[Thu May  3 13:41:13 2012] Detection parameters:
  Position = (265.5, 280.0) = 20 33 21.03 41 18 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.8 +/- 19.4
  Background counts = 87.3
  Rate = 0.003 +/- 0.0007

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 2.73'
[Sat May  5 03:26:58 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Sat May  5 03:26:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.952
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 7.80"
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src75.ximg exists
[Sat May  5 14:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src75.csv
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src75_1.ximg exists
[Sat May  5 14:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src75.csv
[Sat May  5 14:40:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:32 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Sat May  5 14:40:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src75.csv
[Sat May  5 14:40:32 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Sat May  5 14:40:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src75.csv
[Sat May  5 14:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:42:13 2012] Spatial fit model total counts = 2256.590000, observed total counts = 2111.000000
[Sat May  5 14:42:13 2012] Offset between fit and detection position for source 75 = 2.505735 pixels
[Sat May  5 14:42:13 2012] Warning, changing simple spatial fit ID from 75 to 63
[Sat May  5 14:42:13 2012] 2545.220000 total counts/ 1485.060000 bgd. counts: snr = 27.510559
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 2.505735 pixels
  Position = (264.3, 282.1) = 20 33 21.53 41 18 47.3
  Extent = 13.1 (13.1-13.1)", rotation angle = 0
  Source counts = 1060.2 +/- 50.5
  Background counts = 1485.1
  Rate = 0.04 +/- 0.002
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major axis lower bound
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:42:13 2012] Source is confused with source 73
[Sun May  6 09:51:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Sun May  6 09:51:23 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 13.06"
[Sun May  6 20:34:48 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src68.ximg exists
[Sun May  6 20:34:48 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src68_1.ximg exists
[Sun May  6 20:34:48 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src68 appears to have run properly
[Sun May  6 20:34:52 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sun May  6 20:34:52 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sun May  6 20:34:52 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Sun May  6 20:36:11 2012] Warning, spatial fit 68 centroid is now closest to src. 73
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:46:08 2012] Counts = 1060.160000, rescaling region sizes by 2.000000
[Mon May  7 07:46:08 2012] XMMSAS src. selection expression = ellipse(22941.298000, 24494.188000, 1566.984045, 1566.984045, 0.000000, X, Y)
[Mon May  7 07:46:08 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src75_src.reg
[Mon May  7 07:46:08 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (174, 192) - (354, 372)
[Mon May  7 07:46:08 2012] XMMSAS bgd. selection expression = annulus(22941.298000, 24494.188000, 5223.280150, 10446.560301, X, Y) && !ellipse(24428.601200, 24526.853600, 1301.203237, 1301.203237, 0.000000, X, Y) && !ellipse(25406.480800, 20083.846000, 366.394411, 366.394411, 0.000000, X, Y) && !ellipse(32143.958557, 19283.667038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.371726, 14330.521107, 256.208961, 229.636007, -0.000000, X, Y) && !ellipse(21870.981140, 17103.213608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.528400, 26354.319600, 391.300811, 391.300811, 0.000000, X, Y) && !ellipse(30875.908600, 14434.335600, 1346.848039, 301.747209, 21.501675, X, Y) && !ellipse(25852.024994, 17905.185120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32291.380000, 14111.194000, 613.108818, 613.108818, 0.000000, X, Y) && !ellipse(32581.356049, 13715.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19005.877960, 19570.491180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26846.468872, 31545.560089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33018.076000, 12223.730000, 2099.728060, 2099.728060, 0.000000, X, Y) && !ellipse(24622.390656, 26976.435211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18008.042282, 30421.935760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14645.545600, 31718.499200, 482.822414, 482.822414, 0.000000, X, Y) && !ellipse(17097.699112, 15250.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25014.259705, 19994.407761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.551200, 23968.339800, 339.540010, 339.540010, 0.000000, X, Y) && !ellipse(27093.004272, 34637.458527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28379.450928, 27447.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22825.642059, 23177.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14704.755722, 27055.369232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.886000, 24647.087600, 2089.312060, 2089.312060, 0.000000, X, Y) && !ellipse(24857.312958, 20723.567749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.188812, 22326.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13628.270111, 30203.798553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27558.916779, 35150.641174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21006.274360, 21332.478600, 469.577691, 469.577691, 0.000000, X, Y) && !ellipse(14552.780518, 34454.067688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23584.545013, 22836.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.346130, 14130.698563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.650700, 14504.059000, 635.086418, 366.849611, 0.000000, X, Y) && !ellipse(23813.514740, 27794.399292, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 07:46:08 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src75.gif
[Mon May  7 09:42:26 2012] Mean detx,y = (-249.81, 169.94) 
[Mon May  7 09:42:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 09:51:44 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 09:51:44 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Mon May  7 09:51:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Mon May  7 15:16:04 2012] Updating aperture counts using extracted products
[Mon May  7 15:16:04 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Mon May  7 15:16:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:10 2012] Using photon index=1.80, rate=0.0397, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src75.arf
[Mon May  7 15:16:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:10 2012] Updating source flux to 3.6e-13
[Mon May  7 15:21:24 2012] Flag c found in src. 75 procflags, skipping spectral fitting