wed May  9 07:40:22 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:22 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Wed May  9 07:40:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:32 2012] Using photon index=1.80, rate=0.0147, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src109.arf
[Wed May  9 07:40:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:32 2012] Updating source flux to 1.4e-13
[Wed May  9 07:51:20 2012] Flag b found in src. 109 procflags, skipping spectral fitting