[Thu May  3 13:40:46 2012] Detection parameters:
  Position = (142.2, 325.8) = 20 34 8.69 41 21 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.3 +/- 21.7
  Background counts = 156.2
  Rate = 0.005 +/- 0.0007

[Thu May  3 13:40:58 2012] Off-axis axis estimate = 11.50'
[Thu May  3 13:49:11 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Thu May  3 13:49:11 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.964
[Thu May  3 13:49:11 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 12.18"
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src38.ximg exists
[Fri May  4 19:18:29 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src38.csv
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri May  4 19:18:29 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src38.csv
[Fri May  4 19:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 19:18:31 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri May  4 19:18:31 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri May  4 19:18:31 2012] Fit fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sat May  5 14:41:20 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 14.558313 pixels away
[Sat May  5 14:41:21 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:21 2012] Assessing source extent using major
[Sat May  5 14:41:21 2012] Source does appear to be extended
[Sat May  5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:43:04 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Sat May  5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Sat May  5 14:43:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.964
[Sat May  5 14:43:04 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 12.18"
[Sun May  6 06:51:22 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src37.ximg exists
[Sun May  6 06:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src37.csv
[Sun May  6 06:51:22 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun May  6 06:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src37.csv
[Sun May  6 06:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 06:51:26 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun May  6 06:51:26 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun May  6 06:51:26 2012] Fit fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sun May  6 20:35:32 2012] Spatial fit model total counts = 768.898000, observed total counts = 765.000000
[Sun May  6 20:35:32 2012] Offset between fit and detection position for source 42 = 0.168804 pixels
[Sun May  6 20:35:32 2012] 768.913100 total counts/ 691.538000 bgd. counts: snr = 2.942342
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.168804 pixels
  Position = (142.3, 325.7) = 20 34 8.67 41 21 55.9
  Extent = 5.2 (4.2-7.0)", rotation angle = 0
  Source counts = 77.4 +/- 27.7
  Background counts = 691.5
  Rate = 0.006 +/- 0.002
[Sun May  6 20:35:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:33 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:35:33 2012] Source does appear to be extended
[Sun May  6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:37:02 2012] XMMSAS src. selection expression = ellipse(12329.966480, 28285.248800, 313.672809, 313.672809, 0.000000, X, Y)
[Sun May  6 20:37:02 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src42_src.reg
[Sun May  6 20:37:02 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (124, 308) - (160, 344)
[Sun May  6 20:37:02 2012] XMMSAS bgd. selection expression = annulus(12329.966480, 28285.248800, 522.788015, 1045.576030, X, Y)
[Sun May  6 20:37:02 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src42.gif
[Sun May  6 22:36:54 2012] Mean detx,y = (12706.82, 629.11) 
[Sun May  6 22:36:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 22:37:24 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 22:37:25 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun May  6 22:37:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon May  7 02:32:48 2012] Not generating rmf since there are only 77 counts
[Mon May  7 02:32:48 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:30 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:30 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon May  7 15:15:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:43 2012] Using photon index=1.80, rate=0.0057, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src42.arf
[Mon May  7 15:15:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:43 2012] Updating source flux to 3.5e-14
[Mon May  7 15:32:00 2012] Source 42 has fewer than 100.000000 counts, skipping spectral fitting