[Thu May  3 13:40:44 2012] Detection parameters:
  Position = (310.6, 399.1) = 20 33 3.63 41 27 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.4 +/- 25.2
  Background counts = 191.4
  Rate = 0.01 +/- 0.002

[Thu May  3 13:40:58 2012] Off-axis axis estimate = 7.35'
[Thu May  3 13:49:11 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Thu May  3 13:49:11 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Thu May  3 13:49:11 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.10"
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src29.ximg exists
[Fri May  4 19:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src29.csv
[Fri May  4 19:18:29 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri May  4 19:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src29.csv
[Fri May  4 19:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 19:18:31 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri May  4 19:18:31 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri May  4 19:18:31 2012] Fit fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat May  5 14:41:20 2012] Spatial fit model total counts = 618.900000, observed total counts = 618.000000
[Sat May  5 14:41:20 2012] Offset between fit and detection position for source 33 = 0.392229 pixels
[Sat May  5 14:41:20 2012] Warning, changing simple spatial fit ID from 29 to 28
[Sat May  5 14:41:20 2012] 584.666200 total counts/ 510.422000 bgd. counts: snr = 3.286229
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.392229 pixels
  Position = (310.3, 398.8) = 20 33 3.72 41 27 14.8
  Extent = 5.8 (4.0-8.6)", rotation angle = 0
  Source counts = 74.2 +/- 24.2
  Background counts = 510.4
  Rate = 0.005 +/- 0.002
[Sat May  5 14:41:21 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:21 2012] Assessing source extent using major axis lower bound
[Sat May  5 14:41:21 2012] Source does appear to be extended
[Sat May  5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:41:21 2012] Source is confused with source 32
[Sat May  5 14:41:21 2012] Source is confused with source 35
[Sat May  5 14:43:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Sat May  5 14:43:04 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.896
[Sat May  5 14:43:04 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 5.78"
[Sun May  6 06:51:22 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src29.ximg exists
[Sun May  6 06:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src29.csv
[Sun May  6 06:51:22 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May  6 06:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src29.csv
[Sun May  6 06:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 06:51:25 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May  6 06:51:25 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May  6 06:51:25 2012] Fit fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun May  6 20:35:32 2012] Spatial fit model total counts = 822.847000, observed total counts = 822.000000
[Sun May  6 20:35:32 2012] Offset between fit and detection position for source 33 = 0.290748 pixels
[Sun May  6 20:35:32 2012] Warning, changing simple spatial fit ID from 29 to 28
[Sun May  6 20:35:32 2012] 814.538000 total counts/ 703.912000 bgd. counts: snr = 4.169635
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.290748 pixels
  Position = (310.2, 399.0) = 20 33 3.79 41 27 15.8
  Extent = 7.3 (4.9-10.2)", rotation angle = 0
  Source counts = 110.6 +/- 28.5
  Background counts = 703.9
  Rate = 0.008 +/- 0.002
[Sun May  6 20:35:32 2012] Spatial fit model total counts = 651.958000, observed total counts = 650.000000
[Sun May  6 20:35:32 2012] Offset between fit and detection position for source 33 = 0.235859 pixels
[Sun May  6 20:35:32 2012] Warning, changing simple spatial fit ID from 28 to 29
[Sun May  6 20:35:32 2012] 569.591000 total counts/ 485.045000 bgd. counts: snr = 3.838858
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.235859 pixels
  Position = (310.3, 399.2) = 20 33 3.75 41 27 16.7
  Extent = 6.0 (4.0-8.0)", rotation angle = 0
  Source counts = 84.5 +/- 23.9
  Background counts = 485.0
  Rate = 0.006 +/- 0.002
[Sun May  6 20:35:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:33 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:35:33 2012] Source does appear to be extended
[Sun May  6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:37:01 2012] XMMSAS src. selection expression = ellipse(26945.918600, 34681.977000, 358.014610, 358.014610, 0.000000, X, Y)
[Sun May  6 20:37:01 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src33_src.reg
[Sun May  6 20:37:01 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (290, 379) - (331, 420)
[Sun May  6 20:37:01 2012] XMMSAS bgd. selection expression = annulus(26945.918600, 34681.977000, 596.691017, 1193.382034, X, Y) && !ellipse(27103.603149, 35796.118622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27096.321400, 35256.784000, 1692.024049, 1692.024049, 0.000000, X, Y) && !ellipse(26501.884000, 33503.152000, 1281.352037, 1281.352037, 0.000000, X, Y)
[Sun May  6 20:37:01 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src33.gif
[Sun May  6 22:25:53 2012] Mean detx,y = (-28.69, 10221.80) 
[Sun May  6 22:25:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 22:26:27 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 22:26:28 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May  6 22:26:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon May  7 02:18:16 2012] Not generating rmf since there are only 84 counts
[Mon May  7 02:18:16 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:30 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:30 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon May  7 15:15:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:43 2012] Using photon index=1.80, rate=0.00623, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src33.arf
[Mon May  7 15:15:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:43 2012] Getting flux using calc_pl_flux failed
[Mon May  7 15:32:00 2012] Flag c found in src. 33 procflags, skipping spectral fitting
[Mon May  7 15:32:00 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting