[Sat Mar 24 05:47:48 2012] Detection parameters:
  Position = (189.0, 352.7) = 3 34 7.30 -36 4 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1176.4 +/- 46.3
  Background counts = 236.0
  Rate = 0.01 +/- 0.0006

[Sat Mar 24 05:47:51 2012] Off-axis axis estimate = 8.85'
[Sat Mar 24 10:41:00 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 10:41:00 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Mar 24 10:41:00 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.975
[Sat Mar 24 10:41:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.86"
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src3.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src3.csv
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src3.csv
[Sat Mar 24 12:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Mar 24 12:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:14:39 2012] Warning, spatial fit 3 centroid is now closest to src. 38
[Sat Mar 24 15:14:40 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:40 2012] Assessing source extent using major
[Sat Mar 24 15:14:40 2012] Source does appear to be extended
[Sat Mar 24 15:14:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 20:27:08 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 20:27:08 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Mar 24 20:27:08 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.975
[Sat Mar 24 20:27:08 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.86"
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src3.ximg exists
[Sat Mar 24 22:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src3.csv
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Mar 24 22:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src3.csv
[Sat Mar 24 22:02:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Mar 24 22:02:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Mar 24 22:02:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Mar 24 22:02:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 00:21:53 2012] Warning, spatial fit 3 centroid is now closest to src. 38
[Sun Mar 25 00:21:53 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:53 2012] Assessing source extent using major
[Sun Mar 25 00:21:53 2012] Source does appear to be extended
[Sun Mar 25 00:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 07:16:02 2012] Counts = 1176.416382, rescaling region sizes by 2.000000
[Sun Mar 25 07:16:02 2012] XMMSAS src. selection expression = ellipse(16396.374451, 30634.967346, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar 25 07:16:02 2012] Writing source region out to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src8_src.reg
[Sun Mar 25 07:16:02 2012] Extracting stamp from image fullrun_mos1_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (114, 278) - (264, 428)
[Sun Mar 25 07:16:03 2012] XMMSAS bgd. selection expression = annulus(16396.374451, 30634.967346, 4350.000000, 8700.000000, X, Y) && !ellipse(23935.380000, 25349.507000, 1890.403254, 1890.403254, 0.000000, X, Y) && !ellipse(24366.696400, 23938.739600, 348.060810, 348.060810, 0.000000, X, Y) && !ellipse(18686.049200, 26817.437600, 224.660806, 224.660806, 0.000000, X, Y) && !ellipse(24945.912200, 27425.215400, 392.287211, 392.287211, 0.000000, X, Y) && !ellipse(24468.878560, 22217.853000, 359.941610, 359.941610, 0.000000, X, Y) && !ellipse(22675.545936, 26420.924371, 720.801621, 493.989377, 151.673555, X, Y) && !ellipse(23579.524353, 35369.758087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21977.757126, 37166.955383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.312000, 26104.696000, 1083.624031, 1083.624031, 0.000000, X, Y) && !ellipse(21971.428000, 23499.250000, 266.804008, 266.804008, 0.000000, X, Y) && !ellipse(9574.968971, 30728.060638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13666.084366, 27975.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22053.025879, 25259.475555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19099.970871, 31738.968353, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23114.460000, 22727.542000, 358.336810, 358.336810, 0.000000, X, Y) && !ellipse(21201.230087, 33957.149750, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20083.450806, 34322.829590, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23153.048000, 22902.835200, 1272.904037, 1272.904037, 0.000000, X, Y) && !ellipse(17939.429600, 32588.518000, 1043.368030, 1043.368030, 0.000000, X, Y) && !ellipse(14069.940872, 23851.598480, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20327.255508, 35929.440918, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22569.949463, 36167.018250, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(15174.418457, 33681.690460, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22408.340485, 23703.195618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18066.898972, 33126.600830, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Mar 25 07:16:03 2012] Writing fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src8.gif
[Sun Mar 25 07:27:00 2012] Mean detx,y = (1639.76, 8863.25) 
[Sun Mar 25 07:27:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 07:29:28 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 07:29:28 2012] Setting source spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Mar 25 07:29:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Mar 25 08:23:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 08:23:20 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:15 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:15 2012] Error reading totcts from fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Mar 25 12:59:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:19 2012] Using photon index=1.80, rate=0.0141, arf fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src8.arf
[Sun Mar 25 12:59:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:19 2012] Updating source flux to 1.8e-13
[Sun Mar 25 12:59:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting