[Sat Apr 28 10:39:15 2012] Detection parameters:
  Position = (349.1, 331.3) = 17 12 15.20 -23 21 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.2 +/- 49.6
  Background counts = 1238.0
  Rate = 0.008 +/- 0.001

[Sat Apr 28 10:39:16 2012] Off-axis axis estimate = 4.38'
[Sun Apr 29 08:47:09 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 08:47:09 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Sun Apr 29 08:47:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.015
[Sun Apr 29 08:47:09 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 8.62"
[Sun Apr 29 22:36:38 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src85.ximg exists
[Sun Apr 29 22:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src85.csv
[Sun Apr 29 22:36:38 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src85_1.ximg exists
[Sun Apr 29 22:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src85.csv
[Sun Apr 29 22:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 22:36:41 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sun Apr 29 22:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sun Apr 29 22:36:41 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sun Apr 29 22:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sun Apr 29 22:36:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:33:01 2012] Warning, spatial fit 85 centroid is now closest to src. 71
[Mon Apr 30 21:33:01 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:01 2012] Assessing source extent using major
[Mon Apr 30 21:33:01 2012] Source does appear to be extended
[Mon Apr 30 21:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:33:01 2012] Source is confused with source 71
[Tue May  1 11:40:50 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:40:50 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Tue May  1 11:40:50 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.015
[Tue May  1 11:40:50 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 8.62"
[Thu May  3 00:21:25 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src79.ximg exists
[Thu May  3 00:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src79.csv
[Thu May  3 00:21:25 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src79_1.ximg exists
[Thu May  3 00:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src79.csv
[Thu May  3 00:21:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Thu May  3 00:21:29 2012] Fit fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Thu May  3 23:18:28 2012] Source 74 is offset by -9.118601 and 2.499216 pixels which is larger than
2 X fitted extent = 2.092060 x 2.092060, not incorporating fit results
[Thu May  3 23:18:29 2012] Warning, spatial fit 79 centroid is now closest to src. 68
[Thu May  3 23:18:29 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:18:29 2012] Assessing source extent using major
[Thu May  3 23:18:29 2012] Source does appear to be extended
[Thu May  3 23:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 00:16:57 2012] XMMSAS src. selection expression = ellipse(30324.753723, 28771.359802, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  6 00:16:57 2012] Writing source region out to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src74_src.reg
[Sun May  6 00:16:57 2012] Extracting stamp from image fullrun_mos1_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (312, 294) - (387, 369)
[Sun May  6 00:16:58 2012] XMMSAS bgd. selection expression = annulus(30324.753723, 28771.359802, 1087.500000, 2175.000000, X, Y) && !ellipse(26815.951600, 27732.071000, 5167.632149, 5167.632149, 0.000000, X, Y) && !ellipse(28357.606000, 30818.690000, 1427.896041, 1427.896041, 0.000000, X, Y) && !ellipse(31277.538000, 31489.132000, 1505.848043, 1505.848043, 0.000000, X, Y) && !ellipse(29859.416000, 30911.532000, 7691.184221, 7691.184221, 0.000000, X, Y) && !ellipse(28701.470000, 28703.177800, 1318.080038, 1318.080038, 0.000000, X, Y) && !ellipse(28072.850800, 31503.406189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27962.838000, 30535.092000, 1464.088042, 1464.088042, 0.000000, X, Y) && !ellipse(29673.464000, 29987.586000, 1456.072042, 1456.072042, 0.000000, X, Y) && !ellipse(30246.574000, 31047.218000, 884.360025, 884.360025, 0.000000, X, Y) && !ellipse(26108.764000, 32174.053600, 2250.672065, 2250.672065, 0.000000, X, Y) && !ellipse(27463.949036, 29670.997894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29997.556000, 29113.642200, 1350.208039, 1350.208039, 0.000000, X, Y) && !ellipse(30130.268000, 32555.080000, 2828.160081, 2828.160081, 0.000000, X, Y) && !ellipse(28468.370000, 30165.224000, 1823.664052, 1823.664052, 0.000000, X, Y) && !ellipse(30315.591217, 31689.691010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27550.726013, 30048.673157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29625.190000, 32372.553200, 1499.064043, 1499.064043, 0.000000, X, Y) && !ellipse(25913.586000, 29851.920600, 2581.072074, 951.336027, 352.140000, X, Y) && !ellipse(29339.837000, 30573.915400, 1281.864037, 1281.864037, 0.000000, X, Y) && !ellipse(28974.757200, 29825.494000, 1324.184038, 499.477614, 355.163000, X, Y) && !ellipse(28252.350000, 31990.994000, 1519.408044, 1519.408044, 0.000000, X, Y) && !ellipse(30707.474000, 31037.226000, 1512.544044, 1512.544044, 0.000000, X, Y) && !ellipse(29355.496000, 31109.122000, 1414.080041, 1414.080041, 0.000000, X, Y) && !ellipse(29343.618000, 28983.334800, 1350.208039, 1350.208039, 0.000000, X, Y) && !ellipse(30434.216000, 30091.726000, 1428.840041, 1428.840041, 0.000000, X, Y) && !ellipse(28220.153400, 32217.602000, 3113.520090, 3113.520090, 0.000000, X, Y) && !ellipse(27594.194000, 32177.980000, 1465.840042, 1465.840042, 0.000000, X, Y) && !ellipse(29824.915400, 28920.354000, 2700.416078, 969.912028, 0.002000, X, Y) && !ellipse(30074.494000, 30128.988000, 1037.112030, 1037.112030, 0.000000, X, Y) && !ellipse(26534.520000, 26140.348000, 2091.696060, 2091.696060, 0.000000, X, Y) && !ellipse(29850.706000, 33207.098000, 2998.128086, 2998.128086, 0.000000, X, Y) && !ellipse(28125.048676, 26051.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28553.748291, 26833.838898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29169.594000, 25615.444000, 1220.112035, 1220.112035, 0.000000, X, Y)
[Sun May  6 00:16:58 2012] Writing fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src74.gif
[Sun May  6 07:40:40 2012] Mean detx,y = (1101.20, 3207.94) 
[Sun May  6 07:40:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 07:41:15 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 07:41:16 2012] Setting source spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sun May  6 07:41:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Tue May  8 03:00:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 03:00:02 2012] rmf not generated due to insufficient counts
[Wed May  9 07:40:12 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:12 2012] Error reading totcts from fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed May  9 07:40:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:21 2012] Using photon index=1.80, rate=0.00803, arf fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src74.arf
[Wed May  9 07:40:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:21 2012] Updating source flux to 8.3e-14
[Wed May  9 07:40:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting