[Sat Mar 24 05:47:50 2012] Detection parameters:
  Position = (234.2, 413.5) = 3 33 51.07 -35 59 39.6
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 188.8 +/- 20.7
  Background counts = 605.7
  Rate = 0.002 +/- 0.0002

[Sat Mar 24 05:47:51 2012] Off-axis axis estimate = 9.56'
[Sat Mar 24 10:41:00 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 10:41:00 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Mar 24 10:41:00 2012] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.872
[Sat Mar 24 10:41:00 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 11.21"
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src31.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src31.csv
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src31.csv
[Sat Mar 24 12:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:32:52 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Mar 24 12:32:52 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Mar 24 12:32:52 2012] Fit fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Mar 24 15:14:40 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 10.771883 pixels away
[Sat Mar 24 15:14:40 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:40 2012] Assessing source extent using major
[Sat Mar 24 15:14:40 2012] Source does appear to be extended
[Sat Mar 24 15:14:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 20:27:08 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 20:27:08 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Mar 24 20:27:08 2012] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.872
[Sat Mar 24 20:27:08 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 11.21"
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src30.ximg exists
[Sat Mar 24 22:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src30.csv
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Mar 24 22:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src30.csv
[Sat Mar 24 22:02:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Mar 24 22:02:48 2012] Fit fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Mar 25 00:21:53 2012] Warning, spatial fit 30 centroid is now closest to src. 35
[Sun Mar 25 00:21:53 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:53 2012] Assessing source extent using major
[Sun Mar 25 00:21:53 2012] Source does appear to be extended
[Sun Mar 25 00:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 07:16:03 2012] XMMSAS src. selection expression = ellipse(20327.255508, 35929.440918, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar 25 07:16:03 2012] Writing source region out to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src33_src.reg
[Sun Mar 25 07:16:03 2012] Extracting stamp from image fullrun_mos1_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (159, 339) - (309, 489)
[Sun Mar 25 07:16:03 2012] XMMSAS bgd. selection expression = annulus(20327.255508, 35929.440918, 2175.000000, 4350.000000, X, Y) && !ellipse(23579.524353, 35369.758087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21977.757126, 37166.955383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19099.970871, 31738.968353, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(21201.230087, 33957.149750, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20083.450806, 34322.829590, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(17939.429600, 32588.518000, 1043.368030, 1043.368030, 0.000000, X, Y) && !ellipse(22569.949463, 36167.018250, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(15174.418457, 33681.690460, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18066.898972, 33126.600830, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Mar 25 07:16:03 2012] Writing fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src33.gif
[Sun Mar 25 07:51:49 2012] Mean detx,y = (-4918.17, 9552.20) 
[Sun Mar 25 07:51:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 07:52:45 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 07:52:46 2012] Setting source spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Mar 25 07:52:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Mar 25 09:48:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 09:48:03 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:18 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:18 2012] Error reading totcts from fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Mar 25 12:59:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:21 2012] Using photon index=1.80, rate=0.00153, arf fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src33.arf
[Sun Mar 25 12:59:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:21 2012] Updating source flux to 2.7e-14
[Sun Mar 25 12:59:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting