[Sun May 6 22:20:58 2012] Detection parameters: Position = (259.5, 274.9) = 3 33 42.04 -36 9 49.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 298.2 +/- 35.0 Background counts = 372.5 Rate = 0.003 +/- 0.0004 [Sun May 6 22:21:05 2012] Off-axis axis estimate = 3.30' [Sun May 6 22:38:36 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting [Sun May 6 22:38:36 2012] Initial guess for spatial extent in simple fitting = 8.08" [Sun May 6 22:38:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900 [Sun May 6 22:38:36 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.08" [Mon May 7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src55.ximg exists [Mon May 7 09:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src55.csv [Mon May 7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src55_1.ximg exists [Mon May 7 09:33:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src55.csv [Mon May 7 09:33:39 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 7 09:33:41 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Mon May 7 09:33:41 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Mon May 7 09:33:41 2012] Fit fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Mon May 7 18:32:26 2012] Warning, spatial fit 55 centroid is now closest to src. 63 [Mon May 7 18:32:26 2012] Source 57 is offset by -1.216024 and -5.721731 pixels which is larger than 2 X fitted extent = 0.958644 x 0.958644, not incorporating fit results [Mon May 7 18:32:26 2012] Source 57 is offset by 0.251102 and 3.548246 pixels which is larger than 2 X fitted extent = 0.935853 x 0.935853, not incorporating fit results [Mon May 7 18:32:26 2012] Vigneting correction estimate = 1.000000 [Mon May 7 18:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 7 18:32:26 2012] Assessing source extent using major [Mon May 7 18:32:26 2012] Source does appear to be extended [Mon May 7 18:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 7 18:32:26 2012] Source is confused with source 63 [Mon May 7 18:33:43 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting [Mon May 7 18:33:43 2012] Initial guess for spatial extent in simple fitting = 8.08" [Mon May 7 18:33:43 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900 [Mon May 7 18:33:43 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 8.08" [Tue May 8 05:34:52 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src53.ximg exists [Tue May 8 05:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src53.csv [Tue May 8 05:34:52 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src53_1.ximg exists [Tue May 8 05:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src53.csv [Tue May 8 05:34:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 8 05:34:54 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists [Tue May 8 05:34:54 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists [Tue May 8 05:34:54 2012] Fit fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly [Tue May 8 14:20:39 2012] Warning, spatial fit 53 centroid is now closest to src. 63 [Tue May 8 14:20:39 2012] Spatial fit model total counts = 2243.920000, observed total counts = 2228.000000 [Tue May 8 14:20:39 2012] Offset between fit and detection position for source 57 = 0.314324 pixels [Tue May 8 14:20:39 2012] Warning, changing simple spatial fit ID from 53 to 56 [Tue May 8 14:20:39 2012] 2195.526000 total counts/ 2051.310000 bgd. counts: snr = 3.184181 Spatial fit parameters: Offset between fit and detection position for source 57 = 0.314324 pixels Position = (259.7, 274.8) = 3 33 41.95 -36 9 49.5 Extent = 7.7 (4.9-10.7)", rotation angle = 0 Source counts = 144.2 +/- 46.9 Background counts = 2051.3 Rate = 0.002 +/- 0.0008 [Tue May 8 14:20:39 2012] Vigneting correction estimate = 1.000000 [Tue May 8 14:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 8 14:20:39 2012] Assessing source extent using major axis lower bound [Tue May 8 14:20:39 2012] Source does appear to be extended [Tue May 8 14:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 14:22:01 2012] XMMSAS src. selection expression = ellipse(22546.818000, 23856.972800, 460.926613, 460.926613, 0.000000, X, Y) [Tue May 8 14:22:01 2012] Writing source region out to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src57_src.reg [Tue May 8 14:22:01 2012] Extracting stamp from image fullrun_pn_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (233, 248) - (286, 301) [Tue May 8 14:22:02 2012] XMMSAS bgd. selection expression = annulus(22546.818000, 23856.972800, 768.211022, 1536.422044, X, Y) && !ellipse(24316.456940, 24220.841370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23896.468000, 25479.070400, 2082.429660, 1867.260054, 92.654150, X, Y) && !ellipse(22315.231262, 25062.615753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22344.954315, 25589.901917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24269.152000, 25457.310000, 626.246418, 626.246418, 0.000000, X, Y) && !ellipse(24876.222076, 24831.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23071.139343, 24766.487061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23184.031189, 23598.351166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.088000, 23619.950000, 332.471210, 332.471210, 0.000000, X, Y) && !ellipse(23695.764000, 23109.272000, 299.560009, 299.560009, 0.000000, X, Y) && !ellipse(23091.423380, 22898.609200, 439.658413, 439.658413, 0.000000, X, Y) [Tue May 8 14:22:02 2012] Writing fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src57.gif [Tue May 8 17:37:45 2012] Mean detx,y = (-190.92, -2405.17) [Tue May 8 17:37:55 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 8 17:38:26 2012] Binned source spectrum to 10 counts/bin [Tue May 8 17:38:27 2012] Setting source spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src57_src_b10.pi.gz [Tue May 8 17:38:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src57_bgd.pi.gz [Wed May 9 07:37:15 2012] Updating aperture counts using extracted products [Wed May 9 07:37:15 2012] Error reading totcts from fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src57_src_b10.pi.gz [Wed May 9 07:37:25 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 9 07:37:25 2012] Using photon index=1.80, rate=0.00236, arf fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src57.arf [Wed May 9 07:37:25 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 9 07:37:25 2012] Updating source flux to 7.6e-15 [Wed May 9 07:50:56 2012] Flag b found in src. 57 procflags, skipping spectral fitting [Wed May 9 07:50:56 2012] Flag c found in src. 57 procflags, skipping spectral fitting