[Thu May  3 13:40:38 2012] Detection parameters:
  Position = (350.5, 74.4) = 20 32 48.31 41 3 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 387.1 +/- 26.2
  Background counts = 75.2
  Rate = 0.01 +/- 0.0009

[Thu May  3 13:40:58 2012] Off-axis axis estimate = 16.67'
[Thu May  3 13:49:11 2012] Using EEF radius (= 14.77 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:49:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 14.77"
[Thu May  3 13:49:11 2012] source mask rpix=3.4, npix_max = 60, mask sum = 32, frac = 0.528
[Thu May  3 13:49:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 14.77"
[Fri May  4 19:18:28 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src5.ximg exists
[Fri May  4 19:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src5.csv
[Fri May  4 19:18:28 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May  4 19:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src5.csv
[Fri May  4 19:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 19:18:30 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May  4 19:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May  4 19:18:30 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May  4 19:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May  4 19:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:41:20 2012] Warning, spatial fit 5 centroid is now closest to src. 26
[Sat May  5 14:41:21 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:21 2012] Assessing source extent using major
[Sat May  5 14:41:21 2012] Source does appear to be extended
[Sat May  5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:43:04 2012] Using EEF radius (= 14.77 ")to estimate initial spatial extent for simple fitting
[Sat May  5 14:43:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 14.77"
[Sat May  5 14:43:04 2012] source mask rpix=3.4, npix_max = 60, mask sum = 32, frac = 0.528
[Sat May  5 14:43:04 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.77"
[Sun May  6 06:51:20 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src5.ximg exists
[Sun May  6 06:51:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src5.csv
[Sun May  6 06:51:20 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May  6 06:51:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src5.csv
[Sun May  6 06:51:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 06:51:24 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May  6 06:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May  6 06:51:24 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May  6 06:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May  6 06:51:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:35:31 2012] Spatial fit model total counts = 4832.930000, observed total counts = 4069.000000
[Sun May  6 20:35:31 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 20:35:31 2012] Warning, spatial fit 5 centroid is now closest to src. 23
[Sun May  6 20:35:31 2012] Spatial fit model total counts = 5079.970000, observed total counts = 4439.000000
[Sun May  6 20:35:31 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 20:35:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:33 2012] Assessing source extent using major
[Sun May  6 20:35:33 2012] Source does appear to be extended
[Sun May  6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:36:55 2012] XMMSAS src. selection expression = ellipse(30445.007965, 6427.055389, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  6 20:36:55 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src8_src.reg
[Sun May  6 20:36:55 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (313, 37) - (388, 112)
[Sun May  6 20:36:55 2012] XMMSAS bgd. selection expression = annulus(30445.007965, 6427.055389, 1087.500000, 2175.000000, X, Y) && !ellipse(31570.684631, 6847.018631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28466.211975, 8374.105194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.248627, 7883.879921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.307648, 7207.122910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30093.195343, 7238.532570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32957.422363, 6574.783211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28620.033752, 8975.732178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30963.938751, 8810.998230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33389.642548, 8657.935791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32333.673676, 7593.867752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31588.653834, 7821.239841, 1479.984043, 709.322577, 57.385148, X, Y) && !ellipse(31158.066528, 7959.258858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33157.784149, 7006.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32310.123566, 6415.927498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29109.868073, 6851.930435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.276000, 9629.468000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(31590.034485, 9097.116798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32707.000000, 8390.191353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32112.934540, 8493.225075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.471283, 8390.024750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30536.561340, 8383.780785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.036652, 8024.348228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.653961, 7781.940071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29491.451538, 7516.896461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28952.775299, 7258.449936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.446442, 7072.440575, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  6 20:36:55 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src8.gif
[Sun May  6 21:19:04 2012] Mean detx,y = (-9885.70, -16280.58) 
[Sun May  6 21:19:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 21:19:45 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 21:19:46 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun May  6 21:19:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May  7 01:39:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 01:39:08 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:27 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:27 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May  7 15:15:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:40 2012] Using photon index=1.80, rate=0.0131, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src8.arf
[Mon May  7 15:15:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:40 2012] Updating source flux to 1.4e-13
[Mon May  7 15:32:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting