[Thu May  3 13:41:12 2012] Detection parameters:
  Position = (168.9, 365.1) = 20 33 58.41 41 24 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.8 +/- 17.0
  Background counts = 52.9
  Rate = 0.007 +/- 0.001

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 10.56'
[Sat May  5 03:26:58 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Sat May  5 03:26:58 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 11.71"
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src55.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src55.csv
[Sat May  5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat May  5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src55.csv
[Sat May  5 14:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat May  5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat May  5 14:40:31 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sat May  5 14:42:13 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 12.537158 pixels away
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 09:51:23 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Sun May  6 09:51:23 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 11.71"
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src51.ximg exists
[Sun May  6 20:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src51.csv
[Sun May  6 20:34:47 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun May  6 20:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src51.csv
[Sun May  6 20:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:34:52 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun May  6 20:34:52 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun May  6 20:34:52 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun May  6 20:36:11 2012] Spatial fit model total counts = 414.001000, observed total counts = 414.000000
[Sun May  6 20:36:11 2012] Offset between fit and detection position for source 61 = 0.055357 pixels
[Sun May  6 20:36:11 2012] 415.226000 total counts/ 343.320000 bgd. counts: snr = 3.880749
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.055357 pixels
  Position = (168.9, 365.1) = 20 33 58.42 41 24 47.9
  Extent = 6.0 (4.4-8.2)", rotation angle = 0
  Source counts = 71.9 +/- 20.4
  Background counts = 343.3
  Rate = 0.003 +/- 0.0008
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:46:07 2012] XMMSAS src. selection expression = ellipse(14645.545600, 31718.499200, 362.116810, 362.116810, 0.000000, X, Y)
[Mon May  7 07:46:07 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src61_src.reg
[Mon May  7 07:46:07 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (148, 344) - (190, 386)
[Mon May  7 07:46:07 2012] XMMSAS bgd. selection expression = annulus(14645.545600, 31718.499200, 603.528017, 1207.056035, X, Y) && !ellipse(13628.270111, 30203.798553, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 07:46:07 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src61.gif
[Mon May  7 09:34:01 2012] Mean detx,y = (-11134.10, -4557.78) 
[Mon May  7 09:34:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 09:34:17 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 09:34:18 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Mon May  7 09:34:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Mon May  7 13:33:09 2012] Not generating rmf since there are only 71 counts
[Mon May  7 13:33:09 2012] rmf not generated due to insufficient counts
[Mon May  7 15:16:03 2012] Updating aperture counts using extracted products
[Mon May  7 15:16:03 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Mon May  7 15:16:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:09 2012] Using photon index=1.80, rate=0.00269, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src61.arf
[Mon May  7 15:16:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:09 2012] Updating source flux to 6.1e-14
[Mon May  7 15:21:24 2012] Source 61 has fewer than 100.000000 counts, skipping spectral fitting