[Sun May  6 22:20:47 2012] Detection parameters:
  Position = (342.5, 137.0) = 3 33 12.18 -36 19 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20398.4 +/- 174.1
  Background counts = 284.9
  Rate = 0.2 +/- 0.001

[Sun May  6 22:21:05 2012] Off-axis axis estimate = 12.13'
[Sun May  6 22:38:36 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Sun May  6 22:38:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 22:38:36 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Sun May  6 22:38:36 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.923
[Sun May  6 22:38:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.50"
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src1.ximg exists
[Mon May  7 09:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src1.csv
[Mon May  7 09:33:38 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May  7 09:33:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src1.csv
[Mon May  7 09:33:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 09:33:40 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May  7 09:33:40 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May  7 09:33:40 2012] Fit fullrun_pn_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May  7 18:32:25 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.190045 pixels away
[Mon May  7 18:32:26 2012] Spatial fit model total counts = 2163.070000, observed total counts = 2154.000000
[Mon May  7 18:32:26 2012] Offset between fit and detection position for source 1 = 4.760845 pixels
[Mon May  7 18:32:26 2012] Warning, changing simple spatial fit ID from 1 to 82
[Mon May  7 18:32:26 2012] 2170.371000 total counts/ 1611.960000 bgd. counts: snr = 13.908389
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.760845 pixels
  Position = (346.6, 139.3) = 3 33 10.69 -36 19 38.8
  Extent = 18.8 (17.4-22.6)", rotation angle = 0
  Source counts = 558.4 +/- 46.6
  Background counts = 1612.0
  Rate = 0.009 +/- 0.0008
[Mon May  7 18:32:26 2012] Vigneting correction estimate = 1.000000
[Mon May  7 18:32:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 18:32:26 2012] Assessing source extent using major axis lower bound
[Mon May  7 18:32:26 2012] Source does appear to be extended
[Mon May  7 18:32:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 18:33:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 18:33:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 18:33:43 2012] Initial guess for spatial extent in simple fitting = 18.79"
[Mon May  7 18:33:43 2012] source mask rpix=4.3, npix_max = 92, mask sum = 90, frac = 0.969
[Mon May  7 18:33:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 18.79"
[Tue May  8 05:34:51 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May  8 05:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src1.csv
[Tue May  8 05:34:51 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May  8 05:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src1.csv
[Tue May  8 05:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May  8 05:34:53 2012] fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May  8 05:34:53 2012] Fit fullrun_pn_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May  8 14:20:38 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Tue May  8 14:20:39 2012] Spatial fit model total counts = 2157.380000, observed total counts = 2154.000000
[Tue May  8 14:20:39 2012] Offset between fit and detection position for source 1 = 1.577862 pixels
[Tue May  8 14:20:39 2012] Warning, changing simple spatial fit ID from 1 to 78
[Tue May  8 14:20:39 2012] 2166.560000 total counts/ 1587.330000 bgd. counts: snr = 14.538427
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.577862 pixels
  Position = (346.6, 137.7) = 3 33 10.69 -36 19 45.7
  Extent = 22.7 (19.0-24.6)" x 14.7 (9.7-17.7)", rotation angle = 126 (107-136) degrees
  Source counts = 579.2 +/- 46.5
  Background counts = 1587.3
  Rate = 0.009 +/- 0.0008
[Tue May  8 14:20:39 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:20:39 2012] Assessing source extent using major axis lower bound
[Tue May  8 14:20:39 2012] Source does appear to be extended
[Tue May  8 14:20:39 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Tue May  8 14:20:39 2012] Source is confused with source 84
[Tue May  8 14:21:57 2012] XMMSAS src. selection expression = ellipse(30109.632000, 11931.858000, 1363.902039, 884.700025, 125.948200, X, Y)
[Tue May  8 14:21:57 2012] Writing source region out to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1_src.reg
[Tue May  8 14:21:57 2012] Extracting stamp from image fullrun_pn_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (268, 59) - (425, 216)
[Tue May  8 14:21:57 2012] XMMSAS bgd. selection expression = annulus(30109.632000, 11931.858000, 2273.170065, 4546.340131, X, Y) && !ellipse(28812.568600, 13822.482800, 417.684812, 417.684812, 0.000000, X, Y) && !ellipse(28868.417053, 13157.740509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29567.462372, 7418.047066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30982.590000, 7739.754800, 506.972815, 506.972815, 0.000000, X, Y) && !ellipse(31125.531799, 12697.791199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25230.421570, 12555.493576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27800.651886, 12228.092621, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 14:21:57 2012] Writing fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1.gif
[Tue May  8 14:23:37 2012] Mean detx,y = (-13878.72, -5431.85) 
[Tue May  8 14:23:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 14:25:59 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 14:26:00 2012] Setting source spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  8 14:26:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  9 07:37:07 2012] Updating aperture counts using extracted products
[Wed May  9 07:37:07 2012] Error reading totcts from fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  9 07:37:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:37:19 2012] Using photon index=1.80, rate=0.00946, arf fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1.arf
[Wed May  9 07:37:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:37:20 2012] Updating source flux to 6.8e-14
[Wed May  9 07:50:56 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed May  9 07:55:27 2012] Reading fit data from xmm0505140201/analysis//spectral/fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1_pl.csv
[Wed May  9 07:55:27 2012] Spectral fit parameter nH value = 3.66228e+20
[Wed May  9 07:55:27 2012] Spectral fit parameter PhoIndex value = 2.2443
[Wed May  9 07:55:27 2012] Failed to get F(0.3-8.0) from xmm0505140201/analysis//spectral/fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May  9 07:55:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:55:27 2012] Using Nh = 3.7e+20, photon index=2.24, rate=0.00946, arf fullrun_pn_xmm0505140201_pi300-10000_pass1_cl_src1.arf
[Wed May  9 07:55:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:55:27 2012] Updating source flux to 5.7e-14