[Thu Mar  8 22:49:23 2012] Detection parameters:
  Position = (294.2, 322.4) = 3 33 29.54 -36 6 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.6 +/- 27.5
  Background counts = 308.2
  Rate = 0.001 +/- 0.0003

[Thu Mar  8 22:49:26 2012] Off-axis axis estimate = 1.77'
[Thu Mar  8 22:59:30 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 22:59:30 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Mar  8 22:59:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Thu Mar  8 22:59:30 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 7.31"
[Fri Mar  9 03:28:37 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src42.ximg exists
[Fri Mar  9 03:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src42.csv
[Fri Mar  9 03:28:37 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Mar  9 03:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src42.csv
[Fri Mar  9 03:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 03:28:39 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Mar  9 03:28:39 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Mar  9 03:28:39 2012] Fit fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri Mar  9 07:57:01 2012] Spatial fit model total counts = 4275.160000, observed total counts = 4274.000000
[Fri Mar  9 07:57:01 2012] Offset between fit and detection position for source 44 = 8.090750 pixels
[Fri Mar  9 07:57:01 2012] 3872.229000 total counts/ 3170.310000 bgd. counts: snr = 12.466259
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 8.090750 pixels
  Position = (299.0, 329.0) = 3 33 27.85 -36 5 49.6
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 701.9 +/- 62.2
  Background counts = 3170.3
  Rate = 0.006 +/- 0.0005
[Fri Mar  9 07:57:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 07:57:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 07:57:01 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 07:57:01 2012] Source does appear to be extended
[Fri Mar  9 07:57:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 07:57:01 2012] Source is confused with source 43
[Fri Mar  9 07:57:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 07:57:37 2012] Initial guess for spatial extent in simple fitting = 14.62"
[Fri Mar  9 07:57:37 2012] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.073
[Fri Mar  9 07:57:37 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 14.62"
[Fri Mar  9 16:23:36 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src39.ximg exists
[Fri Mar  9 16:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src39.csv
[Fri Mar  9 16:23:36 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri Mar  9 16:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src39.csv
[Fri Mar  9 16:23:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 16:23:39 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri Mar  9 16:23:39 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Mar  9 16:23:39 2012] Fit fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Mar  9 21:28:27 2012] Warning, spatial fit 39 centroid is now closest to src. 59
[Fri Mar  9 21:28:27 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 21:28:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 21:28:27 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 21:28:27 2012] Source does appear to be extended
[Fri Mar  9 21:28:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 21:29:34 2012] XMMSAS src. selection expression = ellipse(25961.656000, 28573.750000, 877.332025, 877.332025, 0.000000, X, Y)
[Fri Mar  9 21:29:34 2012] Writing source region out to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src44_src.reg
[Fri Mar  9 21:29:34 2012] Extracting stamp from image fullrun_pn_xmm0505140401_pi300-10000_cl_sm2.00.img.gz, (249, 279) - (349, 379)
[Fri Mar  9 21:29:34 2012] XMMSAS bgd. selection expression = annulus(25961.656000, 28573.750000, 1462.220042, 2924.440084, X, Y) && !ellipse(23902.241600, 25388.893400, 1994.481657, 1915.029655, 107.471500, X, Y) && !ellipse(22433.281830, 25493.115479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24913.222400, 27465.036400, 483.295214, 483.295214, 0.000000, X, Y) && !ellipse(26844.118000, 26234.226000, 893.824026, 893.824026, 0.000000, X, Y) && !ellipse(25167.044000, 25701.576000, 1072.912031, 1072.912031, 0.000000, X, Y) && !ellipse(26314.001820, 31275.487200, 399.454411, 399.454411, 0.000000, X, Y) && !ellipse(26669.418500, 28153.408200, 668.899219, 668.899219, 0.000000, X, Y) && !ellipse(26801.936000, 28276.516000, 1353.368039, 1353.368039, 0.000000, X, Y) && !ellipse(22580.436829, 26405.378235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.200714, 26107.454742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.191437, 25585.359161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27599.034271, 25570.108673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25703.292908, 25285.152344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22262.619202, 25035.983154, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 21:29:34 2012] Writing fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src44.gif
[Fri Mar  9 23:10:44 2012] Mean detx,y = (746.42, 3374.35) 
[Fri Mar  9 23:10:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 23:11:20 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 23:11:20 2012] Setting source spectrum file to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Mar  9 23:11:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Mar 10 08:53:46 2012] Updating aperture counts using extracted products
[Sat Mar 10 08:53:46 2012] Error reading totcts from fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Mar 10 08:53:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 08:53:48 2012] Using photon index=1.80, rate=0.00599, arf fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src44.arf
[Sat Mar 10 08:53:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 08:53:48 2012] Updating source flux to 1.7e-14
[Sat Mar 10 08:58:35 2012] Flag c found in src. 44 procflags, skipping spectral fitting