[Thu Mar  8 22:50:48 2012] Detection parameters:
  Position = (273.1, 265.2) = 3 33 37.14 -36 10 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.5 +/- 20.6
  Background counts = 71.8
  Rate = 0.002 +/- 0.0002

[Thu Mar  8 22:50:48 2012] Off-axis axis estimate = 3.03'
[Fri Mar  9 05:29:10 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 05:29:10 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Fri Mar  9 05:29:10 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.740
[Fri Mar  9 05:29:10 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.94"
[Fri Mar  9 07:56:37 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src25.ximg exists
[Fri Mar  9 07:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src25.csv
[Fri Mar  9 07:56:37 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Mar  9 07:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src25.csv
[Fri Mar  9 07:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 07:56:38 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Mar  9 07:56:38 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Mar  9 07:56:38 2012] Fit fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Mar  9 07:57:17 2012] Source 47 is offset by -1.464119 and 1.456885 pixels which is larger than
2 X fitted extent = 0.928189 x 0.928189, not incorporating fit results
[Fri Mar  9 07:57:17 2012] Warning, spatial fit 25 centroid is now closest to src. 50
[Fri Mar  9 07:57:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 07:57:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 07:57:17 2012] Assessing source extent using major
[Fri Mar  9 07:57:17 2012] Source does appear to be extended
[Fri Mar  9 07:57:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 07:57:17 2012] Source is confused with source 45
[Fri Mar  9 18:50:04 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 18:50:04 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Fri Mar  9 18:50:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.740
[Fri Mar  9 18:50:04 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.94"
[Fri Mar  9 21:27:55 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src25.ximg exists
[Fri Mar  9 21:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src25.csv
[Fri Mar  9 21:27:55 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Mar  9 21:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src25.csv
[Fri Mar  9 21:27:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 21:27:56 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Mar  9 21:27:56 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Mar  9 21:27:56 2012] Fit fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Mar  9 21:28:58 2012] Source 47 is offset by -7.190188 and 5.503483 pixels which is larger than
2 X fitted extent = 0.912864 x 0.912864, not incorporating fit results
[Fri Mar  9 21:28:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 21:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 21:28:58 2012] Assessing source extent using major
[Fri Mar  9 21:28:58 2012] Source does appear to be extended
[Fri Mar  9 21:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 07:00:34 2012] XMMSAS src. selection expression = ellipse(23712.307678, 23028.019012, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 07:00:34 2012] Writing source region out to fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src47_src.reg
[Sat Mar 10 07:00:34 2012] Extracting stamp from image fullrun_mos2_xmm0505140401_pi300-10000_cl_sm2.00.img.gz, (236, 228) - (311, 303)
[Sat Mar 10 07:00:34 2012] XMMSAS bgd. selection expression = annulus(23712.307678, 23028.019012, 1087.500000, 2175.000000, X, Y) && !ellipse(23914.363200, 25388.670600, 1855.764053, 1855.764053, 0.000000, X, Y) && !ellipse(24341.857200, 23971.027200, 353.293610, 353.293610, 0.000000, X, Y) && !ellipse(24452.798325, 22260.273141, 378.313270, 329.173282, 72.564463, X, Y) && !ellipse(21954.724960, 23548.884000, 314.477609, 314.477609, 0.000000, X, Y) && !ellipse(23080.018300, 22792.375200, 399.432811, 399.432811, 0.000000, X, Y) && !ellipse(24872.778503, 24662.128479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25291.407000, 22210.869200, 411.697612, 411.697612, 0.000000, X, Y) && !ellipse(22317.496002, 25626.825409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.696838, 25061.113007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22631.804000, 23857.146000, 584.901617, 584.901617, 0.000000, X, Y) && !ellipse(23251.118469, 23432.053406, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 10 07:00:34 2012] Writing fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src47.gif
[Sat Mar 10 07:20:49 2012] Mean detx,y = (1600.38, 2017.78) 
[Sat Mar 10 07:20:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 07:21:00 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 07:21:00 2012] Setting source spectrum file to fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Mar 10 07:21:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sat Mar 10 08:38:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 08:38:22 2012] rmf not generated due to insufficient counts
[Sat Mar 10 08:53:52 2012] Updating aperture counts using extracted products
[Sat Mar 10 08:53:52 2012] Error reading totcts from fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Mar 10 08:53:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 08:53:53 2012] Using photon index=1.80, rate=0.00198, arf fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src47.arf
[Sat Mar 10 08:53:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 08:53:53 2012] Updating source flux to 2.2e-14
[Sat Mar 10 08:56:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting