[Sun May  6 22:21:11 2012] Detection parameters:
  Position = (286.4, 285.2) = 3 33 32.35 -36 9 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.9 +/- 26.6
  Background counts = 227.2
  Rate = 0.001 +/- 0.0002

[Sun May  6 22:21:17 2012] Off-axis axis estimate = 1.29'
[Mon May  7 09:33:42 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Mon May  7 09:33:42 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Mon May  7 09:33:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.106
[Mon May  7 09:33:42 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.08"
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src31.ximg exists
[Mon May  7 12:44:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src31.csv
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon May  7 12:44:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src31.csv
[Mon May  7 12:44:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:44:01 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon May  7 12:44:01 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon May  7 12:44:01 2012] Fit fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon May  7 18:32:44 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.067715 pixels away
[Mon May  7 18:32:44 2012] Vigneting correction estimate = 1.000000
[Mon May  7 18:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 18:32:44 2012] Assessing source extent using major
[Mon May  7 18:32:44 2012] Source does appear to be extended
[Mon May  7 18:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:34:54 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Tue May  8 05:34:54 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Tue May  8 05:34:54 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.106
[Tue May  8 05:34:54 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.08"
[Tue May  8 08:47:30 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src31.ximg exists
[Tue May  8 08:47:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src31.csv
[Tue May  8 08:47:30 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue May  8 08:47:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src31.csv
[Tue May  8 08:47:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue May  8 08:47:31 2012] Fit fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Tue May  8 14:20:56 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.067715 pixels away
[Tue May  8 14:20:56 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:20:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:20:56 2012] Assessing source extent using major
[Tue May  8 14:20:56 2012] Source does appear to be extended
[Tue May  8 14:20:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 22:38:03 2012] XMMSAS src. selection expression = ellipse(24871.971375, 24765.709137, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 22:38:03 2012] Writing source region out to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src20_src.reg
[Tue May  8 22:38:03 2012] Extracting stamp from image fullrun_mos1_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (249, 248) - (324, 323)
[Tue May  8 22:38:03 2012] XMMSAS bgd. selection expression = annulus(24871.971375, 24765.709137, 1087.500000, 2175.000000, X, Y) && !ellipse(23908.901000, 25497.108600, 1958.916056, 1958.916056, 0.000000, X, Y) && !ellipse(22123.008469, 25237.321991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.564600, 24090.340800, 382.180011, 382.180011, 0.000000, X, Y) && !ellipse(24443.096000, 22368.178000, 373.029611, 373.029611, 0.000000, X, Y) && !ellipse(22584.695390, 26511.541688, 523.273963, 260.863980, 90.000000, X, Y) && !ellipse(27135.105000, 26150.005600, 346.811210, 346.811210, 0.000000, X, Y) && !ellipse(25136.463800, 25836.841800, 385.772811, 347.677610, 121.377300, X, Y) && !ellipse(26380.977800, 25098.211800, 548.349616, 313.440009, 97.459753, X, Y) && !ellipse(23056.104200, 22889.728800, 432.168812, 432.168812, 0.000000, X, Y) && !ellipse(23157.070000, 22971.094000, 1264.856036, 1264.856036, 0.000000, X, Y) && !ellipse(27615.232605, 25743.041351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26146.502000, 25159.818000, 1060.000031, 1060.000031, 0.000000, X, Y) && !ellipse(23436.030640, 23587.462891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.833771, 25712.593475, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 22:38:03 2012] Writing fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src20.gif
[Tue May  8 23:37:51 2012] Mean detx,y = (177.03, -1396.31) 
[Tue May  8 23:37:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 23:38:21 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 23:38:22 2012] Setting source spectrum file to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue May  8 23:38:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed May  9 03:18:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  9 03:18:58 2012] rmf not generated due to insufficient counts
[Wed May  9 07:37:32 2012] Updating aperture counts using extracted products
[Wed May  9 07:37:32 2012] Error reading totcts from fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed May  9 07:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:37:35 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src20.arf
[Wed May  9 07:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:37:35 2012] Updating source flux to 1.4e-14
[Wed May  9 07:37:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting