[Thu Mar  8 22:50:47 2012] Detection parameters:
  Position = (457.2, 271.7) = 3 32 31.00 -36 9 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.6 +/- 16.3
  Background counts = 47.8
  Rate = 0.0008 +/- 0.0001

[Thu Mar  8 22:50:48 2012] Off-axis axis estimate = 11.67'
[Fri Mar  9 05:29:10 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 05:29:10 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Fri Mar  9 05:29:10 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.112
[Fri Mar  9 05:29:10 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 12.27"
[Fri Mar  9 07:56:37 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src57.ximg exists
[Fri Mar  9 07:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src57.csv
[Fri Mar  9 07:56:37 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Mar  9 07:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src57.csv
[Fri Mar  9 07:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 07:56:38 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Mar  9 07:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Mar  9 07:56:38 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Mar  9 07:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Mar  9 07:56:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 07:57:17 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.941346 pixels away
[Fri Mar  9 07:57:17 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 18.766183 pixels away
[Fri Mar  9 07:57:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 07:57:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 07:57:17 2012] Assessing source extent using major
[Fri Mar  9 07:57:17 2012] Source does appear to be extended
[Fri Mar  9 07:57:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 18:50:04 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 18:50:04 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Fri Mar  9 18:50:04 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.112
[Fri Mar  9 18:50:04 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 12.27"
[Fri Mar  9 21:27:55 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src55.ximg exists
[Fri Mar  9 21:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src55.csv
[Fri Mar  9 21:27:55 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Mar  9 21:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src55.csv
[Fri Mar  9 21:27:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 21:27:57 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Mar  9 21:27:57 2012] fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Mar  9 21:27:57 2012] Fit fullrun_mos2_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Fri Mar  9 21:28:58 2012] Spatial fit model total counts = 603.984000, observed total counts = 551.000000
[Fri Mar  9 21:28:58 2012] Offset between fit and detection position for source 43 = 0.543963 pixels
[Fri Mar  9 21:28:58 2012] 597.236000 total counts/ 484.741000 bgd. counts: snr = 5.109499
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.543963 pixels
  Position = (456.8, 271.3) = 3 32 31.14 -36 9 59.7
  Extent = 9.0 (6.5-14.0)", rotation angle = 0
  Source counts = 112.5 +/- 24.4
  Background counts = 484.7
  Rate = 0.0009 +/- 0.0002
[Fri Mar  9 21:28:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 21:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 21:28:58 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 21:28:58 2012] Source does appear to be extended
[Fri Mar  9 21:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 07:00:35 2012] XMMSAS src. selection expression = ellipse(39696.468000, 23554.102200, 539.651381, 539.651381, 0.000000, X, Y)
[Sat Mar 10 07:00:35 2012] Writing source region out to fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src43_src.reg
[Sat Mar 10 07:00:35 2012] Extracting stamp from image fullrun_mos2_xmm0505140401_pi300-10000_cl_sm2.00.img.gz, (426, 240) - (488, 302)
[Sat Mar 10 07:00:35 2012] XMMSAS bgd. selection expression = annulus(39696.468000, 23554.102200, 899.418968, 1798.837936, X, Y) && !ellipse(38342.421814, 21816.336655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38026.792000, 25793.174200, 515.753615, 515.753615, 0.000000, X, Y)
[Sat Mar 10 07:00:35 2012] Writing fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src43.gif
[Sat Mar 10 07:29:37 2012] Mean detx,y = (12592.29, -9677.15) 
[Sat Mar 10 07:29:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 07:29:50 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 07:29:50 2012] Setting source spectrum file to fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Mar 10 07:29:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Mar 10 08:53:52 2012] Updating aperture counts using extracted products
[Sat Mar 10 08:53:52 2012] Error reading totcts from fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Mar 10 08:53:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 08:53:54 2012] Using photon index=1.80, rate=0.000899, arf fullrun_mos2_xmm0505140401_pi300-10000_pass1_cl_src43.arf
[Sat Mar 10 08:53:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 08:53:54 2012] Updating source flux to 3e-14