[Sat Mar 24 05:47:48 2012] Detection parameters:
  Position = (342.9, 135.3) = 3 33 12.04 -36 19 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9064.3 +/- 115.0
  Background counts = 182.4
  Rate = 0.07 +/- 0.0009

[Sat Mar 24 05:47:51 2012] Off-axis axis estimate = 12.26'
[Sat Mar 24 10:41:00 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 10:41:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 10:41:00 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Mar 24 10:41:00 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Sat Mar 24 10:41:00 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.56"
[Sat Mar 24 12:32:50 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src2.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src2.csv
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src2.csv
[Sat Mar 24 12:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Mar 24 12:32:51 2012] Fit fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Mar 24 15:14:39 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.196432 pixels away
[Sat Mar 24 15:14:40 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:40 2012] Assessing source extent using major
[Sat Mar 24 15:14:40 2012] Source does appear to be extended
[Sat Mar 24 15:14:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 20:27:08 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 20:27:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 20:27:08 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Mar 24 20:27:08 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Sat Mar 24 20:27:08 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.56"
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src2.ximg exists
[Sat Mar 24 22:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src2.csv
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Mar 24 22:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src2.csv
[Sat Mar 24 22:02:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Mar 24 22:02:48 2012] Fit fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Mar 25 00:21:53 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.196432 pixels away
[Sun Mar 25 00:21:53 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:53 2012] Assessing source extent using major
[Sun Mar 25 00:21:53 2012] Source does appear to be extended
[Sun Mar 25 00:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 07:16:02 2012] Counts = 9064.303711, rescaling region sizes by 2.000000
[Sun Mar 25 07:16:02 2012] XMMSAS src. selection expression = ellipse(29785.596924, 11720.853256, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar 25 07:16:02 2012] Writing source region out to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar 25 07:16:02 2012] Extracting stamp from image fullrun_mos1_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (268, 60) - (418, 210)
[Sun Mar 25 07:16:02 2012] XMMSAS bgd. selection expression = annulus(29785.596924, 11720.853256, 4350.000000, 8700.000000, X, Y) && !ellipse(28837.008032, 13679.221200, 334.216810, 334.216810, 0.000000, X, Y) && !ellipse(28898.363129, 12993.548187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22343.146240, 18630.647980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.029816, 21038.616180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33177.120728, 10909.318329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32767.184204, 19916.262283, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 07:16:02 2012] Writing fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src2.gif
[Sun Mar 25 07:22:21 2012] Mean detx,y = (6327.62, -13843.59) 
[Sun Mar 25 07:22:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 07:26:34 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 07:26:34 2012] Setting source spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 25 07:26:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar 25 07:58:55 2012] Warning, no bgd image found
[Sun Mar 25 08:23:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 08:23:00 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:15 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:15 2012] Error reading totcts from fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 25 12:59:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:18 2012] Using photon index=1.80, rate=0.0734, arf fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src2.arf
[Sun Mar 25 12:59:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:19 2012] Updating source flux to 1.9e-12
[Sun Mar 25 12:59:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting