[Sat Apr 28 10:39:12 2012] Detection parameters:
  Position = (301.5, 385.6) = 17 12 30.26 -23 17 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.1 +/- 38.7
  Background counts = 785.9
  Rate = 0.008 +/- 0.001

[Sat Apr 28 10:39:16 2012] Off-axis axis estimate = 6.32'
[Sun Apr 29 08:47:09 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 08:47:09 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Sun Apr 29 08:47:09 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.855
[Sun Apr 29 08:47:09 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 9.59"
[Sun Apr 29 22:36:38 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src87.ximg exists
[Sun Apr 29 22:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src87.csv
[Sun Apr 29 22:36:38 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src87_1.ximg exists
[Sun Apr 29 22:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src87.csv
[Sun Apr 29 22:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 22:36:41 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Sun Apr 29 22:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src87.csv
[Sun Apr 29 22:36:41 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Sun Apr 29 22:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src87.csv
[Sun Apr 29 22:36:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:33:00 2012] Spatial fit model total counts = 8993.000000, observed total counts = 8105.000000
[Mon Apr 30 21:33:00 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 21:33:01 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.325777 pixels away
[Mon Apr 30 21:33:01 2012] Spatial fit model total counts = 10874.800000, observed total counts = 10868.000000
[Mon Apr 30 21:33:01 2012] Offset between fit and detection position for source 17 = 0.570642 pixels
[Mon Apr 30 21:33:01 2012] Warning, changing simple spatial fit ID from 87 to 89
[Mon Apr 30 21:33:01 2012] 10756.744000 total counts/ 10549.900000 bgd. counts: snr = 2.013811
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.570642 pixels
  Position = (301.5, 386.1) = 17 12 30.24 -23 17 27.5
  Extent = 11.0 (5.9-18.6)", rotation angle = 0
  Source counts = 206.8 +/- 103.7
  Background counts = 10549.9
  Rate = 0.006 +/- 0.003
[Mon Apr 30 21:33:01 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:01 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 21:33:01 2012] Source does appear to be extended
[Mon Apr 30 21:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:33:01 2012] Source is confused with source 7
[Tue May  1 11:40:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 11:40:50 2012] Initial guess for spatial extent in simple fitting = 10.96"
[Tue May  1 11:40:50 2012] source mask rpix=2.5, npix_max = 36, mask sum = 42, frac = 1.151
[Tue May  1 11:40:50 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 10.96"
[Thu May  3 00:21:25 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src81.ximg exists
[Thu May  3 00:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src81.csv
[Thu May  3 00:21:25 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src81_1.ximg exists
[Thu May  3 00:21:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src81.csv
[Thu May  3 00:21:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Thu May  3 00:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src81.csv
[Thu May  3 00:21:29 2012] fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Thu May  3 00:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src81.csv
[Thu May  3 00:21:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:18:29 2012] Warning, spatial fit 81 centroid is now closest to src. 7
[Thu May  3 23:18:29 2012] Spatial fit model total counts = 12060.200000, observed total counts = 12053.000000
[Thu May  3 23:18:29 2012] Offset between fit and detection position for source 17 = 0.527538 pixels
[Thu May  3 23:18:29 2012] Warning, changing simple spatial fit ID from 81 to 86
[Thu May  3 23:18:29 2012] 11860.250000 total counts/ 11433.600000 bgd. counts: snr = 3.990068
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.527538 pixels
  Position = (301.7, 386.6) = 17 12 30.19 -23 17 25.3
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source counts = 426.6 +/- 108.9
  Background counts = 11433.6
  Rate = 0.01 +/- 0.003
[Thu May  3 23:18:29 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:18:29 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:18:29 2012] Source does appear to be extended
[Thu May  3 23:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 00:16:58 2012] XMMSAS src. selection expression = ellipse(26196.042000, 33589.002000, 1132.152033, 1132.152033, 0.000000, X, Y)
[Sun May  6 00:16:58 2012] Writing source region out to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src17_src.reg
[Sun May  6 00:16:58 2012] Extracting stamp from image fullrun_mos1_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (237, 322) - (367, 452)
[Sun May  6 00:16:58 2012] XMMSAS bgd. selection expression = annulus(26196.042000, 33589.002000, 1886.920054, 3773.840109, X, Y) && !ellipse(26815.951600, 27732.071000, 5167.632149, 5167.632149, 0.000000, X, Y) && !ellipse(27921.652191, 34433.249603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.606000, 30818.690000, 1427.896041, 1427.896041, 0.000000, X, Y) && !ellipse(31277.538000, 31489.132000, 1505.848043, 1505.848043, 0.000000, X, Y) && !ellipse(29160.568512, 32182.615784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29859.416000, 30911.532000, 7691.184221, 7691.184221, 0.000000, X, Y) && !ellipse(28701.470000, 28703.177800, 1318.080038, 1318.080038, 0.000000, X, Y) && !ellipse(30001.166718, 34569.210999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28072.850800, 31503.406189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27182.170776, 29633.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27962.838000, 30535.092000, 1464.088042, 1464.088042, 0.000000, X, Y) && !ellipse(29673.464000, 29987.586000, 1456.072042, 1456.072042, 0.000000, X, Y) && !ellipse(30246.574000, 31047.218000, 884.360025, 884.360025, 0.000000, X, Y) && !ellipse(26108.764000, 32174.053600, 2250.672065, 2250.672065, 0.000000, X, Y) && !ellipse(27463.949036, 29670.997894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29997.556000, 29113.642200, 1350.208039, 1350.208039, 0.000000, X, Y) && !ellipse(25983.590000, 28629.146000, 1228.256035, 1228.256035, 0.000000, X, Y) && !ellipse(27070.295807, 31043.058624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30130.268000, 32555.080000, 2828.160081, 2828.160081, 0.000000, X, Y) && !ellipse(28468.370000, 30165.224000, 1823.664052, 1823.664052, 0.000000, X, Y) && !ellipse(30315.591217, 31689.691010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.801544, 33660.752899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27550.726013, 30048.673157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29625.190000, 32372.553200, 1499.064043, 1499.064043, 0.000000, X, Y) && !ellipse(25243.306000, 28638.186600, 1223.568035, 1223.568035, 0.000000, X, Y) && !ellipse(24896.662000, 29480.364000, 2447.136070, 331.538410, -0.000000, X, Y) && !ellipse(25913.586000, 29851.920600, 2581.072074, 951.336027, 352.140000, X, Y) && !ellipse(25280.894000, 30207.092000, 2584.592074, 2584.592074, 0.000000, X, Y) && !ellipse(27150.952942, 30307.756226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29339.837000, 30573.915400, 1281.864037, 1281.864037, 0.000000, X, Y) && !ellipse(28974.757200, 29825.494000, 1324.184038, 499.477614, 355.163000, X, Y) && !ellipse(28252.350000, 31990.994000, 1519.408044, 1519.408044, 0.000000, X, Y) && !ellipse(30707.474000, 31037.226000, 1512.544044, 1512.544044, 0.000000, X, Y) && !ellipse(29355.496000, 31109.122000, 1414.080041, 1414.080041, 0.000000, X, Y) && !ellipse(25360.846000, 28042.614000, 2487.408072, 2487.408072, 0.000000, X, Y) && !ellipse(29343.618000, 28983.334800, 1350.208039, 1350.208039, 0.000000, X, Y) && !ellipse(30434.216000, 30091.726000, 1428.840041, 1428.840041, 0.000000, X, Y) && !ellipse(26132.473083, 30309.612091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.153400, 32217.602000, 3113.520090, 3113.520090, 0.000000, X, Y) && !ellipse(26382.536000, 30663.312000, 1390.376040, 1390.376040, 0.000000, X, Y) && !ellipse(28168.384064, 34475.249512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25267.435333, 30933.278473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.324000, 30637.156200, 1345.216039, 1345.216039, 0.000000, X, Y) && !ellipse(27594.194000, 32177.980000, 1465.840042, 1465.840042, 0.000000, X, Y) && !ellipse(29824.915400, 28920.354000, 2700.416078, 969.912028, 0.002000, X, Y) && !ellipse(28854.621521, 32665.934662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.718000, 30645.493800, 1336.632038, 1336.632038, 0.000000, X, Y) && !ellipse(30074.494000, 30128.988000, 1037.112030, 1037.112030, 0.000000, X, Y) && !ellipse(29263.169464, 33353.698761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29850.706000, 33207.098000, 2998.128086, 2998.128086, 0.000000, X, Y) && !ellipse(24868.858000, 29861.230000, 1272.008037, 1272.008037, 0.000000, X, Y) && !ellipse(26747.858000, 32154.284400, 1315.744038, 934.928027, 354.272000, X, Y) && !ellipse(29292.443817, 33786.824310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.705383, 34604.533508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28331.378000, 33624.880060, 1556.760045, 1556.760045, 0.000000, X, Y) && !ellipse(28834.106110, 33269.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.433838, 33005.948334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30151.929901, 33616.432495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.490000, 29632.636400, 1292.296037, 1292.296037, 0.000000, X, Y) && !ellipse(30698.868000, 33793.139200, 1614.528046, 1614.528046, 0.000000, X, Y) && !ellipse(24365.325409, 30037.317596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31202.500000, 33912.926000, 1628.952047, 1628.952047, 0.000000, X, Y)
[Sun May  6 00:16:58 2012] Writing fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src17.gif
[Sun May  6 07:41:40 2012] Mean detx,y = (6083.81, -438.69) 
[Sun May  6 07:41:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 07:42:20 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 07:42:20 2012] Setting source spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun May  6 07:42:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed May  9 07:40:12 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:12 2012] Error reading totcts from fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May  9 07:40:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:21 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0505150101_pi300-10000_pass1_cl_src17.arf
[Wed May  9 07:40:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:21 2012] Updating source flux to 1.4e-13
[Wed May  9 07:40:46 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Wed May  9 07:40:46 2012] Flag c found in src. 17 procflags, skipping spectral fitting