[Sun May  6 22:20:48 2012] Detection parameters:
  Position = (341.0, 246.2) = 3 33 12.75 -36 11 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1663.4 +/- 56.8
  Background counts = 342.0
  Rate = 0.02 +/- 0.0008

[Sun May  6 22:21:05 2012] Off-axis axis estimate = 4.88'
[Sun May  6 22:38:36 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sun May  6 22:38:36 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Sun May  6 22:38:36 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.163
[Sun May  6 22:38:36 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.87"
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src6.ximg exists
[Mon May  7 09:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src6.csv
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May  7 09:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src6.csv
[Mon May  7 09:33:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 09:33:40 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May  7 09:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May  7 09:33:40 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May  7 09:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May  7 09:33:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 18:32:25 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.015507 pixels away
[Mon May  7 18:32:26 2012] Vigneting correction estimate = 1.000000
[Mon May  7 18:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 18:32:26 2012] Assessing source extent using major
[Mon May  7 18:32:26 2012] Source does appear to be extended
[Mon May  7 18:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 18:33:43 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Mon May  7 18:33:43 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Mon May  7 18:33:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.163
[Mon May  7 18:33:43 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.87"
[Tue May  8 05:34:51 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src6.ximg exists
[Tue May  8 05:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src6.csv
[Tue May  8 05:34:51 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May  8 05:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src6.csv
[Tue May  8 05:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May  8 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May  8 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May  8 05:34:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 14:20:38 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.083097 pixels away
[Tue May  8 14:20:39 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:20:39 2012] Assessing source extent using major
[Tue May  8 14:20:39 2012] Source does appear to be extended
[Tue May  8 14:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 14:21:58 2012] Counts = 1663.402832, rescaling region sizes by 2.000000
[Tue May  8 14:21:58 2012] XMMSAS src. selection expression = ellipse(29615.919312, 21372.160873, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May  8 14:21:58 2012] Writing source region out to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src7_src.reg
[Tue May  8 14:21:58 2012] Extracting stamp from image fullrun_pn_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (266, 171) - (416, 321)
[Tue May  8 14:21:58 2012] XMMSAS bgd. selection expression = annulus(29615.919312, 21372.160873, 4350.000000, 8700.000000, X, Y) && !ellipse(30109.632000, 11931.858000, 1818.536052, 1179.600034, 125.948200, X, Y) && !ellipse(24316.456940, 24220.841370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23896.468000, 25479.070400, 2082.429660, 1867.260054, 92.654150, X, Y) && !ellipse(28812.568600, 13822.482800, 417.684812, 417.684812, 0.000000, X, Y) && !ellipse(38424.294952, 21888.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28868.417053, 13157.740509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35198.314880, 30683.432251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24930.404955, 27558.510666, 660.990611, 410.394149, 252.100356, X, Y) && !ellipse(22315.231262, 25062.615753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34267.640000, 27483.625800, 337.490410, 337.490410, 0.000000, X, Y) && !ellipse(23583.464417, 26875.512238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32769.673300, 27054.269600, 457.161613, 336.200810, 78.803251, X, Y) && !ellipse(21994.647095, 26844.201477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25545.600098, 26114.580841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27127.017853, 26154.536377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38077.402100, 25946.623688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22344.954315, 25589.901917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26386.625763, 25165.453003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24269.152000, 25457.310000, 626.246418, 626.246418, 0.000000, X, Y) && !ellipse(38365.778800, 24786.530400, 488.420814, 488.420814, 0.000000, X, Y) && !ellipse(24876.222076, 24831.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23071.139343, 24766.487061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22546.818000, 23856.972800, 614.568818, 614.568818, 0.000000, X, Y) && !ellipse(23184.031189, 23598.351166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.088000, 23619.950000, 332.471210, 332.471210, 0.000000, X, Y) && !ellipse(23695.764000, 23109.272000, 299.560009, 299.560009, 0.000000, X, Y) && !ellipse(23091.423380, 22898.609200, 439.658413, 439.658413, 0.000000, X, Y) && !ellipse(25229.221497, 22244.222504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32736.603000, 20114.861000, 570.840016, 570.840016, 0.000000, X, Y) && !ellipse(22331.481400, 18758.170600, 372.221611, 372.221611, 0.000000, X, Y) && !ellipse(20315.236191, 16556.292175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31125.531799, 12697.791199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25230.421570, 12555.493576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27800.651886, 12228.092621, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 14:21:58 2012] Writing fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src7.gif
[Tue May  8 15:22:51 2012] Mean detx,y = (-6838.41, 1070.36) 
[Tue May  8 15:23:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 15:31:36 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 15:31:37 2012] Setting source spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May  8 15:31:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue May  8 19:27:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 19:27:51 2012] rmf not generated due to insufficient counts
[Wed May  9 07:37:08 2012] Updating aperture counts using extracted products
[Wed May  9 07:37:08 2012] Error reading totcts from fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May  9 07:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:37:20 2012] Using photon index=1.80, rate=0.022, arf fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src7.arf
[Wed May  9 07:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:37:20 2012] Updating source flux to 8e-14
[Wed May  9 07:50:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting