[Sat Mar 24 05:48:48 2012] Detection parameters:
  Position = (275.9, 307.5) = 3 33 36.12 -36 7 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.4 +/- 23.7
  Background counts = 231.7
  Rate = 0.002 +/- 0.0003

[Sat Mar 24 05:48:50 2012] Off-axis axis estimate = 1.76'
[Sat Mar 24 12:32:52 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 12:32:52 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Mar 24 12:32:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.736
[Sat Mar 24 12:32:52 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.31"
[Sat Mar 24 15:13:58 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src27.ximg exists
[Sat Mar 24 15:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src27.csv
[Sat Mar 24 15:13:58 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Mar 24 15:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src27.csv
[Sat Mar 24 15:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:13:58 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Mar 24 15:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Mar 24 15:13:58 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Mar 24 15:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Mar 24 15:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:14:55 2012] Warning, spatial fit 27 centroid is now closest to src. 3
[Sat Mar 24 15:14:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:55 2012] Assessing source extent using major
[Sat Mar 24 15:14:55 2012] Source does appear to be extended
[Sat Mar 24 15:14:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 15:14:55 2012] Source is confused with source 33
[Sat Mar 24 22:02:49 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 22:02:49 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Mar 24 22:02:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.736
[Sat Mar 24 22:02:49 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 7.31"
[Sun Mar 25 00:21:14 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src26.ximg exists
[Sun Mar 25 00:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src26.csv
[Sun Mar 25 00:21:14 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Mar 25 00:21:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src26.csv
[Sun Mar 25 00:21:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:21:15 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Mar 25 00:21:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Mar 25 00:21:15 2012] fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Mar 25 00:21:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Mar 25 00:21:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:22:07 2012] Source 31 is offset by -2.694147 and -3.128571 pixels which is larger than
2 X fitted extent = 0.848929 x 0.848929, not incorporating fit results
[Sun Mar 25 00:22:07 2012] Source 31 is offset by 4.706704 and -3.220916 pixels which is larger than
2 X fitted extent = 0.886575 x 0.886575, not incorporating fit results
[Sun Mar 25 00:22:07 2012] Source 31 is offset by -5.772376 and 6.268348 pixels which is larger than
2 X fitted extent = 0.840018 x 0.840018, not incorporating fit results
[Sun Mar 25 00:22:07 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:22:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:22:07 2012] Assessing source extent using major
[Sun Mar 25 00:22:07 2012] Source does appear to be extended
[Sun Mar 25 00:22:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 09:50:52 2012] XMMSAS src. selection expression = ellipse(23958.957245, 26708.192291, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 09:50:52 2012] Writing source region out to fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src31_src.reg
[Sun Mar 25 09:50:52 2012] Extracting stamp from image fullrun_mos2_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (238, 270) - (313, 345)
[Sun Mar 25 09:50:52 2012] XMMSAS bgd. selection expression = annulus(23958.957245, 26708.192291, 1087.500000, 2175.000000, X, Y) && !ellipse(23937.239105, 25414.725739, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24789.997345, 27221.818329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24127.503815, 25155.005463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.550934, 25597.022705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22607.764600, 26373.790000, 540.560816, 343.331210, 87.553000, X, Y) && !ellipse(25128.824800, 25707.171000, 331.138410, 331.138410, 0.000000, X, Y) && !ellipse(25312.475250, 26464.176514, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23658.997345, 26345.385193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23028.937653, 26538.158905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26382.823780, 24909.178200, 387.558411, 387.558411, 0.000000, X, Y) && !ellipse(25401.394000, 24253.270000, 1135.792033, 1135.792033, 0.000000, X, Y) && !ellipse(22272.442810, 25625.556305, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 09:50:52 2012] Writing fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src31.gif
[Sun Mar 25 10:46:12 2012] Mean detx,y = (-767.22, -812.13) 
[Sun Mar 25 10:46:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 10:46:33 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 10:46:33 2012] Setting source spectrum file to fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Mar 25 10:46:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Mar 25 12:22:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 12:22:15 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:24 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:24 2012] Error reading totcts from fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Mar 25 12:59:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:27 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0505140501_pi300-10000_pass1_cl_src31.arf
[Sun Mar 25 12:59:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:27 2012] Updating source flux to 2.1e-14
[Sun Mar 25 13:03:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting