[Thu May  3 13:40:49 2012] Detection parameters:
  Position = (419.8, 289.8) = 20 32 21.48 41 19 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.1 +/- 25.6
  Background counts = 195.6
  Rate = 0.005 +/- 0.0009

[Thu May  3 13:40:58 2012] Off-axis axis estimate = 8.82'
[Thu May  3 13:49:11 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Thu May  3 13:49:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Thu May  3 13:49:11 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 10.84"
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src51.ximg exists
[Fri May  4 19:18:29 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src51.csv
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src51_1.ximg exists
[Fri May  4 19:18:29 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src51.csv
[Fri May  4 19:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 19:18:31 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Fri May  4 19:18:31 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Fri May  4 19:18:31 2012] Fit fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat May  5 14:41:20 2012] Source 55 is offset by -7.214429 and 3.835864 pixels which is larger than
2 X fitted extent = 1.245756 x 1.245756, not incorporating fit results
[Sat May  5 14:41:20 2012] Spatial fit model total counts = 694.049000, observed total counts = 691.000000
[Sat May  5 14:41:20 2012] Offset between fit and detection position for source 55 = 0.856383 pixels
[Sat May  5 14:41:20 2012] Warning, changing simple spatial fit ID from 51 to 49
[Sat May  5 14:41:20 2012] 703.396000 total counts/ 542.002000 bgd. counts: snr = 6.932453
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.856383 pixels
  Position = (418.9, 289.8) = 20 32 21.82 41 19 20.3
  Extent = 20.7 (18.8-21.6)", rotation angle = 0
  Source counts = 161.4 +/- 26.5
  Background counts = 542.0
  Rate = 0.01 +/- 0.002
[Sat May  5 14:41:21 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:21 2012] Assessing source extent using major axis lower bound
[Sat May  5 14:41:21 2012] Source does appear to be extended
[Sat May  5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:41:21 2012] Source is confused with source 53
[Sat May  5 14:43:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  5 14:43:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 20.66"
[Sat May  5 14:43:04 2012] source mask rpix=4.7, npix_max = 110, mask sum = 100, frac = 0.908
[Sat May  5 14:43:04 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 20.66"
[Sun May  6 06:51:22 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src47.ximg exists
[Sun May  6 06:51:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src47.csv
[Sun May  6 06:51:22 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun May  6 06:51:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src47.csv
[Sun May  6 06:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 06:51:26 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun May  6 06:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun May  6 06:51:26 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun May  6 06:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun May  6 06:51:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:35:32 2012] Warning, spatial fit 47 centroid is now closest to src. 1
[Sun May  6 20:35:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:33 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:35:33 2012] Source does appear to be extended
[Sun May  6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:37:02 2012] XMMSAS src. selection expression = ellipse(36395.385560, 25164.406000, 1239.390036, 1239.390036, 0.000000, X, Y)
[Sun May  6 20:37:02 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src55_src.reg
[Sun May  6 20:37:02 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (348, 219) - (490, 361)
[Sun May  6 20:37:02 2012] XMMSAS bgd. selection expression = annulus(36395.385560, 25164.406000, 2065.650059, 4131.300119, X, Y) && !ellipse(36302.923889, 23891.362854, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(36384.372223, 25866.728546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37486.076630, 23520.609253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35738.565000, 21694.085400, 452.794328, 452.794328, 0.000000, X, Y)
[Sun May  6 20:37:02 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src55.gif
[Sun May  6 22:47:06 2012] Mean detx,y = (-11541.08, 2411.58) 
[Sun May  6 22:47:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 22:48:34 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 22:48:35 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun May  6 22:48:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon May  7 15:15:31 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:31 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon May  7 15:15:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:44 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src55.arf
[Mon May  7 15:15:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:44 2012] Updating source flux to 6.1e-14
[Mon May  7 15:32:00 2012] Flag b found in src. 55 procflags, skipping spectral fitting
[Mon May  7 15:32:00 2012] Flag c found in src. 55 procflags, skipping spectral fitting