[Thu May  3 13:41:10 2012] Detection parameters:
  Position = (317.3, 114.9) = 20 33 1.06 41 6 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1411.0 +/- 50.9
  Background counts = 54.3
  Rate = 0.04 +/- 0.002

[Thu May  3 13:41:15 2012] Off-axis axis estimate = 13.38'
[Sat May  5 03:26:58 2012] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Sat May  5 03:26:58 2012] Initial guess for spatial extent in simple fitting = 13.12"
[Sat May  5 03:26:58 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Sat May  5 03:26:58 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.12"
[Sat May  5 14:40:28 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src10.ximg exists
[Sat May  5 14:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src10.csv
[Sat May  5 14:40:28 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat May  5 14:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src10.csv
[Sat May  5 14:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat May  5 14:40:30 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May  5 14:40:30 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat May  5 14:42:12 2012] Warning, spatial fit 10 centroid is now closest to src. 2
[Sat May  5 14:42:13 2012] Vigneting correction estimate = 1.000000
[Sat May  5 14:42:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 14:42:13 2012] Assessing source extent using major
[Sat May  5 14:42:13 2012] Source does appear to be extended
[Sat May  5 14:42:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 14:42:13 2012] Source is confused with source 7
[Sun May  6 09:51:23 2012] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:51:23 2012] Initial guess for spatial extent in simple fitting = 13.12"
[Sun May  6 09:51:23 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Sun May  6 09:51:23 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.12"
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src10.ximg exists
[Sun May  6 20:34:46 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May  6 20:34:46 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun May  6 20:34:49 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May  6 20:34:49 2012] fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May  6 20:34:49 2012] Fit fullrun_mos2_xmm0505110401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun May  6 20:36:11 2012] Warning, spatial fit 10 centroid is now closest to src. 42
[Sun May  6 20:36:11 2012] Spatial fit model total counts = 9275.180000, observed total counts = 9169.000000
[Sun May  6 20:36:11 2012] Offset between fit and detection position for source 46 = 1.807814 pixels
[Sun May  6 20:36:11 2012] Warning, changing simple spatial fit ID from 10 to 28
[Sun May  6 20:36:11 2012] 9063.090000 total counts/ 5996.740000 bgd. counts: snr = 39.597167
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.807814 pixels
  Position = (316.9, 113.2) = 20 33 1.24 41 6 32.5
  Extent = 24.4 (23.0-26.1)", rotation angle = 0
  Source counts = 3066.3 +/- 95.2
  Background counts = 5996.7
  Rate = 0.1 +/- 0.004
[Sun May  6 20:36:11 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:36:11 2012] Assessing source extent using major axis lower bound
[Sun May  6 20:36:11 2012] Source does appear to be extended
[Sun May  6 20:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:46:02 2012] Counts = 3066.350000, rescaling region sizes by 2.000000
[Mon May  7 07:46:02 2012] XMMSAS src. selection expression = ellipse(27518.096000, 9796.876000, 2928.420084, 2928.420084, 0.000000, X, Y)
[Mon May  7 07:46:02 2012] Writing source region out to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src46_src.reg
[Mon May  7 07:46:02 2012] Extracting stamp from image fullrun_mos2_xmm0505110401_pi300-10000_cl_sm2.00.img.gz, (149, 0) - (485, 281)
[Mon May  7 07:46:02 2012] XMMSAS bgd. selection expression = annulus(27518.096000, 9796.876000, 9761.400281, 19522.800562, X, Y) && !ellipse(24428.601200, 24526.853600, 1301.203237, 1301.203237, 0.000000, X, Y) && !ellipse(36321.405548, 23896.590607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25406.480800, 20083.846000, 366.394411, 366.394411, 0.000000, X, Y) && !ellipse(32143.958557, 19283.667038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31501.247650, 10668.742142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27689.908000, 9330.361400, 489.346414, 489.346414, 0.000000, X, Y) && !ellipse(27581.646484, 8563.282005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29167.112000, 8679.992000, 715.798421, 715.798421, 0.000000, X, Y) && !ellipse(32578.903000, 10356.633800, 558.487216, 558.487216, 0.000000, X, Y) && !ellipse(26764.242400, 8143.552000, 271.851208, 271.851208, 0.000000, X, Y) && !ellipse(26750.048828, 8742.178543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29837.992976, 9503.664600, 561.821616, 561.821616, 0.000000, X, Y) && !ellipse(26609.316345, 10562.359100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.836200, 9200.220000, 1361.328039, 1361.328039, 0.000000, X, Y) && !ellipse(27769.388916, 8909.038506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.539000, 11288.423000, 475.789614, 475.789614, 0.000000, X, Y) && !ellipse(29330.371726, 14330.521107, 256.208961, 229.636007, -0.000000, X, Y) && !ellipse(21870.981140, 17103.213608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.528400, 26354.319600, 391.300811, 391.300811, 0.000000, X, Y) && !ellipse(30875.908600, 14434.335600, 1346.848039, 301.747209, 21.501675, X, Y) && !ellipse(22529.760000, 12977.324000, 420.407212, 420.407212, 0.000000, X, Y) && !ellipse(25852.024994, 17905.185120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.346130, 18902.339783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30985.872000, 11432.432000, 513.182415, 513.182415, 0.000000, X, Y) && !ellipse(32262.160461, 11154.731979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.814000, 10628.496000, 2118.032061, 2118.032061, 0.000000, X, Y) && !ellipse(31706.571686, 12420.202576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30329.057526, 12540.918793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30001.360000, 10113.564000, 1899.128055, 1899.128055, 0.000000, X, Y) && !ellipse(26784.027893, 11696.409729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31599.698792, 12901.425308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32291.380000, 14111.194000, 613.108818, 613.108818, 0.000000, X, Y) && !ellipse(33726.780823, 13099.065689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34095.216583, 12404.480820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.292084, 9351.809113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32581.356049, 13715.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.544000, 11973.384000, 686.908820, 686.908820, 0.000000, X, Y) && !ellipse(19005.877960, 19570.491180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33985.449707, 11625.904099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32708.865000, 12629.819400, 504.633615, 193.074099, 40.859000, X, Y) && !ellipse(29925.425800, 11615.886400, 236.527207, 180.164005, 332.603000, X, Y) && !ellipse(22187.817734, 12245.179062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33018.076000, 12223.730000, 2099.728060, 2099.728060, 0.000000, X, Y) && !ellipse(34115.793060, 11103.193878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.667542, 12723.895447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.390656, 26976.435211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17097.699112, 15250.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25014.259705, 19994.407761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.551200, 23968.339800, 339.540010, 339.540010, 0.000000, X, Y) && !ellipse(28379.450928, 27447.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22825.642059, 23177.810455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14704.755722, 27055.369232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.886000, 24647.087600, 2089.312060, 2089.312060, 0.000000, X, Y) && !ellipse(24857.312958, 20723.567749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.188812, 22326.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21006.274360, 21332.478600, 469.577691, 469.577691, 0.000000, X, Y) && !ellipse(22941.298000, 24494.188000, 1044.656030, 1044.656030, 0.000000, X, Y) && !ellipse(29085.367462, 9884.019028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23584.545013, 22836.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.346130, 14130.698563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.650700, 14504.059000, 635.086418, 366.849611, 0.000000, X, Y) && !ellipse(38163.241852, 27863.796448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23813.514740, 27794.399292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35811.740814, 21718.640869, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 07:46:02 2012] Writing fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src46.gif
[Mon May  7 08:17:22 2012] Mean detx,y = (6839.57, 13674.00) 
[Mon May  7 08:17:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 08:27:59 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 08:28:00 2012] Setting source spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon May  7 08:28:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Mon May  7 15:15:59 2012] Updating aperture counts using extracted products
[Mon May  7 15:15:59 2012] Error reading totcts from fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon May  7 15:16:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon May  7 15:16:05 2012] Using photon index=1.80, rate=0.115, arf fullrun_mos2_xmm0505110401_pi300-10000_pass1_cl_src46.arf
[Mon May  7 15:16:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  7 15:16:05 2012] Updating source flux to 2.8e-12
[Mon May  7 15:21:24 2012] Flag c found in src. 46 procflags, skipping spectral fitting