[Sun May 6 22:20:59 2012] Detection parameters: Position = (267.0, 271.8) = 3 33 39.32 -36 10 4.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 271.8 +/- 33.2 Background counts = 374.9 Rate = 0.003 +/- 0.0003 [Sun May 6 22:21:05 2012] Off-axis axis estimate = 2.98' [Sun May 6 22:38:36 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting [Sun May 6 22:38:36 2012] Initial guess for spatial extent in simple fitting = 7.92" [Sun May 6 22:38:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928 [Sun May 6 22:38:36 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 7.92" [Mon May 7 09:33:39 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src58.ximg exists [Mon May 7 09:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src58.csv [Mon May 7 09:33:39 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src58_1.ximg exists [Mon May 7 09:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src58.csv [Mon May 7 09:33:39 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src58_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 7 09:33:41 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists [Mon May 7 09:33:41 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists [Mon May 7 09:33:41 2012] Fit fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly [Mon May 7 18:32:26 2012] Warning, spatial fit 58 centroid is now closest to src. 65 [Mon May 7 18:32:26 2012] Vigneting correction estimate = 1.000000 [Mon May 7 18:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 7 18:32:26 2012] Assessing source extent using major [Mon May 7 18:32:26 2012] Source does appear to be extended [Mon May 7 18:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 7 18:33:43 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting [Mon May 7 18:33:43 2012] Initial guess for spatial extent in simple fitting = 7.92" [Mon May 7 18:33:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928 [Mon May 7 18:33:43 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 7.92" [Tue May 8 05:34:52 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src56.ximg exists [Tue May 8 05:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src56.csv [Tue May 8 05:34:52 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src56_1.ximg exists [Tue May 8 05:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src56.csv [Tue May 8 05:34:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src56_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 8 05:34:54 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src56.ximg exists [Tue May 8 05:34:54 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists [Tue May 8 05:34:54 2012] Fit fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly [Tue May 8 14:20:39 2012] Warning, spatial fit 56 centroid is now closest to src. 57 [Tue May 8 14:20:39 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 14.114141 pixels away [Tue May 8 14:20:39 2012] Source 60 is offset by -6.041388 and 5.811342 pixels which is larger than 2 X fitted extent = 2.226285 x 2.226285, not incorporating fit results [Tue May 8 14:20:39 2012] Vigneting correction estimate = 1.000000 [Tue May 8 14:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 8 14:20:39 2012] Assessing source extent using major [Tue May 8 14:20:39 2012] Source does appear to be extended [Tue May 8 14:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 14:22:02 2012] XMMSAS src. selection expression = ellipse(23184.031189, 23598.351166, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 8 14:22:02 2012] Writing source region out to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src60_src.reg [Tue May 8 14:22:02 2012] Extracting stamp from image fullrun_pn_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (230, 234) - (305, 309) [Tue May 8 14:22:02 2012] XMMSAS bgd. selection expression = annulus(23184.031189, 23598.351166, 1087.500000, 2175.000000, X, Y) && !ellipse(24316.456940, 24220.841370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23896.468000, 25479.070400, 2082.429660, 1867.260054, 92.654150, X, Y) && !ellipse(22315.231262, 25062.615753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25545.600098, 26114.580841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22344.954315, 25589.901917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24269.152000, 25457.310000, 626.246418, 626.246418, 0.000000, X, Y) && !ellipse(24876.222076, 24831.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23071.139343, 24766.487061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22546.818000, 23856.972800, 614.568818, 614.568818, 0.000000, X, Y) && !ellipse(21959.088000, 23619.950000, 332.471210, 332.471210, 0.000000, X, Y) && !ellipse(23695.764000, 23109.272000, 299.560009, 299.560009, 0.000000, X, Y) && !ellipse(23091.423380, 22898.609200, 439.658413, 439.658413, 0.000000, X, Y) && !ellipse(25229.221497, 22244.222504, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 8 14:22:02 2012] Writing fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src60.gif [Tue May 8 17:45:13 2012] Mean detx,y = (-843.02, -2119.28) [Tue May 8 17:45:29 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 8 17:46:54 2012] Binned source spectrum to 10 counts/bin [Tue May 8 17:46:55 2012] Setting source spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src60_src_b10.pi.gz [Tue May 8 17:46:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src60_bgd.pi.gz [Tue May 8 21:42:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue May 8 21:42:47 2012] rmf not generated due to insufficient counts [Wed May 9 07:37:16 2012] Updating aperture counts using extracted products [Wed May 9 07:37:16 2012] Error reading totcts from fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src60_src_b10.pi.gz [Wed May 9 07:37:25 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 9 07:37:25 2012] Using photon index=1.80, rate=0.00275, arf fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src60.arf [Wed May 9 07:37:25 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 9 07:37:25 2012] Updating source flux to 8.3e-15 [Wed May 9 07:50:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting