[Thu May 3 13:41:10 2012] Detection parameters: Position = (323.3, 108.0) = 20 32 58.74 41 6 11.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 403.1 +/- 34.9 Background counts = 52.2 Rate = 0.01 +/- 0.001 [Thu May 3 13:41:15 2012] Off-axis axis estimate = 13.92' [Sat May 5 03:26:58 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting [Sat May 5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 13.39" [Sat May 5 03:26:58 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.094 [Sat May 5 03:26:58 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 13.39" [Sat May 5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src41.ximg exists [Sat May 5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src41.csv [Sat May 5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src41_1.ximg exists [Sat May 5 14:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src41.csv [Sat May 5 14:40:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists [Sat May 5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists [Sat May 5 14:40:31 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly [Sat May 5 14:42:13 2012] Warning, spatial fit 41 centroid is now closest to src. 2 [Sat May 5 14:42:13 2012] Vigneting correction estimate = 1.000000 [Sat May 5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 5 14:42:13 2012] Assessing source extent using major [Sat May 5 14:42:13 2012] Source does appear to be extended [Sat May 5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 14:42:13 2012] Source is confused with source 7 [Sun May 6 09:51:23 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting [Sun May 6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 13.39" [Sun May 6 09:51:23 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.094 [Sun May 6 09:51:23 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 13.39" [Sun May 6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src37.ximg exists [Sun May 6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src37.csv [Sun May 6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src37_1.ximg exists [Sun May 6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src37.csv [Sun May 6 20:34:46 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src37_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 20:34:51 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists [Sun May 6 20:34:51 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists [Sun May 6 20:34:51 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly [Sun May 6 20:36:11 2012] Source 49 is offset by -1.282229 and -6.435068 pixels which is larger than 2 X fitted extent = 0.703085 x 0.703085, not incorporating fit results [Sun May 6 20:36:11 2012] Warning, spatial fit 37 centroid is now closest to src. 2 [Sun May 6 20:36:11 2012] Vigneting correction estimate = 1.000000 [Sun May 6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 20:36:11 2012] Assessing source extent using major [Sun May 6 20:36:11 2012] Source does appear to be extended [Sun May 6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 7 07:46:05 2012] XMMSAS src. selection expression = ellipse(28082.292084, 9351.809113, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 7 07:46:05 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src49_src.reg [Mon May 7 07:46:05 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (286, 71) - (361, 146) [Mon May 7 07:46:05 2012] XMMSAS bgd. selection expression = annulus(28082.292084, 9351.809113, 1087.500000, 2175.000000, X, Y) && !ellipse(27689.908000, 9330.361400, 489.346414, 489.346414, 0.000000, X, Y) && !ellipse(27581.646484, 8563.282005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29167.112000, 8679.992000, 715.798421, 715.798421, 0.000000, X, Y) && !ellipse(27518.096000, 9796.876000, 1952.280056, 1952.280056, 0.000000, X, Y) && !ellipse(26764.242400, 8143.552000, 271.851208, 271.851208, 0.000000, X, Y) && !ellipse(26750.048828, 8742.178543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29837.992976, 9503.664600, 561.821616, 561.821616, 0.000000, X, Y) && !ellipse(26609.316345, 10562.359100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.836200, 9200.220000, 1361.328039, 1361.328039, 0.000000, X, Y) && !ellipse(27769.388916, 8909.038506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.539000, 11288.423000, 475.789614, 475.789614, 0.000000, X, Y) && !ellipse(28462.814000, 10628.496000, 2118.032061, 2118.032061, 0.000000, X, Y) && !ellipse(30001.360000, 10113.564000, 1899.128055, 1899.128055, 0.000000, X, Y) && !ellipse(26784.027893, 11696.409729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29925.425800, 11615.886400, 236.527207, 180.164005, 332.603000, X, Y) && !ellipse(29085.367462, 9884.019028, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 7 07:46:05 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src49.gif [Mon May 7 09:23:06 2012] Mean detx,y = (7124.47, 13962.07) [Mon May 7 09:23:10 2012] Setting backscal keywords in source and bgd. spectrum [Mon May 7 09:23:29 2012] Binned source spectrum to 10 counts/bin [Mon May 7 09:23:30 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src49_src_b10.pi.gz [Mon May 7 09:23:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src49_bgd.pi.gz [Mon May 7 12:53:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 7 12:53:52 2012] rmf not generated due to insufficient counts [Mon May 7 15:16:01 2012] Updating aperture counts using extracted products [Mon May 7 15:16:01 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src49_src_b10.pi.gz [Mon May 7 15:16:07 2012] Calculating source flux in energy range 0.30-8.00 [Mon May 7 15:16:07 2012] Using photon index=1.80, rate=0.0128, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src49.arf [Mon May 7 15:16:07 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 7 15:16:07 2012] Updating source flux to 4.2e-13 [Mon May 7 15:21:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting