[Sat Mar 24 05:48:46 2012] Detection parameters:
  Position = (275.7, 292.7) = 3 33 36.21 -36 8 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14498.8 +/- 146.8
  Background counts = 229.1
  Rate = 0.1 +/- 0.001

[Sat Mar 24 05:48:50 2012] Off-axis axis estimate = 1.70'
[Sat Mar 24 12:32:52 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 12:32:52 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Mar 24 12:32:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.688
[Sat Mar 24 12:32:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Mar 24 15:13:57 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 24 15:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 15:13:57 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 24 15:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 15:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:13:58 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 24 15:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Mar 24 15:13:58 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 24 15:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Mar 24 15:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:14:54 2012] Spatial fit model total counts = 15651.000000, observed total counts = 13895.000000
[Sat Mar 24 15:14:54 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 24 15:14:55 2012] Spatial fit model total counts = 3073.930000, observed total counts = 2707.000000
[Sat Mar 24 15:14:55 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 24 15:14:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:55 2012] Assessing source extent using major
[Sat Mar 24 15:14:55 2012] Source does appear to be extended
[Sat Mar 24 15:14:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 15:14:55 2012] Source is confused with source 4
[Sat Mar 24 22:02:48 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 22:02:48 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Mar 24 22:02:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.688
[Sat Mar 24 22:02:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sun Mar 25 00:21:13 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 00:21:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 00:21:13 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 00:21:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 00:21:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:21:14 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 00:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 25 00:21:14 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 00:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 25 00:21:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:22:07 2012] Spatial fit model total counts = 15657.500000, observed total counts = 13895.000000
[Sun Mar 25 00:22:07 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 00:22:07 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:22:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:22:07 2012] Assessing source extent using major
[Sun Mar 25 00:22:07 2012] Source does appear to be extended
[Sun Mar 25 00:22:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 09:50:51 2012] Counts = 14498.799805, rescaling region sizes by 3.000000
[Sun Mar 25 09:50:51 2012] XMMSAS src. selection expression = ellipse(23937.239105, 25414.725739, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Mar 25 09:50:51 2012] Writing source region out to fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src5_src.reg
[Sun Mar 25 09:50:51 2012] Extracting stamp from image fullrun_mos2_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (163, 180) - (388, 405)
[Sun Mar 25 09:50:51 2012] XMMSAS bgd. selection expression = annulus(23937.239105, 25414.725739, 9787.500000, 19575.000000, X, Y) && !ellipse(29795.037040, 11725.844200, 443.237613, 443.237613, 0.000000, X, Y) && !ellipse(24789.997345, 27221.818329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16398.197128, 30649.123962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.796000, 23933.186200, 336.000010, 336.000010, 0.000000, X, Y) && !ellipse(24127.503815, 25155.005463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29963.398926, 21503.089661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.550934, 25597.022705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23482.461792, 35446.629150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24494.955400, 22221.184380, 358.914410, 358.914410, 0.000000, X, Y) && !ellipse(18653.136463, 26806.584988, 384.039695, 281.811849, 88.608267, X, Y) && !ellipse(27160.856000, 26004.836000, 307.804009, 307.804009, 0.000000, X, Y) && !ellipse(22363.260400, 18611.946200, 336.682410, 336.682410, 0.000000, X, Y) && !ellipse(22607.764600, 26373.790000, 540.560816, 343.331210, 87.553000, X, Y) && !ellipse(26318.351685, 39119.917938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28846.207733, 13685.521835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.824800, 25707.171000, 331.138410, 331.138410, 0.000000, X, Y) && !ellipse(21985.013416, 23494.920949, 527.174415, 262.370034, 91.816339, X, Y) && !ellipse(25312.475250, 26464.176514, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(9582.564346, 30757.470398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23083.517000, 22764.391200, 351.921610, 351.921610, 0.000000, X, Y) && !ellipse(23658.997345, 26345.385193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23028.937653, 26538.158905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13654.913330, 27911.109070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33041.493866, 32985.961273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.613200, 13025.912000, 292.700808, 292.700808, 0.000000, X, Y) && !ellipse(26382.823780, 24909.178200, 387.558411, 387.558411, 0.000000, X, Y) && !ellipse(38296.984000, 33168.492600, 406.243905, 406.243905, 0.000000, X, Y) && !ellipse(16365.086258, 21932.211426, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(32669.917206, 19898.189499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23958.957245, 26708.192291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13709.978638, 23815.673279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32005.446400, 25414.860000, 353.716810, 353.716810, 0.000000, X, Y) && !ellipse(13935.541962, 29682.106537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32629.818298, 26977.574219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27157.255400, 21020.535000, 428.052812, 428.052812, 0.000000, X, Y) && !ellipse(13665.943400, 16196.128600, 477.264014, 477.264014, 0.000000, X, Y) && !ellipse(28020.350000, 25045.884000, 1145.112033, 1145.112033, 0.000000, X, Y) && !ellipse(35255.809540, 30622.350647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38057.292908, 25781.151642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25401.394000, 24253.270000, 1135.792033, 1135.792033, 0.000000, X, Y) && !ellipse(25296.162750, 22111.919739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21895.184387, 37182.590851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.109711, 23389.623383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22272.442810, 25625.556305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31300.567261, 41299.973114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39680.312317, 23602.519562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16946.341202, 40725.817719, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 09:50:51 2012] Writing fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src5.gif
[Sun Mar 25 09:51:28 2012] Mean detx,y = (141.93, 137.56) 
[Sun Mar 25 09:51:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 10:07:41 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 10:07:41 2012] Setting source spectrum file to fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 25 10:07:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Mar 25 10:57:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 10:57:58 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:22 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:22 2012] Error reading totcts from fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 25 12:59:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:26 2012] Using photon index=1.80, rate=0.131, arf fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src5.arf
[Sun Mar 25 12:59:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:26 2012] Updating source flux to 1.2e-12
[Sun Mar 25 13:03:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 25 13:06:37 2012] xmm0505140501/analysis//spectral/fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete