[Sat Mar 24 05:46:46 2012] Detection parameters:
  Position = (260.3, 303.9) = 3 33 41.75 -36 7 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 964.9 +/- 49.9
  Background counts = 393.6
  Rate = 0.009 +/- 0.0005

[Sat Mar 24 05:46:49 2012] Off-axis axis estimate = 2.80'
[Sat Mar 24 06:00:44 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 06:00:44 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sat Mar 24 06:00:44 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.946
[Sat Mar 24 06:00:44 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.83"
[Sat Mar 24 10:40:57 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src26.ximg exists
[Sat Mar 24 10:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src26.csv
[Sat Mar 24 10:40:57 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Mar 24 10:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src26.csv
[Sat Mar 24 10:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 10:40:59 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Mar 24 10:40:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Mar 24 10:40:59 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Mar 24 10:40:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Mar 24 10:40:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:14:26 2012] Spatial fit model total counts = 2007.410000, observed total counts = 1759.000000
[Sat Mar 24 15:14:26 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 24 15:14:26 2012] Warning, spatial fit 26 centroid is now closest to src. 23
[Sat Mar 24 15:14:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:26 2012] Assessing source extent using major
[Sat Mar 24 15:14:26 2012] Source does appear to be extended
[Sat Mar 24 15:14:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 15:14:26 2012] Source is confused with source 21
[Sat Mar 24 15:15:23 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 15:15:23 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sat Mar 24 15:15:23 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.946
[Sat Mar 24 15:15:23 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.83"
[Sat Mar 24 20:27:04 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src24.ximg exists
[Sat Mar 24 20:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src24.csv
[Sat Mar 24 20:27:04 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Mar 24 20:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src24.csv
[Sat Mar 24 20:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Mar 24 20:27:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Mar 24 20:27:07 2012] fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Mar 24 20:27:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Mar 24 20:27:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:21:42 2012] Warning, spatial fit 24 centroid is now closest to src. 23
[Sun Mar 25 00:21:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:42 2012] Assessing source extent using major
[Sun Mar 25 00:21:42 2012] Source does appear to be extended
[Sun Mar 25 00:21:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 00:22:34 2012] XMMSAS src. selection expression = ellipse(22595.140381, 26391.521637, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 00:22:34 2012] Writing source region out to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src26_src.reg
[Sun Mar 25 00:22:34 2012] Extracting stamp from image fullrun_pn_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (223, 266) - (298, 341)
[Sun Mar 25 00:22:34 2012] XMMSAS bgd. selection expression = annulus(22595.140381, 26391.521637, 1087.500000, 2175.000000, X, Y) && !ellipse(23932.892822, 25348.535858, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24942.406600, 27423.829680, 368.719211, 368.719211, 0.000000, X, Y) && !ellipse(25197.488000, 27015.444000, 1358.288039, 1358.288039, 0.000000, X, Y) && !ellipse(22051.491272, 26677.847961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23003.613983, 26538.743011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25141.253200, 25697.864800, 383.460811, 383.460811, 0.000000, X, Y) && !ellipse(22487.009003, 25107.886658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.609436, 24589.144379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.853027, 24601.702667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.997345, 24093.280487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.380000, 24089.846000, 501.767214, 207.552806, 44.136000, X, Y) && !ellipse(23922.195709, 23616.734589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23018.026000, 23351.822400, 1271.744037, 1271.744037, 0.000000, X, Y) && !ellipse(22544.893951, 23708.558777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21969.083145, 23488.263031, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 00:22:34 2012] Writing fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src26.gif
[Sun Mar 25 01:24:59 2012] Mean detx,y = (1649.34, -401.86) 
[Sun Mar 25 01:25:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 01:26:02 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 01:26:02 2012] Setting source spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Mar 25 01:26:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Mar 25 06:12:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 06:12:55 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:06 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:06 2012] Error reading totcts from fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Mar 25 12:59:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:12 2012] Using photon index=1.80, rate=0.00935, arf fullrun_pn_xmm0505140501_pi300-10000_pass1_cl_src26.arf
[Sun Mar 25 12:59:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:12 2012] Updating source flux to 2.4e-14
[Sun Mar 25 13:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting