[Sat Mar 24 05:46:48 2012] Detection parameters:
  Position = (344.2, 247.8) = 3 33 11.59 -36 11 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1997.6 +/- 62.1
  Background counts = 349.3
  Rate = 0.03 +/- 0.0009

[Sat Mar 24 05:46:49 2012] Off-axis axis estimate = 4.95'
[Sat Mar 24 06:00:44 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 06:00:44 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Sat Mar 24 06:00:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Sat Mar 24 06:00:44 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 8.90"
[Sat Mar 24 10:40:58 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src56.ximg exists
[Sat Mar 24 10:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src56.csv
[Sat Mar 24 10:40:58 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat Mar 24 10:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src56.csv
[Sat Mar 24 10:40:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 10:41:00 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat Mar 24 10:41:00 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Mar 24 10:41:00 2012] Fit fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sat Mar 24 15:14:26 2012] Spatial fit model total counts = 3054.490000, observed total counts = 2847.000000
[Sat Mar 24 15:14:26 2012] Offset between fit and detection position for source 56 = 1.605882 pixels
[Sat Mar 24 15:14:26 2012] 3052.550000 total counts/ 1301.420000 bgd. counts: snr = 48.541104
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 1.605882 pixels
  Position = (343.2, 246.5) = 3 33 11.96 -36 11 45.3
  Extent = 10.7 (10.1-11.3)", rotation angle = 0
  Source counts = 1751.1 +/- 55.2
  Background counts = 1301.4
  Rate = 0.03 +/- 0.001
[Sat Mar 24 15:14:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:26 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 15:14:26 2012] Source does appear to be extended
[Sat Mar 24 15:14:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 15:14:26 2012] Source is confused with source 72
[Sat Mar 24 15:15:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 24 15:15:23 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Sat Mar 24 15:15:23 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.862
[Sat Mar 24 15:15:23 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 10.65"
[Sat Mar 24 20:27:05 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src52.ximg exists
[Sat Mar 24 20:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src52.csv
[Sat Mar 24 20:27:05 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Mar 24 20:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src52.csv
[Sat Mar 24 20:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Mar 24 20:27:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Mar 24 20:27:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Mar 24 20:27:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:21:42 2012] Warning, spatial fit 52 centroid is now closest to src. 72
[Sun Mar 25 00:21:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:42 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 00:21:42 2012] Source does appear to be extended
[Sun Mar 25 00:21:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 00:22:35 2012] Counts = 1751.130000, rescaling region sizes by 2.000000
[Sun Mar 25 00:22:35 2012] XMMSAS src. selection expression = ellipse(29810.537000, 21400.727800, 1278.552037, 1278.552037, 0.000000, X, Y)
[Sun Mar 25 00:22:35 2012] Writing source region out to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src56_src.reg
[Sun Mar 25 00:22:35 2012] Extracting stamp from image fullrun_pn_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (270, 173) - (417, 320)
[Sun Mar 25 00:22:35 2012] XMMSAS bgd. selection expression = annulus(29810.537000, 21400.727800, 4261.840123, 8523.680245, X, Y) && !ellipse(23932.892822, 25348.535858, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(35226.585632, 30701.810364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25906.587000, 27395.420200, 680.012820, 680.012820, 0.000000, X, Y) && !ellipse(34325.211151, 27278.665161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.406600, 27423.829680, 368.719211, 368.719211, 0.000000, X, Y) && !ellipse(32797.328000, 26906.546000, 393.652811, 393.652811, 0.000000, X, Y) && !ellipse(25197.488000, 27015.444000, 1358.288039, 1358.288039, 0.000000, X, Y) && !ellipse(22051.491272, 26677.847961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23003.613983, 26538.743011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32390.066498, 26526.065247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22595.140381, 26391.521637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27177.938660, 26063.431702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38089.471863, 25783.716400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31985.874320, 25477.316400, 429.766412, 429.766412, 0.000000, X, Y) && !ellipse(27571.915802, 25542.366272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25141.253200, 25697.864800, 383.460811, 383.460811, 0.000000, X, Y) && !ellipse(26433.006470, 25213.416107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25722.499390, 25194.334412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22487.009003, 25107.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.609436, 24589.144379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.853027, 24601.702667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.997345, 24093.280487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.380000, 24089.846000, 501.767214, 207.552806, 44.136000, X, Y) && !ellipse(23922.195709, 23616.734589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23018.026000, 23351.822400, 1271.744037, 1271.744037, 0.000000, X, Y) && !ellipse(22544.893951, 23708.558777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21969.083145, 23488.263031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20739.070465, 23124.152313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23740.798798, 22944.109467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23107.139100, 22752.857600, 375.069611, 375.069611, 0.000000, X, Y) && !ellipse(38435.387665, 21545.296661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32713.243000, 19974.116800, 372.476111, 372.476111, 0.000000, X, Y) && !ellipse(22343.579010, 18632.213120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28831.925800, 13677.312600, 453.952013, 274.329608, -0.000000, X, Y) && !ellipse(28883.948975, 13000.825623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.474915, 12431.402817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.454773, 21751.344193, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Mar 25 00:22:35 2012] Writing fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src56.gif
[Sun Mar 25 02:08:51 2012] Mean detx,y = (-6935.32, 804.96) 
[Sun Mar 25 02:09:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 02:12:10 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 02:12:11 2012] Setting source spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun Mar 25 02:12:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sun Mar 25 12:59:09 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:09 2012] Error reading totcts from fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun Mar 25 12:59:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:14 2012] Using photon index=1.80, rate=0.0306, arf fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src56.arf
[Sun Mar 25 12:59:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:14 2012] Updating source flux to 1.1e-13
[Sun Mar 25 13:06:37 2012] Flag c found in src. 56 procflags, skipping spectral fitting