[Sun May  6 22:21:10 2012] Detection parameters:
  Position = (258.0, 296.1) = 3 33 42.55 -36 8 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.6 +/- 25.8
  Background counts = 228.8
  Rate = 0.001 +/- 0.0002

[Sun May  6 22:21:17 2012] Off-axis axis estimate = 2.93'
[Mon May  7 09:33:42 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Mon May  7 09:33:42 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Mon May  7 09:33:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Mon May  7 09:33:42 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.90"
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src40.ximg exists
[Mon May  7 12:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src40.csv
[Mon May  7 12:44:00 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon May  7 12:44:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src40.csv
[Mon May  7 12:44:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:44:01 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon May  7 12:44:01 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon May  7 12:44:01 2012] Fit fullrun_mos1_xmm0505140201_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Mon May  7 18:32:44 2012] Source 15 is offset by -1.951446 and -7.809684 pixels which is larger than
2 X fitted extent = 1.378846 x 1.378846, not incorporating fit results
[Mon May  7 18:32:44 2012] Vigneting correction estimate = 1.000000
[Mon May  7 18:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 18:32:44 2012] Assessing source extent using major
[Mon May  7 18:32:44 2012] Source does appear to be extended
[Mon May  7 18:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 18:32:44 2012] Source is confused with source 18
[Tue May  8 05:34:54 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Tue May  8 05:34:54 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Tue May  8 05:34:54 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Tue May  8 05:34:54 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 7.90"
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src39.ximg exists
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue May  8 08:47:31 2012] Fit fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_src39 appears to have run properly
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue May  8 08:47:31 2012] fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue May  8 08:47:31 2012] Fit fullrun_mos1_xmm0505140201_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Tue May  8 14:20:56 2012] Source 15 is offset by -1.950736 and -7.801247 pixels which is larger than
2 X fitted extent = 1.370851 x 1.370851, not incorporating fit results
[Tue May  8 14:20:56 2012] Vigneting correction estimate = 1.000000
[Tue May  8 14:20:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 14:20:56 2012] Assessing source extent using major
[Tue May  8 14:20:56 2012] Source does appear to be extended
[Tue May  8 14:20:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 22:38:03 2012] XMMSAS src. selection expression = ellipse(22399.833771, 25712.593475, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 22:38:03 2012] Writing source region out to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src15_src.reg
[Tue May  8 22:38:03 2012] Extracting stamp from image fullrun_mos1_xmm0505140201_pi300-10000_cl_sm2.00.img.gz, (221, 259) - (296, 334)
[Tue May  8 22:38:04 2012] XMMSAS bgd. selection expression = annulus(22399.833771, 25712.593475, 1087.500000, 2175.000000, X, Y) && !ellipse(23908.901000, 25497.108600, 1958.916056, 1958.916056, 0.000000, X, Y) && !ellipse(22123.008469, 25237.321991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.564600, 24090.340800, 382.180011, 382.180011, 0.000000, X, Y) && !ellipse(24920.219652, 27571.987000, 434.494588, 434.494588, 0.000000, X, Y) && !ellipse(22584.695390, 26511.541688, 523.273963, 260.863980, 90.000000, X, Y) && !ellipse(21945.383280, 23637.706000, 385.404011, 385.404011, 0.000000, X, Y) && !ellipse(23157.070000, 22971.094000, 1264.856036, 1264.856036, 0.000000, X, Y) && !ellipse(24871.971375, 24765.709137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23436.030640, 23587.462891, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 22:38:04 2012] Writing fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src15.gif
[Tue May  8 23:51:11 2012] Mean detx,y = (1243.61, 897.38) 
[Tue May  8 23:51:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 23:51:47 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 23:51:50 2012] Setting source spectrum file to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue May  8 23:51:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May  9 03:47:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  9 03:47:51 2012] rmf not generated due to insufficient counts
[Wed May  9 07:37:33 2012] Updating aperture counts using extracted products
[Wed May  9 07:37:33 2012] Error reading totcts from fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May  9 07:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:37:35 2012] Using photon index=1.80, rate=0.00108, arf fullrun_mos1_xmm0505140201_pi300-10000_pass1_cl_src15.arf
[Wed May  9 07:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:37:35 2012] Updating source flux to 1.1e-14
[Wed May  9 07:37:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting