[Sat Apr 28 10:39:16 2012] Detection parameters:
  Position = (327.6, 265.2) = 17 12 21.99 -23 25 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5550.7 +/- 843.3
  Background counts = 593.3
  Rate = 0.2 +/- 0.03

[Sat Apr 28 10:39:16 2012] Off-axis axis estimate = 3.21'
[Sun Apr 29 08:47:09 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 08:47:09 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Sun Apr 29 08:47:09 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Sun Apr 29 08:47:09 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.03"
[Sun Apr 29 22:36:35 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Apr 29 22:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src2.csv
[Sun Apr 29 22:36:35 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Apr 29 22:36:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src2.csv
[Sun Apr 29 22:36:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 22:36:39 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Apr 29 22:36:39 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Apr 29 22:36:39 2012] Fit fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Apr 30 21:33:00 2012] Warning, spatial fit 2 centroid is now closest to src. 99
[Mon Apr 30 21:33:01 2012] Spatial fit model total counts = 5889.970000, observed total counts = 5870.000000
[Mon Apr 30 21:33:01 2012] Offset between fit and detection position for source 98 = 3.639634 pixels
[Mon Apr 30 21:33:01 2012] Warning, changing simple spatial fit ID from 2 to 98
[Mon Apr 30 21:33:01 2012] 5828.873000 total counts/ 4954.200000 bgd. counts: snr = 12.426790
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 3.639634 pixels
  Position = (327.1, 261.6) = 17 12 22.15 -23 26 29.3
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 874.7 +/- 76.3
  Background counts = 4954.2
  Rate = 0.02 +/- 0.002
[Mon Apr 30 21:33:01 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:01 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 21:33:01 2012] Source does appear to be extended
[Mon Apr 30 21:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:33:01 2012] Source is confused with source 99
[Tue May  1 11:40:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 11:40:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 11:40:50 2012] Initial guess for spatial extent in simple fitting = 16.24"
[Tue May  1 11:40:50 2012] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.004
[Tue May  1 11:40:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 16.24"
[Thu May  3 00:21:23 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May  3 00:21:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src2.csv
[Thu May  3 00:21:23 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May  3 00:21:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src2.csv
[Thu May  3 00:21:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 00:21:26 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May  3 00:21:26 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May  3 00:21:26 2012] Fit fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May  3 23:18:28 2012] Warning, spatial fit 2 centroid is now closest to src. 96
[Thu May  3 23:18:29 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:18:29 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:18:29 2012] Source does appear to be extended
[Thu May  3 23:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 00:16:44 2012] XMMSAS src. selection expression = ellipse(28410.147800, 22709.932000, 974.406028, 974.406028, 0.000000, X, Y)
[Sun May  6 00:16:44 2012] Writing source region out to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src98_src.reg
[Sun May  6 00:16:44 2012] Extracting stamp from image fullrun_mos1_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (271, 206) - (383, 318)
[Sun May  6 00:16:44 2012] XMMSAS bgd. selection expression = annulus(28410.147800, 22709.932000, 1624.010047, 3248.020093, X, Y) && !ellipse(26815.951600, 27732.071000, 5167.632149, 5167.632149, 0.000000, X, Y) && !ellipse(29859.416000, 30911.532000, 7691.184221, 7691.184221, 0.000000, X, Y) && !ellipse(25360.846000, 28042.614000, 2487.408072, 2487.408072, 0.000000, X, Y) && !ellipse(25951.692139, 26145.790710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26534.520000, 26140.348000, 2091.696060, 2091.696060, 0.000000, X, Y) && !ellipse(25442.444000, 25703.444000, 1044.112030, 1044.112030, 0.000000, X, Y) && !ellipse(27099.564850, 22066.798843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.048676, 26051.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31317.477142, 22034.103485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24998.289703, 26057.412750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25899.624359, 25450.637665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29169.594000, 25615.444000, 1220.112035, 1220.112035, 0.000000, X, Y) && !ellipse(28168.490000, 22496.424000, 1285.032037, 1285.032037, 0.000000, X, Y) && !ellipse(26860.812000, 25055.034000, 1123.136032, 968.560028, 100.399000, X, Y)
[Sun May  6 00:16:44 2012] Writing fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src98.gif
[Sun May  6 00:25:51 2012] Mean detx,y = (-4715.68, 828.44) 
[Sun May  6 00:25:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 00:26:48 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 00:26:48 2012] Setting source spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Sun May  6 00:26:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Wed May  9 07:40:04 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:04 2012] Error reading totcts from fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Wed May  9 07:40:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:13 2012] Using photon index=1.80, rate=0.0244, arf fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src98.arf
[Wed May  9 07:40:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:13 2012] Updating source flux to 2.7e-13
[Wed May  9 07:40:46 2012] Flag c found in src. 98 procflags, skipping spectral fitting