[Thu Mar  8 22:50:06 2012] Detection parameters:
  Position = (289.3, 296.1) = 3 33 31.32 -36 8 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 474.8 +/- 31.4
  Background counts = 84.4
  Rate = 0.004 +/- 0.0003

[Thu Mar  8 22:50:07 2012] Off-axis axis estimate = 0.68'
[Fri Mar  9 03:28:40 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 03:28:40 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Fri Mar  9 03:28:40 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Fri Mar  9 03:28:40 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 6.77"
[Fri Mar  9 05:29:08 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_src14.ximg exists
[Fri Mar  9 05:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_src14.csv
[Fri Mar  9 05:29:08 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Mar  9 05:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_src14.csv
[Fri Mar  9 05:29:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 05:29:09 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Mar  9 05:29:09 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Mar  9 05:29:09 2012] Fit fullrun_mos1_xmm0505140401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Mar  9 07:57:09 2012] Source 33 is offset by 6.516901 and 1.930128 pixels which is larger than
2 X fitted extent = 4.178097 x 4.178097, not incorporating fit results
[Fri Mar  9 07:57:09 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 07:57:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 07:57:09 2012] Assessing source extent using major
[Fri Mar  9 07:57:09 2012] Source does appear to be extended
[Fri Mar  9 07:57:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 16:23:41 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 16:23:41 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Fri Mar  9 16:23:41 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Fri Mar  9 16:23:41 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 6.77"
[Fri Mar  9 18:50:02 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_src12.ximg exists
[Fri Mar  9 18:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_src12.csv
[Fri Mar  9 18:50:02 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Mar  9 18:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_src12.csv
[Fri Mar  9 18:50:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 18:50:03 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Mar  9 18:50:03 2012] fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Mar  9 18:50:03 2012] Fit fullrun_mos1_xmm0505140401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Mar  9 21:28:39 2012] Source 33 is offset by 6.516901 and 1.940450 pixels which is larger than
2 X fitted extent = 4.177186 x 4.177186, not incorporating fit results
[Fri Mar  9 21:28:40 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 21:28:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 21:28:40 2012] Assessing source extent using major
[Fri Mar  9 21:28:40 2012] Source does appear to be extended
[Fri Mar  9 21:28:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 04:55:20 2012] XMMSAS src. selection expression = ellipse(25119.802429, 25711.303131, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 04:55:20 2012] Writing source region out to fullrun_mos1_xmm0505140401_pi300-10000_pass1_cl_src33_src.reg
[Sat Mar 10 04:55:20 2012] Extracting stamp from image fullrun_mos1_xmm0505140401_pi300-10000_cl_sm2.00.img.gz, (252, 259) - (327, 334)
[Sat Mar 10 04:55:20 2012] XMMSAS bgd. selection expression = annulus(25119.802429, 25711.303131, 1087.500000, 2175.000000, X, Y) && !ellipse(23911.318400, 25392.349200, 1891.956054, 1891.956054, 0.000000, X, Y) && !ellipse(24921.574614, 27462.041800, 435.696813, 435.696813, 0.000000, X, Y) && !ellipse(27129.781000, 26057.934600, 339.452010, 339.452010, 0.000000, X, Y) && !ellipse(22575.874000, 26438.370000, 477.860814, 477.860814, 0.000000, X, Y) && !ellipse(26396.418920, 24949.546000, 614.792818, 394.387211, 105.572328, X, Y) && !ellipse(24857.044800, 24744.219330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.390000, 25131.676000, 1143.648033, 1143.648033, 0.000000, X, Y) && !ellipse(22404.957977, 25714.138702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22834.135498, 25862.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23243.971130, 23446.738373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24724.970000, 27505.317800, 1174.936034, 1155.552033, 90.000000, X, Y)
[Sat Mar 10 04:55:20 2012] Writing fullrun_mos1_xmm0505140401_pi300-10000_pass1_cl_src33.gif
[Sat Mar 10 05:05:14 2012] Mean detx,y = (-634.42, -903.69) 
[Sat Mar 10 05:05:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 05:05:26 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 05:05:26 2012] Setting source spectrum file to fullrun_mos1_xmm0505140401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar 10 05:05:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Mar 10 06:11:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 06:11:04 2012] rmf not generated due to insufficient counts
[Sat Mar 10 08:53:50 2012] Updating aperture counts using extracted products
[Sat Mar 10 08:53:50 2012] Error reading totcts from fullrun_mos1_xmm0505140401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar 10 08:53:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 08:53:51 2012] Using photon index=1.80, rate=0.00393, arf fullrun_mos1_xmm0505140401_pi300-10000_pass1_cl_src33.arf
[Sat Mar 10 08:53:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 08:53:51 2012] Updating source flux to 4e-14
[Sat Mar 10 08:53:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting