[Sat Mar 24 05:46:46 2012] Detection parameters:
  Position = (368.2, 293.5) = 3 33 3.01 -36 8 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.5 +/- 28.9
  Background counts = 336.6
  Rate = 0.003 +/- 0.0004

[Sat Mar 24 05:46:49 2012] Off-axis axis estimate = 5.07'
[Sat Mar 24 06:00:44 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 06:00:44 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Sat Mar 24 06:00:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Sat Mar 24 06:00:44 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.96"
[Sat Mar 24 10:40:57 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src29.ximg exists
[Sat Mar 24 10:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src29.csv
[Sat Mar 24 10:40:57 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Mar 24 10:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src29.csv
[Sat Mar 24 10:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 10:40:59 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Mar 24 10:40:59 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Mar 24 10:40:59 2012] Fit fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Mar 24 15:14:26 2012] Spatial fit model total counts = 998.041000, observed total counts = 992.000000
[Sat Mar 24 15:14:26 2012] Offset between fit and detection position for source 29 = 0.077139 pixels
[Sat Mar 24 15:14:26 2012] 994.148900 total counts/ 918.582000 bgd. counts: snr = 2.493289
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.077139 pixels
  Position = (368.2, 293.4) = 3 33 2.99 -36 8 21.3
  Extent = 5.4 (3.1-8.1)", rotation angle = 0
  Source counts = 75.6 +/- 31.5
  Background counts = 918.6
  Rate = 0.001 +/- 0.0006
[Sat Mar 24 15:14:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:26 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 15:14:26 2012] Source does appear to be extended
[Sat Mar 24 15:14:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 15:15:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 24 15:15:23 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Sat Mar 24 15:15:23 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.997
[Sat Mar 24 15:15:23 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 5.37"
[Sat Mar 24 20:27:05 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src27.ximg exists
[Sat Mar 24 20:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src27.csv
[Sat Mar 24 20:27:05 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Mar 24 20:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src27.csv
[Sat Mar 24 20:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Mar 24 20:27:07 2012] Fit fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Mar 25 00:21:42 2012] Warning, spatial fit 27 centroid is now closest to src. 24
[Sun Mar 25 00:21:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:42 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 00:21:42 2012] Source does appear to be extended
[Sun Mar 25 00:21:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 00:22:34 2012] XMMSAS src. selection expression = ellipse(31985.874320, 25477.316400, 322.324809, 322.324809, 0.000000, X, Y)
[Sun Mar 25 00:22:34 2012] Writing source region out to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src29_src.reg
[Sun Mar 25 00:22:34 2012] Extracting stamp from image fullrun_pn_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (350, 275) - (387, 312)
[Sun Mar 25 00:22:34 2012] XMMSAS bgd. selection expression = annulus(31985.874320, 25477.316400, 537.208015, 1074.416031, X, Y) && !ellipse(32797.328000, 26906.546000, 393.652811, 393.652811, 0.000000, X, Y) && !ellipse(32390.066498, 26526.065247, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 00:22:34 2012] Writing fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src29.gif
[Sun Mar 25 01:29:36 2012] Mean detx,y = (-5813.79, 5275.11) 
[Sun Mar 25 01:29:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 01:30:08 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 01:30:09 2012] Setting source spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Mar 25 01:30:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Mar 25 06:16:35 2012] Not generating rmf since there are only 75 counts
[Sun Mar 25 06:16:35 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:06 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:07 2012] Error reading totcts from fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Mar 25 12:59:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:12 2012] Using photon index=1.80, rate=0.00132, arf fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src29.arf
[Sun Mar 25 12:59:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:12 2012] Updating source flux to 6.3e-15
[Sun Mar 25 13:06:37 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting