[Thu May  3 13:40:51 2012] Detection parameters:
  Position = (300.4, 202.2) = 20 33 7.56 41 13 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.0 +/- 21.3
  Background counts = 175.9
  Rate = 0.006 +/- 0.0007

[Thu May  3 13:40:58 2012] Off-axis axis estimate = 6.98'
[Thu May  3 13:49:11 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Thu May  3 13:49:11 2012] source mask rpix=2.3, npix_max = 30, mask sum = 16, frac = 0.518
[Thu May  3 13:49:11 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 9.92"
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src73.ximg exists
[Fri May  4 19:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src73.csv
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src73_1.ximg exists
[Fri May  4 19:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src73.csv
[Fri May  4 19:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 19:18:32 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Fri May  4 19:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri May  4 19:18:32 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Fri May  4 19:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri May  4 19:18:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:41:20 2012] Spatial fit model total counts = 1347.400000, observed total counts = 803.000000
[Sat May  5 14:41:20 2012] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 14:41:20 2012] Spatial fit model total counts = 952.185000, observed total counts = 723.000000
[Sat May  5 14:41:20 2012] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 14:41:21 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:21 2012] Assessing source extent using major
[Sat May  5 14:41:21 2012] Source does appear to be extended
[Sat May  5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:41:21 2012] Source is confused with source 79
[Sat May  5 14:43:04 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Sat May  5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Sat May  5 14:43:04 2012] source mask rpix=2.3, npix_max = 30, mask sum = 16, frac = 0.518
[Sat May  5 14:43:04 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.92"
[Sun May  6 06:51:23 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src67.ximg exists
[Sun May  6 06:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src67.csv
[Sun May  6 06:51:23 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src67_1.ximg exists
[Sun May  6 06:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src67.csv
[Sun May  6 06:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 06:51:26 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sun May  6 06:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sun May  6 06:51:26 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sun May  6 06:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sun May  6 06:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:35:32 2012] Source 78 is offset by 2.326237 and -3.335817 pixels which is larger than
2 X fitted extent = 2.792993 x 2.792993, not incorporating fit results
[Sun May  6 20:35:32 2012] Warning, spatial fit 67 centroid is now closest to src. 74
[Sun May  6 20:35:32 2012] Spatial fit model total counts = 1164.260000, observed total counts = 888.000000
[Sun May  6 20:35:32 2012] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 20:35:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:33 2012] Assessing source extent using major
[Sun May  6 20:35:33 2012] Source does appear to be extended
[Sun May  6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:37:04 2012] XMMSAS src. selection expression = ellipse(26089.084595, 17545.433960, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  6 20:37:04 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src78_src.reg
[Sun May  6 20:37:04 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (263, 165) - (338, 240)
[Sun May  6 20:37:04 2012] XMMSAS bgd. selection expression = annulus(26089.084595, 17545.433960, 1087.500000, 2175.000000, X, Y) && !ellipse(25419.072000, 20053.460000, 492.078414, 492.078414, 0.000000, X, Y) && !ellipse(24387.048859, 20559.618362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.326600, 19927.882800, 410.374412, 410.374412, 0.000000, X, Y) && !ellipse(26445.827606, 18233.459579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24376.611938, 18274.503677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25124.793884, 18036.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26359.241791, 17033.495193, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  6 20:37:04 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src78.gif
[Sun May  6 23:11:25 2012] Mean detx,y = (-3150.88, -6584.03) 
[Sun May  6 23:11:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 23:12:12 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 23:12:13 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sun May  6 23:12:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Mon May  7 03:53:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 03:53:38 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:33 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:33 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Mon May  7 15:15:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:46 2012] Using photon index=1.80, rate=0.00624, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src78.arf
[Mon May  7 15:15:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:46 2012] Updating source flux to 2.8e-14
[Mon May  7 15:32:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting