[Thu Mar  8 22:49:22 2012] Detection parameters:
  Position = (344.1, 248.0) = 3 33 11.61 -36 11 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2639.7 +/- 68.4
  Background counts = 270.3
  Rate = 0.04 +/- 0.0009

[Thu Mar  8 22:49:26 2012] Off-axis axis estimate = 4.93'
[Thu Mar  8 22:59:30 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 22:59:30 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Thu Mar  8 22:59:30 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.158
[Thu Mar  8 22:59:30 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.89"
[Fri Mar  9 03:28:37 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src4.ximg exists
[Fri Mar  9 03:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src4.csv
[Fri Mar  9 03:28:37 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Mar  9 03:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src4.csv
[Fri Mar  9 03:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 03:28:38 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Mar  9 03:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Mar  9 03:28:38 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Mar  9 03:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Mar  9 03:28:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 07:57:01 2012] Warning, spatial fit 4 centroid is now closest to src. 116
[Fri Mar  9 07:57:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 07:57:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 07:57:01 2012] Assessing source extent using major
[Fri Mar  9 07:57:01 2012] Source does appear to be extended
[Fri Mar  9 07:57:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 07:57:01 2012] Source is confused with source 116
[Fri Mar  9 07:57:37 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 07:57:37 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Fri Mar  9 07:57:37 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.158
[Fri Mar  9 07:57:37 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.89"
[Fri Mar  9 16:23:36 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src4.ximg exists
[Fri Mar  9 16:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src4.csv
[Fri Mar  9 16:23:36 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Mar  9 16:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src4.csv
[Fri Mar  9 16:23:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 16:23:38 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Mar  9 16:23:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Mar  9 16:23:38 2012] fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Mar  9 16:23:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Mar  9 16:23:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 21:28:26 2012] Warning, spatial fit 4 centroid is now closest to src. 116
[Fri Mar  9 21:28:27 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 21:28:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 21:28:27 2012] Assessing source extent using major
[Fri Mar  9 21:28:27 2012] Source does appear to be extended
[Fri Mar  9 21:28:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 21:29:33 2012] Counts = 2639.731201, rescaling region sizes by 2.000000
[Fri Mar  9 21:29:33 2012] XMMSAS src. selection expression = ellipse(29892.355652, 21531.286072, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar  9 21:29:33 2012] Writing source region out to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar  9 21:29:33 2012] Extracting stamp from image fullrun_pn_xmm0505140401_pi300-10000_cl_sm2.00.img.gz, (269, 173) - (419, 323)
[Fri Mar  9 21:29:33 2012] XMMSAS bgd. selection expression = annulus(29892.355652, 21531.286072, 4350.000000, 8700.000000, X, Y) && !ellipse(29745.500600, 11777.986400, 2263.288865, 2263.288865, 0.000000, X, Y) && !ellipse(23902.241600, 25388.893400, 1994.481657, 1915.029655, 107.471500, X, Y) && !ellipse(22433.281830, 25493.115479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.843400, 13726.458000, 494.200814, 250.408807, 340.837400, X, Y) && !ellipse(24234.983800, 24343.290400, 931.288027, 931.288027, 0.000000, X, Y) && !ellipse(24913.222400, 27465.036400, 483.295214, 483.295214, 0.000000, X, Y) && !ellipse(26844.118000, 26234.226000, 893.824026, 893.824026, 0.000000, X, Y) && !ellipse(25167.044000, 25701.576000, 1072.912031, 1072.912031, 0.000000, X, Y) && !ellipse(26388.575200, 25171.882000, 296.289609, 296.289609, 0.000000, X, Y) && !ellipse(38445.739624, 21918.786270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.970093, 13029.133545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35226.606873, 30742.501343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26669.418500, 28153.408200, 668.899219, 668.899219, 0.000000, X, Y) && !ellipse(25961.656000, 28573.750000, 1169.776034, 1169.776034, 0.000000, X, Y) && !ellipse(34266.574000, 27359.719800, 395.883211, 395.883211, 0.000000, X, Y) && !ellipse(26801.936000, 28276.516000, 1353.368039, 1353.368039, 0.000000, X, Y) && !ellipse(33646.933472, 27259.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22038.279846, 26737.264862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19943.864000, 26366.400000, 1472.264042, 1472.264042, 0.000000, X, Y) && !ellipse(32766.889496, 26941.476440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22580.436829, 26405.378235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.200714, 26107.454742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38070.090149, 25856.087189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.191437, 25585.359161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27599.034271, 25570.108673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34929.798492, 25278.403259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38370.995239, 24761.261963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25703.292908, 25285.152344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22262.619202, 25035.983154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24875.632660, 24674.349579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23120.087463, 24611.319183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23941.893372, 23604.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22503.945435, 23775.008850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23219.518311, 23510.201538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21962.130951, 23516.286865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23511.740000, 23086.900000, 1231.200035, 1231.200035, 0.000000, X, Y) && !ellipse(23078.278400, 22811.174200, 478.954414, 478.954414, 0.000000, X, Y) && !ellipse(25280.014862, 22148.508698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36669.063049, 21869.777084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32693.398285, 19964.838699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.858185, 18554.295975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22329.557800, 18671.868637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35104.990601, 15433.444443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.267395, 14355.717606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31128.470917, 12667.129593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25297.005600, 12461.658000, 800.216023, 301.643209, 351.204772, X, Y) && !ellipse(31345.073517, 12105.666565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.254700, 12179.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30862.991882, 21746.358047, 1740.000000, 1740.000000, 0.000000, X, Y)
[Fri Mar  9 21:29:33 2012] Writing fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src4.gif
[Fri Mar  9 21:56:53 2012] Mean detx,y = (-6876.44, 1062.61) 
[Fri Mar  9 21:57:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 21:59:40 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 21:59:41 2012] Setting source spectrum file to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar  9 21:59:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Mar 10 01:42:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 01:42:43 2012] rmf not generated due to insufficient counts
[Sat Mar 10 08:53:45 2012] Updating aperture counts using extracted products
[Sat Mar 10 08:53:45 2012] Error reading totcts from fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Mar 10 08:53:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 08:53:48 2012] Using photon index=1.80, rate=0.0357, arf fullrun_pn_xmm0505140401_pi300-10000_pass1_cl_src4.arf
[Sat Mar 10 08:53:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 08:53:48 2012] Updating source flux to 1.3e-13
[Sat Mar 10 08:58:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting