[Thu May  3 13:40:52 2012] Detection parameters:
  Position = (335.2, 79.3) = 20 32 54.21 41 4 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 486.8 +/- 35.5
  Background counts = 87.4
  Rate = 0.02 +/- 0.001

[Thu May  3 13:40:58 2012] Off-axis axis estimate = 16.11'
[Thu May  3 13:49:11 2012] Using EEF radius (= 14.48 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 14.48"
[Thu May  3 13:49:11 2012] source mask rpix=3.3, npix_max = 58, mask sum = 48, frac = 0.818
[Thu May  3 13:49:11 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 14.48"
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src78.ximg exists
[Fri May  4 19:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src78.csv
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src78_1.ximg exists
[Fri May  4 19:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src78.csv
[Fri May  4 19:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 19:18:32 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Fri May  4 19:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src78.csv
[Fri May  4 19:18:32 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Fri May  4 19:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src78.csv
[Fri May  4 19:18:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:41:20 2012] Warning, spatial fit 78 centroid is now closest to src. 134
[Sat May  5 14:41:21 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:21 2012] Assessing source extent using major
[Sat May  5 14:41:21 2012] Source does appear to be extended
[Sat May  5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:41:21 2012] Source is confused with source 135
[Sat May  5 14:43:04 2012] Using EEF radius (= 14.48 ")to estimate initial spatial extent for simple fitting
[Sat May  5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 14.48"
[Sat May  5 14:43:04 2012] source mask rpix=3.3, npix_max = 58, mask sum = 48, frac = 0.818
[Sat May  5 14:43:04 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 14.48"
[Sun May  6 06:51:23 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src72.ximg exists
[Sun May  6 06:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src72.csv
[Sun May  6 06:51:23 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src72_1.ximg exists
[Sun May  6 06:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src72.csv
[Sun May  6 06:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 06:51:27 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sun May  6 06:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sun May  6 06:51:27 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sun May  6 06:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sun May  6 06:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:35:32 2012] Warning, spatial fit 72 centroid is now closest to src. 130
[Sun May  6 20:35:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:33 2012] Assessing source extent using major
[Sun May  6 20:35:33 2012] Source does appear to be extended
[Sun May  6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:37:05 2012] XMMSAS src. selection expression = ellipse(29109.868073, 6851.930435, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  6 20:37:05 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src83_src.reg
[Sun May  6 20:37:05 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (298, 42) - (373, 117)
[Sun May  6 20:37:05 2012] XMMSAS bgd. selection expression = annulus(29109.868073, 6851.930435, 1087.500000, 2175.000000, X, Y) && !ellipse(31570.684631, 6847.018631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28466.211975, 8374.105194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.248627, 7883.879921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.307648, 7207.122910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30445.007965, 6427.055389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30093.195343, 7238.532570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28620.033752, 8975.732178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30963.938751, 8810.998230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.107330, 8713.695389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31588.653834, 7821.239841, 1479.984043, 709.322577, 57.385148, X, Y) && !ellipse(31158.066528, 7959.258858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31525.705780, 9703.390083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.276000, 9629.468000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(31590.034485, 9097.116798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30569.913818, 9528.670570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32112.934540, 8493.225075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.471283, 8390.024750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30536.561340, 8383.780785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.036652, 8024.348228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.653961, 7781.940071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29491.451538, 7516.896461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28952.775299, 7258.449936, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  6 20:37:05 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src83.gif
[Sun May  6 23:16:59 2012] Mean detx,y = (-8675.79, -16156.71) 
[Sun May  6 23:17:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 23:17:38 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 23:17:39 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sun May  6 23:17:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Mon May  7 03:55:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 03:55:16 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:33 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:34 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Mon May  7 15:15:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:46 2012] Using photon index=1.80, rate=0.0164, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src83.arf
[Mon May  7 15:15:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:46 2012] Updating source flux to 1.6e-13
[Mon May  7 15:32:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting