[Sat Apr 28 10:39:15 2012] Detection parameters:
  Position = (287.9, 300.1) = 17 12 34.54 -23 23 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 290.7 +/- 49.0
  Background counts = 1089.7
  Rate = 0.009 +/- 0.001

[Sat Apr 28 10:39:16 2012] Off-axis axis estimate = 0.77'
[Sun Apr 29 08:47:09 2012] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 08:47:09 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Sun Apr 29 08:47:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.936
[Sun Apr 29 08:47:09 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 6.82"
[Sun Apr 29 22:36:38 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src81.ximg exists
[Sun Apr 29 22:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src81.csv
[Sun Apr 29 22:36:38 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src81_1.ximg exists
[Sun Apr 29 22:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src81.csv
[Sun Apr 29 22:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 22:36:41 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sun Apr 29 22:36:41 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sun Apr 29 22:36:41 2012] Fit fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Mon Apr 30 21:33:00 2012] Source 89 is offset by 6.271307 and -2.554865 pixels which is larger than
2 X fitted extent = 0.797145 x 0.797145, not incorporating fit results
[Mon Apr 30 21:33:00 2012] Warning, spatial fit 81 centroid is now closest to src. 90
[Mon Apr 30 21:33:01 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:01 2012] Assessing source extent using major
[Mon Apr 30 21:33:01 2012] Source does appear to be extended
[Mon Apr 30 21:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:33:01 2012] Source is confused with source 92
[Tue May  1 11:40:50 2012] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:40:50 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Tue May  1 11:40:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.936
[Tue May  1 11:40:50 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 6.82"
[Thu May  3 00:21:25 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src75.ximg exists
[Thu May  3 00:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src75.csv
[Thu May  3 00:21:25 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src75_1.ximg exists
[Thu May  3 00:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src75.csv
[Thu May  3 00:21:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Thu May  3 00:21:29 2012] Fit fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Thu May  3 23:18:29 2012] Warning, spatial fit 75 centroid is now closest to src. 85
[Thu May  3 23:18:29 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:18:29 2012] Assessing source extent using major
[Thu May  3 23:18:29 2012] Source does appear to be extended
[Thu May  3 23:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 00:16:57 2012] XMMSAS src. selection expression = ellipse(24998.289703, 26057.412750, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  6 00:16:57 2012] Writing source region out to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src89_src.reg
[Sun May  6 00:16:57 2012] Extracting stamp from image fullrun_mos1_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (250, 263) - (325, 338)
[Sun May  6 00:16:57 2012] XMMSAS bgd. selection expression = annulus(24998.289703, 26057.412750, 1087.500000, 2175.000000, X, Y) && !ellipse(26815.951600, 27732.071000, 5167.632149, 5167.632149, 0.000000, X, Y) && !ellipse(28410.147800, 22709.932000, 1299.208037, 1299.208037, 0.000000, X, Y) && !ellipse(29859.416000, 30911.532000, 7691.184221, 7691.184221, 0.000000, X, Y) && !ellipse(25983.590000, 28629.146000, 1228.256035, 1228.256035, 0.000000, X, Y) && !ellipse(25243.306000, 28638.186600, 1223.568035, 1223.568035, 0.000000, X, Y) && !ellipse(24441.994690, 28786.456299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24896.662000, 29480.364000, 2447.136070, 331.538410, -0.000000, X, Y) && !ellipse(25913.586000, 29851.920600, 2581.072074, 951.336027, 352.140000, X, Y) && !ellipse(25280.894000, 30207.092000, 2584.592074, 2584.592074, 0.000000, X, Y) && !ellipse(25360.846000, 28042.614000, 2487.408072, 2487.408072, 0.000000, X, Y) && !ellipse(25951.692139, 26145.790710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29824.915400, 28920.354000, 2700.416078, 969.912028, 0.002000, X, Y) && !ellipse(24748.538000, 28520.526000, 1243.704036, 1243.704036, 0.000000, X, Y) && !ellipse(26534.520000, 26140.348000, 2091.696060, 2091.696060, 0.000000, X, Y) && !ellipse(25442.444000, 25703.444000, 1044.112030, 1044.112030, 0.000000, X, Y) && !ellipse(25899.624359, 25450.637665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24369.910645, 27082.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.812000, 25055.034000, 1123.136032, 968.560028, 100.399000, X, Y)
[Sun May  6 00:16:57 2012] Writing fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src89.gif
[Sun May  6 07:19:54 2012] Mean detx,y = (-1168.93, -2252.17) 
[Sun May  6 07:19:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 07:20:21 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 07:20:21 2012] Setting source spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Sun May  6 07:20:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src89_bgd.pi.gz
[Tue May  8 01:45:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 01:45:34 2012] rmf not generated due to insufficient counts
[Wed May  9 07:40:11 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:11 2012] Error reading totcts from fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Wed May  9 07:40:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:21 2012] Using photon index=1.80, rate=0.00887, arf fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src89.arf
[Wed May  9 07:40:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:21 2012] Updating source flux to 9.4e-14
[Wed May  9 07:40:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting