[Thu Mar  8 22:49:22 2012] Detection parameters:
  Position = (280.6, 278.6) = 3 33 34.43 -36 9 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2082.8 +/- 63.4
  Background counts = 319.9
  Rate = 0.03 +/- 0.0009

[Thu Mar  8 22:49:26 2012] Off-axis axis estimate = 1.93'
[Thu Mar  8 22:59:30 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 22:59:30 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Thu Mar  8 22:59:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.516
[Thu Mar  8 22:59:30 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.40"
[Fri Mar  9 03:28:37 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src7.ximg exists
[Fri Mar  9 03:28:37 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Mar  9 03:28:37 2012] Fit fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src7 appears to have run properly
[Fri Mar  9 03:28:38 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Mar  9 03:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Mar  9 03:28:38 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Mar  9 03:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Mar  9 03:28:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 07:57:01 2012] Warning, spatial fit 7 centroid is now closest to src. 67
[Fri Mar  9 07:57:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 07:57:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 07:57:01 2012] Assessing source extent using major
[Fri Mar  9 07:57:01 2012] Source does appear to be extended
[Fri Mar  9 07:57:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 07:57:37 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 07:57:37 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Mar  9 07:57:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.516
[Fri Mar  9 07:57:37 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.40"
[Fri Mar  9 16:23:36 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src7.ximg exists
[Fri Mar  9 16:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src7.csv
[Fri Mar  9 16:23:36 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Mar  9 16:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src7.csv
[Fri Mar  9 16:23:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 16:23:39 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Mar  9 16:23:39 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Mar  9 16:23:39 2012] Fit fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Mar  9 21:28:26 2012] Spatial fit model total counts = 5873.430000, observed total counts = 6251.000000
[Fri Mar  9 21:28:26 2012] Offset between fit and detection position for source 7 = 2.353712 pixels
[Fri Mar  9 21:28:26 2012] 3113.728000 total counts/ 701.708000 bgd. counts: snr = 91.054768
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.353712 pixels
  Position = (279.1, 280.4) = 3 33 34.98 -36 9 21.1
  Extent = 11.6 (11.6-11.6)", rotation angle = 0
  Source counts = 2412.0 +/- 55.8
  Background counts = 701.7
  Rate = 0.02 +/- 0.0005
[Fri Mar  9 21:28:27 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 21:28:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 21:28:27 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 21:28:27 2012] Source does appear to be extended
[Fri Mar  9 21:28:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 21:29:33 2012] Counts = 2412.020000, rescaling region sizes by 2.000000
[Fri Mar  9 21:29:33 2012] XMMSAS src. selection expression = ellipse(24234.983800, 24343.290400, 1396.932040, 1396.932040, 0.000000, X, Y)
[Fri Mar  9 21:29:33 2012] Writing source region out to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src7_src.reg
[Fri Mar  9 21:29:33 2012] Extracting stamp from image fullrun_pn_xmm0505140401_pi300-10000_cl_sm2.00.img.gz, (199, 200) - (359, 361)
[Fri Mar  9 21:29:33 2012] XMMSAS bgd. selection expression = annulus(24234.983800, 24343.290400, 4656.440134, 9312.880268, X, Y) && !ellipse(23902.241600, 25388.893400, 1994.481657, 1915.029655, 107.471500, X, Y) && !ellipse(22433.281830, 25493.115479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29892.355652, 21531.286072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16381.653641, 30672.225372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18873.998672, 29025.740814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24913.222400, 27465.036400, 483.295214, 483.295214, 0.000000, X, Y) && !ellipse(18622.022692, 26821.410179, 499.737589, 404.759368, 73.814310, X, Y) && !ellipse(26844.118000, 26234.226000, 893.824026, 893.824026, 0.000000, X, Y) && !ellipse(25167.044000, 25701.576000, 1072.912031, 1072.912031, 0.000000, X, Y) && !ellipse(26388.575200, 25171.882000, 296.289609, 296.289609, 0.000000, X, Y) && !ellipse(19343.666620, 33901.332600, 614.451218, 614.451218, 0.000000, X, Y) && !ellipse(14926.098877, 33713.776489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32957.697600, 33002.062200, 413.608012, 290.311208, 62.813564, X, Y) && !ellipse(26314.001820, 31275.487200, 399.454411, 399.454411, 0.000000, X, Y) && !ellipse(14217.219330, 31057.215240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26669.418500, 28153.408200, 668.899219, 668.899219, 0.000000, X, Y) && !ellipse(25961.656000, 28573.750000, 1169.776034, 1169.776034, 0.000000, X, Y) && !ellipse(26801.936000, 28276.516000, 1353.368039, 1353.368039, 0.000000, X, Y) && !ellipse(33646.933472, 27259.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22038.279846, 26737.264862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19943.864000, 26366.400000, 1472.264042, 1472.264042, 0.000000, X, Y) && !ellipse(32766.889496, 26941.476440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22580.436829, 26405.378235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.200714, 26107.454742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.191437, 25585.359161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27599.034271, 25570.108673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25703.292908, 25285.152344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22262.619202, 25035.983154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24875.632660, 24674.349579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23120.087463, 24611.319183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23941.893372, 23604.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22503.945435, 23775.008850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23219.518311, 23510.201538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21962.130951, 23516.286865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23511.740000, 23086.900000, 1231.200035, 1231.200035, 0.000000, X, Y) && !ellipse(23078.278400, 22811.174200, 478.954414, 478.954414, 0.000000, X, Y) && !ellipse(25280.014862, 22148.508698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32693.398285, 19964.838699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.858185, 18554.295975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22329.557800, 18671.868637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14764.386353, 17286.190262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20278.600769, 16892.015320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15543.726395, 16208.957260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.267395, 14355.717606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19673.862091, 14210.782211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16589.434906, 31472.398102, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30862.991882, 21746.358047, 1740.000000, 1740.000000, 0.000000, X, Y)
[Fri Mar  9 21:29:33 2012] Writing fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src7.gif
[Fri Mar  9 22:07:23 2012] Mean detx,y = (-207.14, -424.53) 
[Fri Mar  9 22:07:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 22:11:33 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 22:11:35 2012] Setting source spectrum file to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Mar  9 22:11:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Mar 10 08:53:45 2012] Updating aperture counts using extracted products
[Sat Mar 10 08:53:45 2012] Error reading totcts from fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Mar 10 08:53:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 08:53:48 2012] Using photon index=1.80, rate=0.0206, arf fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src7.arf
[Sat Mar 10 08:53:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 08:53:48 2012] Updating source flux to 5.6e-14