[Thu May 3 13:40:54 2012] Detection parameters: Position = (404.2, 130.9) = 20 32 27.60 41 7 50.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 286.9 +/- 26.9 Background counts = 106.9 Rate = 0.01 +/- 0.0009 [Thu May 3 13:40:58 2012] Off-axis axis estimate = 14.37' [Thu May 3 13:49:11 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting [Thu May 3 13:49:11 2012] Initial guess for spatial extent in simple fitting = 13.61" [Thu May 3 13:49:11 2012] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.892 [Thu May 3 13:49:11 2012] Giving source the simple spatial ID 95 for pass 0, mean size = 13.61" [Fri May 4 19:18:30 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src95.ximg exists [Fri May 4 19:18:30 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src95_1.ximg exists [Fri May 4 19:18:30 2012] Fit fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_src95 appears to have run properly [Fri May 4 19:18:32 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src95.ximg exists [Fri May 4 19:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src95.csv [Fri May 4 19:18:32 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists [Fri May 4 19:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src95.csv [Fri May 4 19:18:32 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src95_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 5 14:41:21 2012] Source 100 is offset by -5.963028 and -0.926699 pixels which is larger than 2 X fitted extent = 2.201858 x 2.201858, not incorporating fit results [Sat May 5 14:41:21 2012] Warning, spatial fit 95 centroid is now closest to src. 93 [Sat May 5 14:41:21 2012] Vigneting correction estimate = 1.000000 [Sat May 5 14:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 5 14:41:21 2012] Assessing source extent using major [Sat May 5 14:41:21 2012] Source does appear to be extended [Sat May 5 14:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 14:41:21 2012] Source is confused with source 105 [Sat May 5 14:43:04 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting [Sat May 5 14:43:04 2012] Initial guess for spatial extent in simple fitting = 13.61" [Sat May 5 14:43:04 2012] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.892 [Sat May 5 14:43:04 2012] Giving source the simple spatial ID 89 for pass 1, mean size = 13.61" [Sun May 6 06:51:24 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src89.ximg exists [Sun May 6 06:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src89.csv [Sun May 6 06:51:24 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src89_1.ximg exists [Sun May 6 06:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src89.csv [Sun May 6 06:51:24 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src89_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 06:51:27 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src89.ximg exists [Sun May 6 06:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src89.csv [Sun May 6 06:51:27 2012] fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists [Sun May 6 06:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src89.csv [Sun May 6 06:51:27 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src89_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 20:35:33 2012] Spatial fit model total counts = 1060.450000, observed total counts = 922.000000 [Sun May 6 20:35:33 2012] Poor agreement between spatial fit and data for source 100 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 6 20:35:33 2012] Warning, spatial fit 89 centroid is now closest to src. 113 [Sun May 6 20:35:33 2012] Spatial fit model total counts = 1954.360000, observed total counts = 1740.000000 [Sun May 6 20:35:33 2012] Poor agreement between spatial fit and data for source 100 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 6 20:35:33 2012] Vigneting correction estimate = 1.000000 [Sun May 6 20:35:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 20:35:33 2012] Assessing source extent using major [Sun May 6 20:35:33 2012] Source does appear to be extended [Sun May 6 20:35:33 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 20:37:07 2012] XMMSAS src. selection expression = ellipse(35117.774567, 11335.607178, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 6 20:37:07 2012] Writing source region out to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src100_src.reg [Sun May 6 20:37:07 2012] Extracting stamp from image fullrun_pn_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (367, 93) - (442, 168) [Sun May 6 20:37:07 2012] XMMSAS bgd. selection expression = annulus(35117.774567, 11335.607178, 1087.500000, 2175.000000, X, Y) && !ellipse(32906.586517, 10725.208641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34185.997345, 9877.277908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34663.185760, 8732.192314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33389.642548, 8657.935791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31588.653834, 7821.239841, 1479.984043, 709.322577, 57.385148, X, Y) && !ellipse(32143.518000, 13791.537600, 1962.128056, 645.596019, 0.000000, X, Y) && !ellipse(32662.098145, 13644.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34213.376000, 12447.597200, 2075.480060, 259.435207, 47.746300, X, Y) && !ellipse(34600.619995, 12071.052948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36190.642700, 11235.511246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.201080, 10911.518684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32918.770447, 10983.745438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35483.178000, 10480.446000, 765.843222, 765.843222, 0.000000, X, Y) && !ellipse(35146.671906, 9870.647636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33070.083221, 10219.458084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35832.216400, 9695.510620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34131.836000, 9400.708000, 375.152811, 375.152811, 0.000000, X, Y) && !ellipse(36091.564972, 9003.439400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32707.000000, 8390.191353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32112.934540, 8493.225075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36207.799500, 8647.846016, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 6 20:37:07 2012] Writing fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src100.gif [Sun May 6 23:41:34 2012] Mean detx,y = (-13466.39, -10683.65) [Sun May 6 23:41:39 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 6 23:42:16 2012] Binned source spectrum to 10 counts/bin [Sun May 6 23:42:17 2012] Setting source spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src100_src_b10.pi.gz [Sun May 6 23:42:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src100_bgd.pi.gz [Mon May 7 04:29:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 7 04:29:45 2012] rmf not generated due to insufficient counts [Mon May 7 15:15:36 2012] Updating aperture counts using extracted products [Mon May 7 15:15:36 2012] Error reading totcts from fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src100_src_b10.pi.gz [Mon May 7 15:15:48 2012] Calculating source flux in energy range 0.30-8.00 [Mon May 7 15:15:48 2012] Using photon index=1.80, rate=0.00967, arf fullrun_pn_xmm0505110401_pi300-10000_pass1_cl_src100.arf [Mon May 7 15:15:48 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 7 15:15:48 2012] Updating source flux to 8.8e-14 [Mon May 7 15:32:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting