[Sun May  6 22:21:17 2012] Detection parameters:
  Position = (342.6, 137.1) = 3 33 12.15 -36 19 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9691.7 +/- 118.9
  Background counts = 165.0
  Rate = 0.08 +/- 0.0009

[Sun May  6 22:21:17 2012] Off-axis axis estimate = 12.13'
[Mon May  7 09:33:42 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Mon May  7 09:33:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 09:33:42 2012] Initial guess for spatial extent in simple fitting = 12.49"
[Mon May  7 09:33:42 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.924
[Mon May  7 09:33:42 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.49"
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src2.ximg exists
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May  7 12:44:00 2012] Fit fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May  7 12:44:00 2012] Fit fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon May  7 18:32:44 2012] Warning, spatial fit 2 centroid is now closest to src. 37
[Mon May  7 18:32:44 2012] Spatial fit model total counts = 1752.570000, observed total counts = 1689.000000
[Mon May  7 18:32:44 2012] Offset between fit and detection position for source 44 = 7.039167 pixels
[Mon May  7 18:32:44 2012] Warning, changing simple spatial fit ID from 2 to 42
[Mon May  7 18:32:44 2012] 1764.769000 total counts/ 1457.970000 bgd. counts: snr = 8.034885
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 7.039167 pixels
  Position = (349.1, 139.8) = 3 33 9.82 -36 19 36.4
  Extent = 15.5 (8.1-22.9)", rotation angle = 0
  Source counts = 306.8 +/- 42.0
  Background counts = 1458.0
  Rate = 0.003 +/- 0.0004
[Mon May  7 18:32:44 2012] Vigneting correction estimate = 1.000000
[Mon May  7 18:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 18:32:44 2012] Assessing source extent using major axis lower bound
[Mon May  7 18:32:44 2012] Source does appear to be extended
[Mon May  7 18:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 18:32:44 2012] Source is confused with source 37
[Tue May  8 05:34:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 05:34:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  8 05:34:54 2012] Initial guess for spatial extent in simple fitting = 15.49"
[Tue May  8 05:34:54 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.970
[Tue May  8 05:34:54 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 15.49"
[Tue May  8 08:47:30 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src2.ximg exists
[Tue May  8 08:47:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src2.csv
[Tue May  8 08:47:30 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May  8 08:47:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src2.csv
[Tue May  8 08:47:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May  8 08:47:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May  8 08:47:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May  8 08:47:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 14:20:56 2012] Warning, spatial fit 2 centroid is now closest to src. 36
[Tue May  8 14:20:56 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:20:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:20:56 2012] Assessing source extent using major axis lower bound
[Tue May  8 14:20:56 2012] Source does appear to be extended
[Tue May  8 14:20:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 22:38:03 2012] XMMSAS src. selection expression = ellipse(30318.924000, 12116.857840, 929.658027, 929.658027, 0.000000, X, Y)
[Tue May  8 22:38:03 2012] Writing source region out to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src44_src.reg
[Tue May  8 22:38:03 2012] Extracting stamp from image fullrun_mos1_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (296, 86) - (402, 193)
[Tue May  8 22:38:03 2012] XMMSAS bgd. selection expression = annulus(30318.924000, 12116.857840, 1549.430045, 3098.860089, X, Y) && !ellipse(28795.512108, 13829.989135, 495.814856, 253.923961, 346.223705, X, Y) && !ellipse(28855.903900, 13129.103363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31166.785645, 12089.285034, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 22:38:03 2012] Writing fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src44.gif
[Tue May  8 22:53:47 2012] Mean detx,y = (5354.65, -14205.38) 
[Tue May  8 22:53:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 22:54:45 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 22:54:45 2012] Setting source spectrum file to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue May  8 22:54:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed May  9 07:37:28 2012] Updating aperture counts using extracted products
[Wed May  9 07:37:28 2012] Error reading totcts from fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed May  9 07:37:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:37:33 2012] Using photon index=1.80, rate=0.00263, arf fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src44.arf
[Wed May  9 07:37:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:37:33 2012] Updating source flux to 7.3e-14
[Wed May  9 07:37:48 2012] Flag c found in src. 44 procflags, skipping spectral fitting