[Sun May  6 22:20:49 2012] Detection parameters:
  Position = (271.1, 407.4) = 3 33 37.83 -36 0 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1243.7 +/- 46.8
  Background counts = 301.3
  Rate = 0.01 +/- 0.0004

[Sun May  6 22:21:05 2012] Off-axis axis estimate = 8.15'
[Sun May  6 22:38:36 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun May  6 22:38:36 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Sun May  6 22:38:36 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.589
[Sun May  6 22:38:36 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.50"
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src9.ximg exists
[Mon May  7 09:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src9.csv
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon May  7 09:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src9.csv
[Mon May  7 09:33:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 09:33:40 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon May  7 09:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon May  7 09:33:40 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May  7 09:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon May  7 09:33:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 18:32:25 2012] Spatial fit model total counts = 1993.080000, observed total counts = 1605.000000
[Mon May  7 18:32:25 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 18:32:26 2012] Vigneting correction estimate = 1.000000
[Mon May  7 18:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 18:32:26 2012] Assessing source extent using major
[Mon May  7 18:32:26 2012] Source does appear to be extended
[Mon May  7 18:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 18:33:43 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Mon May  7 18:33:43 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Mon May  7 18:33:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.589
[Mon May  7 18:33:43 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.50"
[Tue May  8 05:34:51 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src9.ximg exists
[Tue May  8 05:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src9.csv
[Tue May  8 05:34:51 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May  8 05:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src9.csv
[Tue May  8 05:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May  8 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May  8 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue May  8 05:34:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 14:20:38 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.984293 pixels away
[Tue May  8 14:20:39 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:20:39 2012] Assessing source extent using major
[Tue May  8 14:20:39 2012] Source does appear to be extended
[Tue May  8 14:20:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 14:21:58 2012] Counts = 1243.695679, rescaling region sizes by 2.000000
[Tue May  8 14:21:58 2012] XMMSAS src. selection expression = ellipse(23540.083893, 35396.653534, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May  8 14:21:58 2012] Writing source region out to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src10_src.reg
[Tue May  8 14:21:58 2012] Extracting stamp from image fullrun_pn_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (196, 332) - (346, 482)
[Tue May  8 14:21:58 2012] XMMSAS bgd. selection expression = annulus(23540.083893, 35396.653534, 4350.000000, 8700.000000, X, Y) && !ellipse(23896.468000, 25479.070400, 2082.429660, 1867.260054, 92.654150, X, Y) && !ellipse(16376.605103, 30768.475494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24930.404955, 27558.510666, 660.990611, 410.394149, 252.100356, X, Y) && !ellipse(18626.406600, 26924.305200, 433.489612, 433.489612, 0.000000, X, Y) && !ellipse(26292.932434, 39241.417389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21471.174881, 39358.366119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21969.646240, 37273.664400, 466.714413, 331.312810, -0.000000, X, Y) && !ellipse(29921.603455, 36923.282104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21662.643646, 35855.352325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32995.811432, 33086.539093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27995.164600, 32200.858200, 449.576813, 449.576813, 0.000000, X, Y) && !ellipse(26318.173798, 31378.880005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18678.968185, 29168.602631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19418.206000, 28131.622000, 1497.656043, 1497.656043, 0.000000, X, Y) && !ellipse(23583.464417, 26875.512238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21994.647095, 26844.201477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25545.600098, 26114.580841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27127.017853, 26154.536377, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 14:21:58 2012] Writing fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src10.gif
[Tue May  8 15:39:00 2012] Mean detx,y = (7340.76, 6326.36) 
[Tue May  8 15:39:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 15:47:46 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 15:47:47 2012] Setting source spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May  8 15:47:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May  8 19:30:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 19:30:20 2012] rmf not generated due to insufficient counts
[Wed May  9 07:37:09 2012] Updating aperture counts using extracted products
[Wed May  9 07:37:09 2012] Error reading totcts from fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May  9 07:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:37:20 2012] Using photon index=1.80, rate=0.0098, arf fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src10.arf
[Wed May  9 07:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:37:20 2012] Updating source flux to 4.7e-14
[Wed May  9 07:50:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting