[Sun May  6 22:20:56 2012] Detection parameters:
  Position = (257.4, 294.7) = 3 33 42.78 -36 8 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 376.2 +/- 39.6
  Background counts = 375.5
  Rate = 0.003 +/- 0.0003

[Sun May  6 22:21:05 2012] Off-axis axis estimate = 2.99'
[Sun May  6 22:38:36 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Sun May  6 22:38:36 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Sun May  6 22:38:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.882
[Sun May  6 22:38:36 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.92"
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src45.ximg exists
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon May  7 09:33:38 2012] Fit fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src45 appears to have run properly
[Mon May  7 09:33:41 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon May  7 09:33:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src45.csv
[Mon May  7 09:33:41 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon May  7 09:33:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src45.csv
[Mon May  7 09:33:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 18:32:25 2012] Warning, spatial fit 45 centroid is now closest to src. 54
[Mon May  7 18:32:26 2012] Vigneting correction estimate = 1.000000
[Mon May  7 18:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 18:32:26 2012] Assessing source extent using major
[Mon May  7 18:32:26 2012] Source does appear to be extended
[Mon May  7 18:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 18:32:26 2012] Source is confused with source 17
[Mon May  7 18:33:43 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Mon May  7 18:33:43 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Mon May  7 18:33:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.882
[Mon May  7 18:33:43 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 7.92"
[Tue May  8 05:34:52 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src44.ximg exists
[Tue May  8 05:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src44.csv
[Tue May  8 05:34:52 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue May  8 05:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src44.csv
[Tue May  8 05:34:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue May  8 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue May  8 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue May  8 05:34:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 14:20:39 2012] Warning, spatial fit 44 centroid is now closest to src. 40
[Tue May  8 14:20:39 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:20:39 2012] Assessing source extent using major
[Tue May  8 14:20:39 2012] Source does appear to be extended
[Tue May  8 14:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 14:22:01 2012] XMMSAS src. selection expression = ellipse(22344.954315, 25589.901917, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 14:22:01 2012] Writing source region out to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src47_src.reg
[Tue May  8 14:22:01 2012] Extracting stamp from image fullrun_pn_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (220, 257) - (295, 332)
[Tue May  8 14:22:01 2012] XMMSAS bgd. selection expression = annulus(22344.954315, 25589.901917, 1087.500000, 2175.000000, X, Y) && !ellipse(24316.456940, 24220.841370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23896.468000, 25479.070400, 2082.429660, 1867.260054, 92.654150, X, Y) && !ellipse(24930.404955, 27558.510666, 660.990611, 410.394149, 252.100356, X, Y) && !ellipse(22315.231262, 25062.615753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19418.206000, 28131.622000, 1497.656043, 1497.656043, 0.000000, X, Y) && !ellipse(23583.464417, 26875.512238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21994.647095, 26844.201477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24269.152000, 25457.310000, 626.246418, 626.246418, 0.000000, X, Y) && !ellipse(24876.222076, 24831.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23071.139343, 24766.487061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22546.818000, 23856.972800, 614.568818, 614.568818, 0.000000, X, Y) && !ellipse(23184.031189, 23598.351166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.088000, 23619.950000, 332.471210, 332.471210, 0.000000, X, Y)
[Tue May  8 14:22:01 2012] Writing fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src47.gif
[Tue May  8 17:11:36 2012] Mean detx,y = (1220.29, -1361.46) 
[Tue May  8 17:11:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 17:12:58 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 17:12:59 2012] Setting source spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue May  8 17:12:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue May  8 20:47:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 20:47:17 2012] rmf not generated due to insufficient counts
[Wed May  9 07:37:14 2012] Updating aperture counts using extracted products
[Wed May  9 07:37:14 2012] Error reading totcts from fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed May  9 07:37:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:37:24 2012] Using photon index=1.80, rate=0.00296, arf fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src47.arf
[Wed May  9 07:37:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:37:24 2012] Updating source flux to 9.3e-15
[Wed May  9 07:50:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting