[Thu May 3 13:40:58 2012] Detection parameters: Position = (397.2, 87.9) = 20 32 30.34 41 4 42.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1120.2 +/- 48.5 Background counts = 77.9 Rate = 0.04 +/- 0.002 [Thu May 3 13:40:58 2012] Off-axis axis estimate = 16.86' [Thu May 3 13:49:11 2012] Using EEF radius (= 14.86 ")to estimate initial spatial extent for simple fitting [Thu May 3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 14.86" [Thu May 3 13:49:11 2012] source mask rpix=3.4, npix_max = 61, mask sum = 63, frac = 1.027 [Thu May 3 13:49:11 2012] Giving source the simple spatial ID 128 for pass 0, mean size = 14.86" [Sat May 5 14:41:20 2012] Source 133 is offset by 3.872542 and -2.416787 pixels which is larger than 2 X fitted extent = 1.724681 x 1.724681, not incorporating fit results [Sat May 5 14:41:21 2012] Vigneting correction estimate = 1.000000 [Sat May 5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 5 14:41:21 2012] Assessing source extent using major [Sat May 5 14:41:21 2012] Source does appear to be extended [Sat May 5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 14:41:21 2012] Source is confused with source 22 [Sat May 5 14:43:04 2012] Using EEF radius (= 14.86 ")to estimate initial spatial extent for simple fitting [Sat May 5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 14.86" [Sat May 5 14:43:04 2012] source mask rpix=3.4, npix_max = 61, mask sum = 63, frac = 1.027 [Sat May 5 14:43:04 2012] Giving source the simple spatial ID 121 for pass 1, mean size = 14.86" [Sun May 6 20:35:31 2012] Source 133 is offset by -6.733835 and -3.263668 pixels which is larger than 2 X fitted extent = 4.127577 x 4.127577, not incorporating fit results [Sun May 6 20:35:33 2012] Vigneting correction estimate = 1.000000 [Sun May 6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 20:35:33 2012] Assessing source extent using major [Sun May 6 20:35:33 2012] Source does appear to be extended [Sun May 6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 20:37:11 2012] Counts = 1120.161987, rescaling region sizes by 2.000000 [Sun May 6 20:37:11 2012] XMMSAS src. selection expression = ellipse(34505.291168, 7597.119499, 1305.000000, 1305.000000, 0.000000, X, Y) [Sun May 6 20:37:11 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src133_src.reg [Sun May 6 20:37:11 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (322, 13) - (472, 163) [Sun May 6 20:37:11 2012] XMMSAS bgd. selection expression = annulus(34505.291168, 7597.119499, 4350.000000, 8700.000000, X, Y) && !ellipse(31570.684631, 6847.018631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28466.211975, 8374.105194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.248627, 7883.879921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.307648, 7207.122910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30445.007965, 6427.055389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30093.195343, 7238.532570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32957.422363, 6574.783211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32906.586517, 10725.208641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27566.029602, 10582.560555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.781464, 10073.504486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34185.997345, 9877.277908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28620.033752, 8975.732178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30963.938751, 8810.998230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34663.185760, 8732.192314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.107330, 8713.695389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33389.642548, 8657.935791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32333.673676, 7593.867752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35061.609160, 7926.475000, 739.991221, 739.991221, 0.000000, X, Y) && !ellipse(31588.653834, 7821.239841, 1479.984043, 709.322577, 57.385148, X, Y) && !ellipse(31158.066528, 7959.258858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33157.784149, 7006.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32310.123566, 6415.927498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26359.241791, 17033.495193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29109.868073, 6851.930435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.779266, 14152.826904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32143.518000, 13791.537600, 1962.128056, 645.596019, 0.000000, X, Y) && !ellipse(30918.813873, 14032.008469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30357.076050, 13979.619431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29267.470612, 13602.033112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32662.098145, 13644.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28731.090973, 13264.103638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28209.444092, 12817.914017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34213.376000, 12447.597200, 2075.480060, 259.435207, 47.746300, X, Y) && !ellipse(34600.619995, 12071.052948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31133.156400, 11734.296000, 649.399219, 649.399219, 0.000000, X, Y) && !ellipse(30131.998000, 11952.260000, 910.920026, 910.920026, 0.000000, X, Y) && !ellipse(31704.174194, 11585.637924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35117.774567, 11335.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29828.940000, 11866.414000, 1063.576031, 1063.576031, 0.000000, X, Y) && !ellipse(30207.146545, 10741.916740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.482819, 11174.092453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36190.642700, 11235.511246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.201080, 10911.518684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30638.312683, 10906.809326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32918.770447, 10983.745438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28829.443878, 11072.396202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31374.531067, 10651.107437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31803.986000, 10674.570000, 621.740818, 621.740818, 0.000000, X, Y) && !ellipse(30963.974000, 10728.170000, 507.759215, 507.759215, 0.000000, X, Y) && !ellipse(35483.178000, 10480.446000, 765.843222, 765.843222, 0.000000, X, Y) && !ellipse(28126.705414, 10028.993584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30148.481018, 10040.003990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35146.671906, 9870.647636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.905304, 10397.843529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33070.083221, 10219.458084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35832.216400, 9695.510620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31525.705780, 9703.390083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.276000, 9629.468000, 1100.608032, 1100.608032, 0.000000, X, Y) && !ellipse(34131.836000, 9400.708000, 375.152811, 375.152811, 0.000000, X, Y) && !ellipse(31590.034485, 9097.116798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36091.564972, 9003.439400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30569.913818, 9528.670570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32707.000000, 8390.191353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32112.934540, 8493.225075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36207.799500, 8647.846016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.471283, 8390.024750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30536.561340, 8383.780785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.036652, 8024.348228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.653961, 7781.940071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29491.451538, 7516.896461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28952.775299, 7258.449936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.446442, 7072.440575, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 6 20:37:11 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src133.gif [Mon May 7 00:23:33 2012] Mean detx,y = (-13571.16, -13971.23) [Mon May 7 00:23:40 2012] Setting backscal keywords in source and bgd. spectrum [Mon May 7 00:26:22 2012] Binned source spectrum to 10 counts/bin [Mon May 7 00:26:27 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src133_src_b10.pi.gz [Mon May 7 00:26:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src133_bgd.pi.gz [Mon May 7 05:13:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 7 05:13:17 2012] rmf not generated due to insufficient counts [Mon May 7 15:15:39 2012] Updating aperture counts using extracted products [Mon May 7 15:15:39 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src133_src_b10.pi.gz [Mon May 7 15:15:51 2012] Calculating source flux in energy range 0.30-8.00 [Mon May 7 15:15:51 2012] Using photon index=1.80, rate=0.0378, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src133.arf [Mon May 7 15:15:51 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 7 15:15:51 2012] Updating source flux to 4e-13 [Mon May 7 15:32:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting