[Sat Mar 24 05:46:44 2012] Detection parameters:
  Position = (189.1, 352.7) = 3 34 7.27 -36 4 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2363.1 +/- 61.9
  Background counts = 339.0
  Rate = 0.04 +/- 0.0009

[Sat Mar 24 05:46:49 2012] Off-axis axis estimate = 8.85'
[Sat Mar 24 06:00:44 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 06:00:44 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Sat Mar 24 06:00:44 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.975
[Sat Mar 24 06:00:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.85"
[Sat Mar 24 10:40:57 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src3.ximg exists
[Sat Mar 24 10:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src3.csv
[Sat Mar 24 10:40:57 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Mar 24 10:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src3.csv
[Sat Mar 24 10:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 10:40:58 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Mar 24 10:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Mar 24 10:40:58 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Mar 24 10:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Mar 24 10:40:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:14:26 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.173750 pixels away
[Sat Mar 24 15:14:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:26 2012] Assessing source extent using major
[Sat Mar 24 15:14:26 2012] Source does appear to be extended
[Sat Mar 24 15:14:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 15:15:23 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 15:15:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 15:15:23 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Sat Mar 24 15:15:23 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.975
[Sat Mar 24 15:15:23 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.85"
[Sat Mar 24 20:27:04 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src2.ximg exists
[Sat Mar 24 20:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src2.csv
[Sat Mar 24 20:27:04 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Mar 24 20:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src2.csv
[Sat Mar 24 20:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:27:06 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Mar 24 20:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Mar 24 20:27:06 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Mar 24 20:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Mar 24 20:27:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:21:41 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.731901 pixels away
[Sun Mar 25 00:21:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:42 2012] Assessing source extent using major
[Sun Mar 25 00:21:42 2012] Source does appear to be extended
[Sun Mar 25 00:21:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 00:22:33 2012] Counts = 2363.144775, rescaling region sizes by 2.000000
[Sun Mar 25 00:22:33 2012] XMMSAS src. selection expression = ellipse(16403.609406, 30636.950653, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar 25 00:22:33 2012] Writing source region out to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar 25 00:22:33 2012] Extracting stamp from image fullrun_pn_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (114, 278) - (264, 428)
[Sun Mar 25 00:22:33 2012] XMMSAS bgd. selection expression = annulus(16403.609406, 30636.950653, 4350.000000, 8700.000000, X, Y) && !ellipse(23932.892822, 25348.535858, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21990.693756, 37107.020752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23576.871979, 35332.433685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13690.928802, 27975.528046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.406600, 27423.829680, 368.719211, 368.719211, 0.000000, X, Y) && !ellipse(25197.488000, 27015.444000, 1358.288039, 1358.288039, 0.000000, X, Y) && !ellipse(22051.491272, 26677.847961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23003.613983, 26538.743011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18663.084900, 26788.755800, 402.950412, 402.950412, 0.000000, X, Y) && !ellipse(22595.140381, 26391.521637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25141.253200, 25697.864800, 383.460811, 383.460811, 0.000000, X, Y) && !ellipse(25722.499390, 25194.334412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22487.009003, 25107.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.609436, 24589.144379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.853027, 24601.702667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.997345, 24093.280487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.380000, 24089.846000, 501.767214, 207.552806, 44.136000, X, Y) && !ellipse(13688.618927, 23779.432129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23922.195709, 23616.734589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23018.026000, 23351.822400, 1271.744037, 1271.744037, 0.000000, X, Y) && !ellipse(22544.893951, 23708.558777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21969.083145, 23488.263031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20739.070465, 23124.152313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12709.997696, 23188.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23740.798798, 22944.109467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23107.139100, 22752.857600, 375.069611, 375.069611, 0.000000, X, Y)
[Sun Mar 25 00:22:33 2012] Writing fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src3.gif
[Sun Mar 25 00:43:30 2012] Mean detx,y = (9179.85, -1566.75) 
[Sun Mar 25 00:43:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 00:47:41 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 00:47:42 2012] Setting source spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 25 00:47:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar 25 05:19:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 05:19:20 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:05 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:05 2012] Error reading totcts from fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 25 12:59:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:10 2012] Using photon index=1.80, rate=0.0355, arf fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src3.arf
[Sun Mar 25 12:59:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:11 2012] Updating source flux to 1.4e-13
[Sun Mar 25 13:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 25 13:09:41 2012] xmm0505140501/analysis//spectral/fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete