[Thu May 3 13:41:10 2012] Detection parameters: Position = (325.5, 115.0) = 20 32 57.89 41 6 42.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 577.6 +/- 36.2 Background counts = 52.5 Rate = 0.02 +/- 0.001 [Thu May 3 13:41:15 2012] Off-axis axis estimate = 13.45' [Sat May 5 03:26:58 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting [Sat May 5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 13.15" [Sat May 5 03:26:58 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.987 [Sat May 5 03:26:58 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 13.15" [Sat May 5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src31.ximg exists [Sat May 5 14:40:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src31.csv [Sat May 5 14:40:29 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src31_1.ximg exists [Sat May 5 14:40:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src31.csv [Sat May 5 14:40:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Sat May 5 14:40:31 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Sat May 5 14:40:31 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Sat May 5 14:42:12 2012] Warning, spatial fit 31 centroid is now closest to src. 2 [Sat May 5 14:42:13 2012] Source 47 is offset by -4.220016 and -2.409184 pixels which is larger than 2 X fitted extent = 1.539683 x 1.539683, not incorporating fit results [Sat May 5 14:42:13 2012] Spatial fit model total counts = 2212.240000, observed total counts = 2168.000000 [Sat May 5 14:42:13 2012] Offset between fit and detection position for source 47 = 8.055075 pixels [Sat May 5 14:42:13 2012] Warning, changing simple spatial fit ID from 31 to 77 [Sat May 5 14:42:13 2012] 1044.084700 total counts/ 19.924700 bgd. counts: snr = 229.441469 Spatial fit parameters: Offset between fit and detection position for source 47 = 8.055075 pixels Position = (327.7, 122.7) = 20 32 57.06 41 7 14.0 Extent = 26.5 (24.5-53.0)", rotation angle = 0 Source counts = 1024.2 +/- 32.3 Background counts = 19.9 Rate = 0.04 +/- 0.001 [Sat May 5 14:42:13 2012] Vigneting correction estimate = 1.000000 [Sat May 5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 5 14:42:13 2012] Assessing source extent using major axis lower bound [Sat May 5 14:42:13 2012] Source does appear to be extended [Sat May 5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 14:42:13 2012] Source is confused with source 7 [Sun May 6 09:51:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 6 09:51:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 26.48" [Sun May 6 09:51:23 2012] source mask rpix=6.1, npix_max = 173, mask sum = 157, frac = 0.905 [Sun May 6 09:51:23 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 26.48" [Sun May 6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src28.ximg exists [Sun May 6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src28.csv [Sun May 6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src28_1.ximg exists [Sun May 6 20:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src28.csv [Sun May 6 20:34:46 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 20:34:50 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Sun May 6 20:34:50 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Sun May 6 20:34:50 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Sun May 6 20:36:11 2012] Source 47 is offset by -2.814897 and -2.807057 pixels which is larger than 2 X fitted extent = 0.683605 x 0.683605, not incorporating fit results [Sun May 6 20:36:11 2012] Warning, spatial fit 28 centroid is now closest to src. 46 [Sun May 6 20:36:11 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 14.061355 pixels away [Sun May 6 20:36:11 2012] Vigneting correction estimate = 1.000000 [Sun May 6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 20:36:11 2012] Assessing source extent using major axis lower bound [Sun May 6 20:36:11 2012] Source does appear to be extended [Sun May 6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 7 07:46:04 2012] Counts = 1024.160000, rescaling region sizes by 2.000000 [Mon May 7 07:46:04 2012] XMMSAS src. selection expression = ellipse(28462.814000, 10628.496000, 3177.048091, 3177.048091, 0.000000, X, Y) [Mon May 7 07:46:04 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src47_src.reg [Mon May 7 07:46:04 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (145, 0) - (510, 305) [Mon May 7 07:46:04 2012] XMMSAS bgd. selection expression = annulus(28462.814000, 10628.496000, 10590.160305, 21180.320609, X, Y) && !ellipse(24428.601200, 24526.853600, 1301.203237, 1301.203237, 0.000000, X, Y) && !ellipse(36321.405548, 23896.590607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25406.480800, 20083.846000, 366.394411, 366.394411, 0.000000, X, Y) && !ellipse(32143.958557, 19283.667038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31501.247650, 10668.742142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27689.908000, 9330.361400, 489.346414, 489.346414, 0.000000, X, Y) && !ellipse(27581.646484, 8563.282005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29167.112000, 8679.992000, 715.798421, 715.798421, 0.000000, X, Y) && !ellipse(32578.903000, 10356.633800, 558.487216, 558.487216, 0.000000, X, Y) && !ellipse(27518.096000, 9796.876000, 1952.280056, 1952.280056, 0.000000, X, Y) && !ellipse(26764.242400, 8143.552000, 271.851208, 271.851208, 0.000000, X, Y) && !ellipse(26750.048828, 8742.178543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29837.992976, 9503.664600, 561.821616, 561.821616, 0.000000, X, Y) && !ellipse(26609.316345, 10562.359100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.836200, 9200.220000, 1361.328039, 1361.328039, 0.000000, X, Y) && !ellipse(27769.388916, 8909.038506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.539000, 11288.423000, 475.789614, 475.789614, 0.000000, X, Y) && !ellipse(29330.371726, 14330.521107, 256.208961, 229.636007, -0.000000, X, Y) && !ellipse(21870.981140, 17103.213608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.528400, 26354.319600, 391.300811, 391.300811, 0.000000, X, Y) && !ellipse(30875.908600, 14434.335600, 1346.848039, 301.747209, 21.501675, X, Y) && !ellipse(22529.760000, 12977.324000, 420.407212, 420.407212, 0.000000, X, Y) && !ellipse(25852.024994, 17905.185120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.346130, 18902.339783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30985.872000, 11432.432000, 513.182415, 513.182415, 0.000000, X, Y) && !ellipse(32262.160461, 11154.731979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31706.571686, 12420.202576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30329.057526, 12540.918793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30001.360000, 10113.564000, 1899.128055, 1899.128055, 0.000000, X, Y) && !ellipse(26784.027893, 11696.409729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31599.698792, 12901.425308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32291.380000, 14111.194000, 613.108818, 613.108818, 0.000000, X, Y) && !ellipse(33726.780823, 13099.065689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34095.216583, 12404.480820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.292084, 9351.809113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32581.356049, 13715.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.544000, 11973.384000, 686.908820, 686.908820, 0.000000, X, Y) && !ellipse(19005.877960, 19570.491180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26846.468872, 31545.560089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33985.449707, 11625.904099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32708.865000, 12629.819400, 504.633615, 193.074099, 40.859000, X, Y) && !ellipse(29925.425800, 11615.886400, 236.527207, 180.164005, 332.603000, X, Y) && !ellipse(22187.817734, 12245.179062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33018.076000, 12223.730000, 2099.728060, 2099.728060, 0.000000, X, Y) && !ellipse(34115.793060, 11103.193878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.667542, 12723.895447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.390656, 26976.435211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18008.042282, 30421.935760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14645.545600, 31718.499200, 482.822414, 482.822414, 0.000000, X, Y) && !ellipse(17097.699112, 15250.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25014.259705, 19994.407761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.551200, 23968.339800, 339.540010, 339.540010, 0.000000, X, Y) && !ellipse(28379.450928, 27447.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22825.642059, 23177.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14704.755722, 27055.369232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.886000, 24647.087600, 2089.312060, 2089.312060, 0.000000, X, Y) && !ellipse(24857.312958, 20723.567749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.188812, 22326.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13628.270111, 30203.798553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21006.274360, 21332.478600, 469.577691, 469.577691, 0.000000, X, Y) && !ellipse(22941.298000, 24494.188000, 1044.656030, 1044.656030, 0.000000, X, Y) && !ellipse(29085.367462, 9884.019028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23584.545013, 22836.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.346130, 14130.698563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.650700, 14504.059000, 635.086418, 366.849611, 0.000000, X, Y) && !ellipse(38163.241852, 27863.796448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23813.514740, 27794.399292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35811.740814, 21718.640869, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 7 07:46:04 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src47.gif [Mon May 7 08:54:08 2012] Mean detx,y = (7307.56, 13122.49) [Mon May 7 08:54:12 2012] Setting backscal keywords in source and bgd. spectrum [Mon May 7 09:07:49 2012] Binned source spectrum to 10 counts/bin [Mon May 7 09:07:49 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src47_src_b10.pi.gz [Mon May 7 09:07:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src47_bgd.pi.gz [Mon May 7 15:16:00 2012] Updating aperture counts using extracted products [Mon May 7 15:16:01 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src47_src_b10.pi.gz [Mon May 7 15:16:06 2012] Calculating source flux in energy range 0.30-8.00 [Mon May 7 15:16:06 2012] Using photon index=1.80, rate=0.0383, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src47.arf [Mon May 7 15:16:06 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 7 15:16:06 2012] Updating source flux to 9e-13 [Mon May 7 15:21:24 2012] Flag b found in src. 47 procflags, skipping spectral fitting [Mon May 7 15:21:24 2012] Flag c found in src. 47 procflags, skipping spectral fitting