[Thu May  3 13:40:38 2012] Detection parameters:
  Position = (369.7, 222.8) = 20 32 40.86 41 14 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5742.9 +/- 91.7
  Background counts = 175.5
  Rate = 0.2 +/- 0.003

[Thu May  3 13:40:58 2012] Off-axis axis estimate = 7.53'
[Thu May  3 13:49:11 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Thu May  3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Thu May  3 13:49:11 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Thu May  3 13:49:11 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.20"
[Fri May  4 19:18:28 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src2.ximg exists
[Fri May  4 19:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src2.csv
[Fri May  4 19:18:28 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May  4 19:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src2.csv
[Fri May  4 19:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 19:18:30 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May  4 19:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May  4 19:18:30 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May  4 19:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May  4 19:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:41:20 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.634817 pixels away
[Sat May  5 14:41:21 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:41:21 2012] Assessing source extent using major
[Sat May  5 14:41:21 2012] Source does appear to be extended
[Sat May  5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:43:04 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Sat May  5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Sat May  5 14:43:04 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Sat May  5 14:43:04 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.20"
[Sun May  6 06:51:20 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src2.ximg exists
[Sun May  6 06:51:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src2.csv
[Sun May  6 06:51:20 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May  6 06:51:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src2.csv
[Sun May  6 06:51:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 06:51:24 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May  6 06:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  6 06:51:24 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May  6 06:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  6 06:51:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:35:31 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.589310 pixels away
[Sun May  6 20:35:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:35:33 2012] Assessing source extent using major
[Sun May  6 20:35:33 2012] Source does appear to be extended
[Sun May  6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:36:53 2012] Counts = 5742.940430, rescaling region sizes by 2.000000
[Sun May  6 20:36:53 2012] XMMSAS src. selection expression = ellipse(32112.570801, 19333.363876, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May  6 20:36:53 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src2_src.reg
[Sun May  6 20:36:53 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (295, 148) - (445, 298)
[Sun May  6 20:36:53 2012] XMMSAS bgd. selection expression = annulus(32112.570801, 19333.363876, 4350.000000, 8700.000000, X, Y) && !ellipse(36302.923889, 23891.362854, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24416.570980, 24529.705000, 1433.133641, 1433.133641, 0.000000, X, Y) && !ellipse(25419.072000, 20053.460000, 492.078414, 492.078414, 0.000000, X, Y) && !ellipse(32906.586517, 10725.208641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27566.029602, 10582.560555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.781464, 10073.504486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34185.997345, 9877.277908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24599.569800, 27673.406000, 1549.144045, 689.138420, 359.970000, X, Y) && !ellipse(28349.860000, 27520.559800, 482.899257, 482.899257, 0.000000, X, Y) && !ellipse(24646.610000, 26958.818000, 849.984024, 849.984024, 0.000000, X, Y) && !ellipse(23758.855652, 26317.608276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.918200, 26361.158400, 408.085612, 408.085612, 0.000000, X, Y) && !ellipse(36384.372223, 25866.728546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.660858, 25498.319336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36395.385560, 25164.406000, 1652.520048, 1652.520048, 0.000000, X, Y) && !ellipse(37486.076630, 23520.609253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24451.961670, 23241.541779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23944.126251, 23356.525787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22788.524750, 23246.942108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.961212, 22740.630676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23941.295990, 22389.253479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35738.565000, 21694.085400, 452.794328, 452.794328, 0.000000, X, Y) && !ellipse(24848.800934, 20721.268494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.048859, 20559.618362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.326600, 19927.882800, 410.374412, 410.374412, 0.000000, X, Y) && !ellipse(34342.163513, 18935.878113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34068.063599, 18807.974731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.827606, 18233.459579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24376.611938, 18274.503677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25124.793884, 18036.907761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26089.084595, 17545.433960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26359.241791, 17033.495193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22611.264374, 16758.744797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.779266, 14152.826904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32143.518000, 13791.537600, 1962.128056, 645.596019, 0.000000, X, Y) && !ellipse(30918.813873, 14032.008469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30357.076050, 13979.619431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29267.470612, 13602.033112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32662.098145, 13644.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28731.090973, 13264.103638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28209.444092, 12817.914017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34213.376000, 12447.597200, 2075.480060, 259.435207, 47.746300, X, Y) && !ellipse(34600.619995, 12071.052948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31133.156400, 11734.296000, 649.399219, 649.399219, 0.000000, X, Y) && !ellipse(30131.998000, 11952.260000, 910.920026, 910.920026, 0.000000, X, Y) && !ellipse(31704.174194, 11585.637924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35117.774567, 11335.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29828.940000, 11866.414000, 1063.576031, 1063.576031, 0.000000, X, Y) && !ellipse(30207.146545, 10741.916740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.482819, 11174.092453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36190.642700, 11235.511246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.201080, 10911.518684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30638.312683, 10906.809326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32918.770447, 10983.745438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28829.443878, 11072.396202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31374.531067, 10651.107437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31803.986000, 10674.570000, 621.740818, 621.740818, 0.000000, X, Y) && !ellipse(30963.974000, 10728.170000, 507.759215, 507.759215, 0.000000, X, Y) && !ellipse(35483.178000, 10480.446000, 765.843222, 765.843222, 0.000000, X, Y) && !ellipse(28126.705414, 10028.993584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30148.481018, 10040.003990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35146.671906, 9870.647636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.905304, 10397.843529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33070.083221, 10219.458084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.276000, 9629.468000, 1100.608032, 1100.608032, 0.000000, X, Y)
[Sun May  6 20:36:53 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src2.gif
[Sun May  6 20:52:13 2012] Mean detx,y = (-8665.95, -3480.60) 
[Sun May  6 20:52:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 20:56:56 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 20:56:57 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May  6 20:56:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May  7 00:36:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 00:36:43 2012] rmf not generated due to insufficient counts
[Mon May  7 15:15:26 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:26 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May  7 15:15:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:15:40 2012] Using photon index=1.80, rate=0.194, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src2.arf
[Mon May  7 15:15:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:15:40 2012] Updating source flux to 8.3e-13
[Mon May  7 15:32:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May  7 15:41:15 2012] xmm0505110401/analysis//spectral/fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete