[Thu May  3 13:41:13 2012] Detection parameters:
  Position = (271.6, 287.0) = 20 33 18.69 41 19 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.2 +/- 21.2
  Background counts = 88.5
  Rate = 0.005 +/- 0.0008

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 2.11'
[Sat May  5 03:26:58 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Sat May  5 03:26:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.862
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.49"
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src63.ximg exists
[Sat May  5 14:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src63.csv
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat May  5 14:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src63.csv
[Sat May  5 14:40:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:32 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat May  5 14:40:32 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat May  5 14:40:32 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sat May  5 14:42:13 2012] Warning, spatial fit 63 centroid is now closest to src. 75
[Sat May  5 14:42:13 2012] Source 73 is offset by -0.555806 and -1.143299 pixels which is larger than
2 X fitted extent = 0.896097 x 0.896097, not incorporating fit results
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:42:13 2012] Source is confused with source 75
[Sun May  6 09:51:23 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Sun May  6 09:51:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.862
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 7.49"
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src59.ximg exists
[Sun May  6 20:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src59.csv
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun May  6 20:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src59.csv
[Sun May  6 20:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:34:52 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun May  6 20:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sun May  6 20:34:52 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun May  6 20:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sun May  6 20:34:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:36:11 2012] Spatial fit model total counts = 196.691000, observed total counts = 2111.000000
[Sun May  6 20:36:11 2012] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 20:36:11 2012] Spatial fit model total counts = 1270.800000, observed total counts = 1245.000000
[Sun May  6 20:36:11 2012] Offset between fit and detection position for source 73 = 3.548513 pixels
[Sun May  6 20:36:11 2012] Warning, changing simple spatial fit ID from 59 to 68
[Sun May  6 20:36:11 2012] 1261.432000 total counts/ 895.217000 bgd. counts: snr = 12.239734
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 3.548513 pixels
  Position = (273.2, 283.9) = 20 33 18.07 41 18 55.0
  Extent = 26.1 (26.1-52.2)", rotation angle = 0
  Source counts = 366.2 +/- 35.5
  Background counts = 895.2
  Rate = 0.01 +/- 0.001
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:46:07 2012] XMMSAS src. selection expression = ellipse(23720.886000, 24647.087600, 1566.984045, 1566.984045, 0.000000, X, Y)
[Mon May  7 07:46:07 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src73_src.reg
[Mon May  7 07:46:07 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (183, 194) - (363, 374)
[Mon May  7 07:46:07 2012] XMMSAS bgd. selection expression = annulus(23720.886000, 24647.087600, 2611.640075, 5223.280150, X, Y) && !ellipse(24428.601200, 24526.853600, 1301.203237, 1301.203237, 0.000000, X, Y) && !ellipse(25406.480800, 20083.846000, 366.394411, 366.394411, 0.000000, X, Y) && !ellipse(24647.528400, 26354.319600, 391.300811, 391.300811, 0.000000, X, Y) && !ellipse(19005.877960, 19570.491180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.390656, 26976.435211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18008.042282, 30421.935760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25014.259705, 19994.407761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.551200, 23968.339800, 339.540010, 339.540010, 0.000000, X, Y) && !ellipse(28379.450928, 27447.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22825.642059, 23177.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24857.312958, 20723.567749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.188812, 22326.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21006.274360, 21332.478600, 469.577691, 469.577691, 0.000000, X, Y) && !ellipse(22941.298000, 24494.188000, 1044.656030, 1044.656030, 0.000000, X, Y) && !ellipse(23584.545013, 22836.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23813.514740, 27794.399292, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 07:46:07 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src73.gif
[Mon May  7 09:38:18 2012] Mean detx,y = (-27.60, 75.66) 
[Mon May  7 09:38:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 09:39:00 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 09:39:00 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Mon May  7 09:39:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Mon May  7 15:16:03 2012] Updating aperture counts using extracted products
[Mon May  7 15:16:03 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Mon May  7 15:16:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:10 2012] Using photon index=1.80, rate=0.0137, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src73.arf
[Mon May  7 15:16:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:10 2012] Updating source flux to 1.8e-13
[Mon May  7 15:21:24 2012] Flag b found in src. 73 procflags, skipping spectral fitting
[Mon May  7 15:21:24 2012] Flag p found in src. 73 procflags, skipping spectral fitting
[Mon May  7 15:21:24 2012] Flag c found in src. 73 procflags, skipping spectral fitting