[Sat Mar 24 05:46:47 2012] Detection parameters:
  Position = (157.9, 273.9) = 3 34 18.53 -36 9 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.2 +/- 29.7
  Background counts = 304.9
  Rate = 0.002 +/- 0.0002

[Sat Mar 24 05:46:49 2012] Off-axis axis estimate = 10.34'
[Sat Mar 24 06:00:44 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 06:00:44 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Sat Mar 24 06:00:44 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.897
[Sat Mar 24 06:00:44 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 11.60"
[Sat Mar 24 10:40:58 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src42.ximg exists
[Sat Mar 24 10:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src42.csv
[Sat Mar 24 10:40:58 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Mar 24 10:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src42.csv
[Sat Mar 24 10:40:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 10:40:59 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Mar 24 10:40:59 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Mar 24 10:40:59 2012] Fit fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sat Mar 24 15:14:26 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 11.049812 pixels away
[Sat Mar 24 15:14:26 2012] Source 42 is offset by 7.380861 and -4.638389 pixels which is larger than
2 X fitted extent = 1.384703 x 1.384703, not incorporating fit results
[Sat Mar 24 15:14:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:26 2012] Assessing source extent using major
[Sat Mar 24 15:14:26 2012] Source does appear to be extended
[Sat Mar 24 15:14:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 15:15:23 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 15:15:23 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Sat Mar 24 15:15:23 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.897
[Sat Mar 24 15:15:23 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.60"
[Sat Mar 24 20:27:05 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src39.ximg exists
[Sat Mar 24 20:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src39.csv
[Sat Mar 24 20:27:05 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Mar 24 20:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src39.csv
[Sat Mar 24 20:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Mar 24 20:27:07 2012] Fit fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sun Mar 25 00:21:42 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 14.549871 pixels away
[Sun Mar 25 00:21:42 2012] Source 42 is offset by 0.320287 and -4.693355 pixels which is larger than
2 X fitted extent = 1.384703 x 1.384703, not incorporating fit results
[Sun Mar 25 00:21:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:42 2012] Assessing source extent using major
[Sun Mar 25 00:21:42 2012] Source does appear to be extended
[Sun Mar 25 00:21:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 00:22:34 2012] XMMSAS src. selection expression = ellipse(13688.618927, 23779.432129, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 00:22:34 2012] Writing source region out to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src42_src.reg
[Sun Mar 25 00:22:34 2012] Extracting stamp from image fullrun_pn_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (120, 236) - (195, 311)
[Sun Mar 25 00:22:34 2012] XMMSAS bgd. selection expression = annulus(13688.618927, 23779.432129, 1087.500000, 2175.000000, X, Y) && !ellipse(12709.997696, 23188.762451, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 00:22:34 2012] Writing fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src42.gif
[Sun Mar 25 01:48:48 2012] Mean detx,y = (6467.06, -8407.20) 
[Sun Mar 25 01:48:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 01:49:27 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 01:49:27 2012] Setting source spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Mar 25 01:49:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun Mar 25 06:41:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 06:41:10 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:08 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:08 2012] Error reading totcts from fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Mar 25 12:59:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:13 2012] Using photon index=1.80, rate=0.00179, arf fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src42.arf
[Sun Mar 25 12:59:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:13 2012] Updating source flux to 8.3e-15
[Sun Mar 25 13:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting