[Sat Mar 24 05:47:48 2012] Detection parameters:
  Position = (157.6, 322.1) = 3 34 18.59 -36 6 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.5 +/- 25.6
  Background counts = 225.0
  Rate = 0.002 +/- 0.0003

[Sat Mar 24 05:47:51 2012] Off-axis axis estimate = 10.35'
[Sat Mar 24 10:41:00 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 10:41:00 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Sat Mar 24 10:41:00 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.046
[Sat Mar 24 10:41:00 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.60"
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src21.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src21.csv
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Mar 24 12:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src21.csv
[Sat Mar 24 12:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Mar 24 12:32:51 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Mar 24 12:32:51 2012] Fit fullrun_mos1_xmm0505140501_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Mar 24 15:14:40 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.014633 pixels away
[Sat Mar 24 15:14:40 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:14:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:14:40 2012] Assessing source extent using major
[Sat Mar 24 15:14:40 2012] Source does appear to be extended
[Sat Mar 24 15:14:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 20:27:08 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 20:27:08 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Sat Mar 24 20:27:08 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.046
[Sat Mar 24 20:27:08 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.60"
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src20.ximg exists
[Sat Mar 24 22:02:47 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Mar 24 22:02:47 2012] Fit fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_src20 appears to have run properly
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Mar 24 22:02:48 2012] fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Mar 24 22:02:48 2012] Fit fullrun_mos1_xmm0505140501_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Mar 25 00:21:53 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.014633 pixels away
[Sun Mar 25 00:21:53 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 00:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 00:21:53 2012] Assessing source extent using major
[Sun Mar 25 00:21:53 2012] Source does appear to be extended
[Sun Mar 25 00:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 07:16:03 2012] XMMSAS src. selection expression = ellipse(13666.084366, 27975.597076, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 07:16:03 2012] Writing source region out to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src13_src.reg
[Sun Mar 25 07:16:03 2012] Extracting stamp from image fullrun_mos1_xmm0505140501_pi300-10000_cl_sm2.00.img.gz, (120, 285) - (195, 360)
[Sun Mar 25 07:16:03 2012] XMMSAS bgd. selection expression = annulus(13666.084366, 27975.597076, 1087.500000, 2175.000000, X, Y) && !ellipse(16396.374451, 30634.967346, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 07:16:03 2012] Writing fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src13.gif
[Sun Mar 25 07:41:29 2012] Mean detx,y = (5456.82, 8993.02) 
[Sun Mar 25 07:41:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 07:41:53 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 07:41:54 2012] Setting source spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Mar 25 07:41:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Mar 25 09:26:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 09:26:01 2012] rmf not generated due to insufficient counts
[Sun Mar 25 12:59:17 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:59:17 2012] Error reading totcts from fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Mar 25 12:59:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:59:20 2012] Using photon index=1.80, rate=0.00235, arf fullrun_mos1_xmm0505140501_pi300-10000_pass1_cl_src13.arf
[Sun Mar 25 12:59:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 12:59:20 2012] Updating source flux to 3.7e-14
[Sun Mar 25 12:59:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting