[Sat Apr 28 10:39:15 2012] Detection parameters:
  Position = (331.3, 301.8) = 17 12 20.83 -23 23 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.5 +/- 49.8
  Background counts = 1257.0
  Rate = 0.007 +/- 0.001

[Sat Apr 28 10:39:16 2012] Off-axis axis estimate = 2.39'
[Sun Apr 29 08:47:09 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 08:47:09 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Apr 29 08:47:09 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.985
[Sun Apr 29 08:47:09 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 7.63"
[Sun Apr 29 22:36:39 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src96.ximg exists
[Sun Apr 29 22:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src96.csv
[Sun Apr 29 22:36:39 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src96_1.ximg exists
[Sun Apr 29 22:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src96.csv
[Sun Apr 29 22:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 22:36:42 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Sun Apr 29 22:36:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src96.csv
[Sun Apr 29 22:36:42 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Sun Apr 29 22:36:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src96.csv
[Sun Apr 29 22:36:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:33:01 2012] Warning, spatial fit 96 centroid is now closest to src. 84
[Mon Apr 30 21:33:01 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:01 2012] Assessing source extent using major
[Mon Apr 30 21:33:01 2012] Source does appear to be extended
[Mon Apr 30 21:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 11:40:50 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:40:50 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Tue May  1 11:40:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.985
[Tue May  1 11:40:50 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 7.63"
[Thu May  3 00:21:26 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src87.ximg exists
[Thu May  3 00:21:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src87.csv
[Thu May  3 00:21:26 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src87_1.ximg exists
[Thu May  3 00:21:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src87.csv
[Thu May  3 00:21:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Thu May  3 00:21:29 2012] Fit fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Thu May  3 23:18:29 2012] Spatial fit model total counts = 14165.900000, observed total counts = 14184.000000
[Thu May  3 23:18:29 2012] Offset between fit and detection position for source 86 = 8.202895 pixels
[Thu May  3 23:18:29 2012] 14167.786000 total counts/ 13600.000000 bgd. counts: snr = 4.868725
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 8.202895 pixels
  Position = (335.8, 295.0) = 17 12 19.39 -23 24 4.0
  Extent = 15.3 (15.2-30.5)", rotation angle = 0
  Source counts = 567.8 +/- 119.0
  Background counts = 13600.0
  Rate = 0.02 +/- 0.003
[Thu May  3 23:18:29 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:18:29 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:18:29 2012] Source does appear to be extended
[Thu May  3 23:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 00:16:58 2012] XMMSAS src. selection expression = ellipse(29169.594000, 25615.444000, 915.084026, 915.084026, 0.000000, X, Y)
[Sun May  6 00:16:58 2012] Writing source region out to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src86_src.reg
[Sun May  6 00:16:58 2012] Extracting stamp from image fullrun_mos1_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (283, 242) - (388, 348)
[Sun May  6 00:16:58 2012] XMMSAS bgd. selection expression = annulus(29169.594000, 25615.444000, 1525.140044, 3050.280088, X, Y) && !ellipse(26815.951600, 27732.071000, 5167.632149, 5167.632149, 0.000000, X, Y) && !ellipse(28410.147800, 22709.932000, 1299.208037, 1299.208037, 0.000000, X, Y) && !ellipse(29859.416000, 30911.532000, 7691.184221, 7691.184221, 0.000000, X, Y) && !ellipse(28701.470000, 28703.177800, 1318.080038, 1318.080038, 0.000000, X, Y) && !ellipse(29673.464000, 29987.586000, 1456.072042, 1456.072042, 0.000000, X, Y) && !ellipse(29997.556000, 29113.642200, 1350.208039, 1350.208039, 0.000000, X, Y) && !ellipse(25983.590000, 28629.146000, 1228.256035, 1228.256035, 0.000000, X, Y) && !ellipse(28468.370000, 30165.224000, 1823.664052, 1823.664052, 0.000000, X, Y) && !ellipse(25243.306000, 28638.186600, 1223.568035, 1223.568035, 0.000000, X, Y) && !ellipse(24896.662000, 29480.364000, 2447.136070, 331.538410, -0.000000, X, Y) && !ellipse(25913.586000, 29851.920600, 2581.072074, 951.336027, 352.140000, X, Y) && !ellipse(25280.894000, 30207.092000, 2584.592074, 2584.592074, 0.000000, X, Y) && !ellipse(28974.757200, 29825.494000, 1324.184038, 499.477614, 355.163000, X, Y) && !ellipse(25360.846000, 28042.614000, 2487.408072, 2487.408072, 0.000000, X, Y) && !ellipse(29343.618000, 28983.334800, 1350.208039, 1350.208039, 0.000000, X, Y) && !ellipse(30434.216000, 30091.726000, 1428.840041, 1428.840041, 0.000000, X, Y) && !ellipse(25951.692139, 26145.790710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29824.915400, 28920.354000, 2700.416078, 969.912028, 0.002000, X, Y) && !ellipse(26534.520000, 26140.348000, 2091.696060, 2091.696060, 0.000000, X, Y) && !ellipse(25442.444000, 25703.444000, 1044.112030, 1044.112030, 0.000000, X, Y) && !ellipse(24868.858000, 29861.230000, 1272.008037, 1272.008037, 0.000000, X, Y) && !ellipse(27099.564850, 22066.798843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.048676, 26051.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28553.748291, 26833.838898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31317.477142, 22034.103485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25899.624359, 25450.637665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30324.753723, 28771.359802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28168.490000, 22496.424000, 1285.032037, 1285.032037, 0.000000, X, Y) && !ellipse(26860.812000, 25055.034000, 1123.136032, 968.560028, 100.399000, X, Y)
[Sun May  6 00:16:58 2012] Writing fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src86.gif
[Sun May  6 07:45:42 2012] Mean detx,y = (-1924.83, 1796.77) 
[Sun May  6 07:45:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 07:46:13 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 07:46:14 2012] Setting source spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sun May  6 07:46:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Wed May  9 07:40:12 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:12 2012] Error reading totcts from fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Wed May  9 07:40:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:21 2012] Using photon index=1.80, rate=0.0159, arf fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src86.arf
[Wed May  9 07:40:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:21 2012] Updating source flux to 1.6e-13